Fix several errors and warnings given by checkpatch.pl:
- use of C99 // comments;
- initialization of a 'static' variable to 0;
- space after opening and before closing parentheses;
- missing space between 'for' and opening parenthesis;
- macros with complex values not enclosed in parentheses;
- printk() without KERN_* facility level;
- unnecessary braces for single-statement block;
- using simple_strtol() where strict_strtol() could be used;
- line over 80 characters.
In addition to these changes, also do the following:
- mention DBAu1200 board in the Makefile;
- replace the group of #include/#ifdef directives by single #include <au1xxx.h>
since this header contains the needed stuff;
- properly indent the blocks;
- insert spaces between operator and its operands, remove excess spaces there;
- remove needless parentheses and add some for clarity;
- replace numeric literals/expressions with the matching macros;
- remove space after the type cast's closing parenthesis;
- reduce pb1200_setup_cascade() to the single 'return' statement;
- reduce the number of printed empty lines in the so-called CPLD workaround;
- remove #undef AU1X00_EXTERNAL_INT since that macro is not defined anywhere;
- replace spaces after the macro name with tabs in the #define directives;
- remove excess tabs after the macro name in the #define directives;
- fix typo in the BCSR_RESETS_PWMR1mUX macro's name;
- group all Pb1200 PCMCIA definitions together;
- put the function's result type and name/parameters on the same line;
- insert missing and remove excess new lines;
- make the multi-line comment style consistent with the kernel style elsewhere
by adding empty first line and/or adding space/asterisk on their left side;
- fix typos/errors, capitalize acronyms, etc. in the comments;
- combine some comments;
- update MontaVista copyright;
- remove Pete Popov's old email address...
Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
arch/mips/au1000/pb1200/Makefile | 2
arch/mips/au1000/pb1200/board_setup.c | 131 ++++++++++++++++------------------
arch/mips/au1000/pb1200/init.c | 18 ++--
arch/mips/au1000/pb1200/irqmap.c | 66 +++++++----------
include/asm-mips/mach-db1x00/db1200.h | 75 +++++++++----------
include/asm-mips/mach-pb1x00/pb1200.h | 93 +++++++++++-------------
6 files changed, 183 insertions(+), 202 deletions(-)
Index: linux-2.6/arch/mips/au1000/pb1200/Makefile
===================================================================
--- linux-2.6.orig/arch/mips/au1000/pb1200/Makefile
+++ linux-2.6/arch/mips/au1000/pb1200/Makefile
@@ -1,5 +1,5 @@
#
-# Makefile for the Alchemy Semiconductor PB1200 board.
+# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
#
lib-y := init.o board_setup.o irqmap.o
Index: linux-2.6/arch/mips/au1000/pb1200/board_setup.c
===================================================================
--- linux-2.6.orig/arch/mips/au1000/pb1200/board_setup.c
+++ linux-2.6/arch/mips/au1000/pb1200/board_setup.c
@@ -27,16 +27,8 @@
#include <linux/init.h>
#include <linux/sched.h>
-#include <au1000.h>
#include <prom.h>
-
-#ifdef CONFIG_MIPS_PB1200
-#include <asm/mach-pb1x00/pb1200.h>
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#include <asm/mach-db1x00/db1200.h>
-#endif
+#include <au1xxx.h>
extern void _board_init_irq(void);
extern void (*board_init_irq)(void);
@@ -53,56 +45,57 @@ void __init board_setup(void)
#if 0
{
- u32 pin_func;
+ u32 pin_func;
- /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
- * but it is board specific code, so put it here.
- */
- pin_func = au_readl(SYS_PINFUNC);
- au_sync();
- pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
- au_writel(pin_func, SYS_PINFUNC);
+ /*
+ * Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ * but it is board specific code, so put it here.
+ */
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+ au_writel(pin_func, SYS_PINFUNC);
- au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
- au_sync();
+ au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
+ au_sync();
}
#endif
#if defined(CONFIG_I2C_AU1550)
{
- u32 freq0, clksrc;
- u32 pin_func;
-
- /* Select SMBUS in CPLD */
- bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
-
- pin_func = au_readl(SYS_PINFUNC);
- au_sync();
- pin_func &= ~(3<<17 | 1<<4);
- /* Set GPIOs correctly */
- pin_func |= 2<<17;
- au_writel(pin_func, SYS_PINFUNC);
- au_sync();
+ u32 freq0, clksrc;
+ u32 pin_func;
- /* The i2c driver depends on 50Mhz clock */
- freq0 = au_readl(SYS_FREQCTRL0);
- au_sync();
- freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
- freq0 |= (3<<SYS_FC_FRDIV1_BIT);
- /* 396Mhz / (3+1)*2 == 49.5Mhz */
- au_writel(freq0, SYS_FREQCTRL0);
- au_sync();
- freq0 |= SYS_FC_FE1;
- au_writel(freq0, SYS_FREQCTRL0);
- au_sync();
+ /* Select SMBus in CPLD */
+ bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
- clksrc = au_readl(SYS_CLKSRC);
- au_sync();
- clksrc &= ~0x01f00000;
- /* bit 22 is EXTCLK0 for PSC0 */
- clksrc |= (0x3 << 22);
- au_writel(clksrc, SYS_CLKSRC);
- au_sync();
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+ /* Set GPIOs correctly */
+ pin_func |= 2 << 17;
+ au_writel(pin_func, SYS_PINFUNC);
+ au_sync();
+
+ /* The I2C driver depends on 50 MHz clock */
+ freq0 = au_readl(SYS_FREQCTRL0);
+ au_sync();
+ freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
+ freq0 |= 3 << SYS_FC_FRDIV1_BIT;
+ /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+ freq0 |= SYS_FC_FE1;
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+
+ clksrc = au_readl(SYS_CLKSRC);
+ au_sync();
+ clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK);
+ /* Bit 22 is EXTCLK0 for PSC0 */
+ clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT;
+ au_writel(clksrc, SYS_CLKSRC);
+ au_sync();
}
#endif
@@ -116,27 +109,27 @@ void __init board_setup(void)
#endif
#endif
- /* The Pb1200 development board uses external MUX for PSC0 to
- support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
- */
+ /*
+ * The Pb1200 development board uses external MUX for PSC0 to
+ * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+ */
#ifdef CONFIG_I2C_AU1550
- bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
+ bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
#endif
au_sync();
#ifdef CONFIG_MIPS_PB1200
- printk("AMD Alchemy Pb1200 Board\n");
+ printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1200
- printk("AMD Alchemy Db1200 Board\n");
+ printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
#endif
/* Setup Pb1200 External Interrupt Controller */
board_init_irq = _board_init_irq;
}
-int
-board_au1200fb_panel(void)
+int board_au1200fb_panel(void)
{
BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
int p;
@@ -147,23 +140,23 @@ board_au1200fb_panel(void)
return p;
}
-int
-board_au1200fb_panel_init(void)
+int board_au1200fb_panel_init(void)
{
/* Apply power */
- BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
- bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
- /*printk("board_au1200fb_panel_init()\n"); */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+ bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL;
+ /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
return 0;
}
-int
-board_au1200fb_panel_shutdown(void)
+int board_au1200fb_panel_shutdown(void)
{
/* Remove power */
- BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
- bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
- /*printk("board_au1200fb_panel_shutdown()\n"); */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+ bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+ BCSR_BOARD_LCDBL);
+ /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
return 0;
}
-
Index: linux-2.6/arch/mips/au1000/pb1200/init.c
===================================================================
--- linux-2.6.orig/arch/mips/au1000/pb1200/init.c
+++ linux-2.6/arch/mips/au1000/pb1200/init.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* PB1200 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@xxxxxxxxxx or source@xxxxxxxxxx
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -45,16 +44,15 @@ void __init prom_init(void)
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x08000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
Index: linux-2.6/arch/mips/au1000/pb1200/irqmap.c
===================================================================
--- linux-2.6.orig/arch/mips/au1000/pb1200/irqmap.c
+++ linux-2.6/arch/mips/au1000/pb1200/irqmap.c
@@ -39,25 +39,25 @@
#endif
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
+ /* This is external interrupt cascade */
+ { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 },
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
/*
- * Support for External interrupts on the PbAu1200 Development platform.
+ * Support for External interrupts on the Pb1200 Development platform.
*/
-static volatile int pb1200_cascade_en=0;
+static volatile int pb1200_cascade_en;
-irqreturn_t pb1200_cascade_handler( int irq, void *dev_id)
+irqreturn_t pb1200_cascade_handler(int irq, void *dev_id)
{
unsigned short bisr = bcsr->int_status;
int extirq_nr = 0;
- /* Clear all the edge interrupts. This has no effect on level */
+ /* Clear all the edge interrupts. This has no effect on level. */
bcsr->int_status = bisr;
- for( ; bisr; bisr &= (bisr-1) )
- {
+ for ( ; bisr; bisr &= bisr - 1) {
extirq_nr = PB1200_INT_BEGIN + __ffs(bisr);
/* Ack and dispatch IRQ */
do_IRQ(extirq_nr);
@@ -68,26 +68,20 @@ irqreturn_t pb1200_cascade_handler( int
inline void pb1200_enable_irq(unsigned int irq_nr)
{
- bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
- bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
}
inline void pb1200_disable_irq(unsigned int irq_nr)
{
- bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
- bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
}
static unsigned int pb1200_setup_cascade(void)
{
- int err;
-
- err = request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
- 0, "Pb1200 Cascade", &pb1200_cascade_handler);
- if (err)
- return err;
-
- return 0;
+ return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+ 0, "Pb1200 Cascade", &pb1200_cascade_handler);
}
static unsigned int pb1200_startup_irq(unsigned int irq)
@@ -132,23 +126,23 @@ void _board_init_irq(void)
unsigned int irq;
#ifdef CONFIG_MIPS_PB1200
- /* We have a problem with CPLD rev3. Enable a workaround */
+ /* We have a problem with CPLD rev 3. */
if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
- printk("updated to latest revision. This software will not\n");
- printk("work on anything less than CPLD rev4\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
+ printk(KERN_ERR "updated to latest revision. This software will\n");
+ printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
panic("Game over. Your score is 0.");
}
#endif
@@ -161,6 +155,6 @@ void _board_init_irq(void)
/*
* GPIO_7 can not be hooked here, so it is hooked upon first
- * request of any source attached to the cascade
+ * request of any source attached to the cascade.
*/
}
Index: linux-2.6/include/asm-mips/mach-db1x00/db1200.h
===================================================================
--- linux-2.6.orig/include/asm-mips/mach-db1x00/db1200.h
+++ linux-2.6/include/asm-mips/mach-db1x00/db1200.h
@@ -1,6 +1,6 @@
/*
- * AMD Alchemy DB1200 Referrence Board
- * Board Registers defines.
+ * AMD Alchemy DBAu1200 Reference Board
+ * Board register defines.
*
* ########################################################################
*
@@ -27,26 +27,25 @@
#include <linux/types.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-// This is defined in au1000.h with bogus value
-#undef AU1X00_EXTERNAL_INT
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-
-/* SPI and SMB are muxed on the Pb1200 board.
- Refer to board documentation.
- */
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define SMBUS_PSC_BASE PSC0_BASE_ADDR
-/* AC97 and I2S are muxed on the Pb1200 board.
- Refer to board documentation.
+/*
+ * SPI and SMB are muxed on the DBAu1200 board.
+ * Refer to board documentation.
+ */
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/*
+ * AC'97 and I2S are muxed on the DBAu1200 board.
+ * Refer to board documentation.
*/
-#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define AC97_PSC_BASE PSC1_BASE_ADDR
#define I2S_PSC_BASE PSC1_BASE_ADDR
-#define BCSR_KSEG1_ADDR 0xB9800000
+#define BCSR_KSEG1_ADDR 0xB9800000
typedef volatile struct
{
@@ -102,9 +101,9 @@ static BCSR * const bcsr = (BCSR *)BCSR_
#define BCSR_STATUS_SWAPBOOT 0x0040
#define BCSR_STATUS_FLASHBUSY 0x0100
#define BCSR_STATUS_IDECBLID 0x0200
-#define BCSR_STATUS_SD0WP 0x0400
-#define BCSR_STATUS_U0RXD 0x1000
-#define BCSR_STATUS_U1RXD 0x2000
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
#define BCSR_SWITCHES_OCTAL 0x00FF
#define BCSR_SWITCHES_DIP_1 0x0080
@@ -122,8 +121,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_
#define BCSR_RESETS_DC 0x0004
#define BCSR_RESETS_IDE 0x0008
#define BCSR_RESETS_TV 0x0010
-/* not resets but in the same register */
-#define BCSR_RESETS_PWMR1mUX 0x0800
+/* Not resets but in the same register */
+#define BCSR_RESETS_PWMR1MUX 0x0800
#define BCSR_RESETS_PCS0MUX 0x1000
#define BCSR_RESETS_PCS1MUX 0x2000
#define BCSR_RESETS_SPISEL 0x4000
@@ -160,7 +159,7 @@ static BCSR * const bcsr = (BCSR *)BCSR_
#define BCSR_INT_PC0STSCHG 0x0008
#define BCSR_INT_PC1 0x0010
#define BCSR_INT_PC1STSCHG 0x0020
-#define BCSR_INT_DC 0x0040
+#define BCSR_INT_DC 0x0040
#define BCSR_INT_FLASHBUSY 0x0080
#define BCSR_INT_PC0INSERT 0x0100
#define BCSR_INT_PC0EJECT 0x0200
@@ -179,10 +178,10 @@ static BCSR * const bcsr = (BCSR *)BCSR_
#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
#define IDE_RQSIZE 128
-#define NAND_PHYS_ADDR 0x20000000
+#define NAND_PHYS_ADDR 0x20000000
/*
- * External Interrupts for Pb1200 as of 8/6/2004.
+ * External Interrupts for DBAu1200 as of 8/6/2004.
* Bit positions in the CPLD registers can be calculated by taking
* the interrupt define and subtracting the DB1200_INT_BEGIN value.
*
@@ -211,23 +210,21 @@ enum external_pb1200_ints {
};
-/* For drivers/pcmcia/au1000_db1x00.c */
-
-/* PCMCIA Db1x00 specific defines */
-
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+/*
+ * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
+ */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-#define BOARD_PC0_INT DB1200_PC0_INT
-#define BOARD_PC1_INT DB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+#define BOARD_PC0_INT DB1200_PC0_INT
+#define BOARD_PC1_INT DB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
-/* Nand chip select */
+/* NAND chip select */
#define NAND_CS 1
#endif /* __ASM_DB1200_H */
-
Index: linux-2.6/include/asm-mips/mach-pb1x00/pb1200.h
===================================================================
--- linux-2.6.orig/include/asm-mips/mach-pb1x00/pb1200.h
+++ linux-2.6/include/asm-mips/mach-pb1x00/pb1200.h
@@ -1,5 +1,5 @@
/*
- * AMD Alchemy PB1200 Referrence Board
+ * AMD Alchemy Pb1200 Referrence Board
* Board Registers defines.
*
* ########################################################################
@@ -27,21 +27,20 @@
#include <linux/types.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-// This is defined in au1000.h with bogus value
-#undef AU1X00_EXTERNAL_INT
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-
-/* SPI and SMB are muxed on the Pb1200 board.
- Refer to board documentation.
+/*
+ * SPI and SMB are muxed on the Pb1200 board.
+ * Refer to board documentation.
*/
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define SMBUS_PSC_BASE PSC0_BASE_ADDR
-/* AC97 and I2S are muxed on the Pb1200 board.
- Refer to board documentation.
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/*
+ * AC97 and I2S are muxed on the Pb1200 board.
+ * Refer to board documentation.
*/
#define AC97_PSC_BASE PSC1_BASE_ADDR
#define I2S_PSC_BASE PSC1_BASE_ADDR
@@ -102,10 +101,10 @@ static BCSR * const bcsr = (BCSR *)BCSR_
#define BCSR_STATUS_SWAPBOOT 0x0040
#define BCSR_STATUS_FLASHBUSY 0x0100
#define BCSR_STATUS_IDECBLID 0x0200
-#define BCSR_STATUS_SD0WP 0x0400
-#define BCSR_STATUS_SD1WP 0x0800
-#define BCSR_STATUS_U0RXD 0x1000
-#define BCSR_STATUS_U1RXD 0x2000
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_SD1WP 0x0800
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
#define BCSR_SWITCHES_OCTAL 0x00FF
#define BCSR_SWITCHES_DIP_1 0x0080
@@ -123,11 +122,11 @@ static BCSR * const bcsr = (BCSR *)BCSR_
#define BCSR_RESETS_DC 0x0004
#define BCSR_RESETS_IDE 0x0008
/* not resets but in the same register */
-#define BCSR_RESETS_WSCFSM 0x0800
+#define BCSR_RESETS_WSCFSM 0x0800
#define BCSR_RESETS_PCS0MUX 0x1000
#define BCSR_RESETS_PCS1MUX 0x2000
#define BCSR_RESETS_SPISEL 0x4000
-#define BCSR_RESETS_SD1MUX 0x8000
+#define BCSR_RESETS_SD1MUX 0x8000
#define BCSR_PCMCIA_PC0VPP 0x0003
#define BCSR_PCMCIA_PC0VCC 0x000C
@@ -163,7 +162,7 @@ static BCSR * const bcsr = (BCSR *)BCSR_
#define BCSR_INT_PC0STSCHG 0x0008
#define BCSR_INT_PC1 0x0010
#define BCSR_INT_PC1STSCHG 0x0020
-#define BCSR_INT_DC 0x0040
+#define BCSR_INT_DC 0x0040
#define BCSR_INT_FLASHBUSY 0x0080
#define BCSR_INT_PC0INSERT 0x0100
#define BCSR_INT_PC0EJECT 0x0200
@@ -174,14 +173,6 @@ static BCSR * const bcsr = (BCSR *)BCSR_
#define BCSR_INT_SD1INSERT 0x4000
#define BCSR_INT_SD1EJECT 0x8000
-/* PCMCIA Db1x00 specific defines */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
-
#define SMC91C111_PHYS_ADDR 0x0D000300
#define SMC91C111_INT PB1200_ETH_INT
@@ -192,18 +183,19 @@ static BCSR * const bcsr = (BCSR *)BCSR_
#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
#define IDE_RQSIZE 128
-#define NAND_PHYS_ADDR 0x1C000000
+#define NAND_PHYS_ADDR 0x1C000000
-/* Timing values as described in databook, * ns value stripped of
+/*
+ * Timing values as described in databook, * ns value stripped of
* lower 2 bits.
- * These defines are here rather than an SOC1200 generic file because
+ * These defines are here rather than an Au1200 generic file because
* the parts chosen on another board may be different and may require
* different timings.
*/
-#define NAND_T_H (18 >> 2)
-#define NAND_T_PUL (30 >> 2)
-#define NAND_T_SU (30 >> 2)
-#define NAND_T_WH (30 >> 2)
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
/* Bitfield shift amounts */
#define NAND_T_H_SHIFT 0
@@ -211,11 +203,10 @@ static BCSR * const bcsr = (BCSR *)BCSR_
#define NAND_T_SU_SHIFT 8
#define NAND_T_WH_SHIFT 12
-#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
- ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
- ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
- ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
-
+#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT))
/*
* External Interrupts for Pb1200 as of 8/6/2004.
@@ -248,13 +239,21 @@ enum external_pb1200_ints {
PB1200_INT_END = PB1200_INT_BEGIN + 15
};
-/* For drivers/pcmcia/au1000_db1x00.c */
-#define BOARD_PC0_INT PB1200_PC0_INT
-#define BOARD_PC1_INT PB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+/*
+ * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
+ */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-/* Nand chip select */
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+#define BOARD_PC0_INT PB1200_PC0_INT
+#define BOARD_PC1_INT PB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
+
+/* NAND chip select */
#define NAND_CS 1
#endif /* __ASM_PB1200_H */
-
