The Alchemy platform code registers the SMBus device using the virtual address
of its registers instead of the physical one -- fix this, taking into account
that actually the whole megabyte is decoded by any of the programmable serial
controllers (one of which is SMBus), and that all the Alchemy peripherals are
directly mappable into KSEG1 kernel space and therefore ioremap() call would
just boil down to CKSEG1ADDR() invocation.
Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
---
I'm not sure thru which tree this should go -- probably thru Linux/MIPS one...
arch/mips/au1000/common/platform.c | 4 ++--
drivers/i2c/busses/i2c-au1550.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
Index: linux-2.6/arch/mips/au1000/common/platform.c
===================================================================
--- linux-2.6.orig/arch/mips/au1000/common/platform.c
+++ linux-2.6/arch/mips/au1000/common/platform.c
@@ -274,8 +274,8 @@ static struct platform_device smc91x_dev
#ifdef SMBUS_PSC_BASE
static struct resource pbdb_smbus_resources[] = {
{
- .start = SMBUS_PSC_BASE,
- .end = SMBUS_PSC_BASE + 0x24 - 1,
+ .start = CPHYSADDR(SMBUS_PSC_BASE),
+ .end = CPHYSADDR(SMBUS_PSC_BASE + 0xfffff),
.flags = IORESOURCE_MEM,
},
};
Index: linux-2.6/drivers/i2c/busses/i2c-au1550.c
===================================================================
--- linux-2.6.orig/drivers/i2c/busses/i2c-au1550.c
+++ linux-2.6/drivers/i2c/busses/i2c-au1550.c
@@ -335,7 +335,7 @@ i2c_au1550_probe(struct platform_device
goto out_mem;
}
- priv->psc_base = r->start;
+ priv->psc_base = CKSEG1ADDR(r->start);
priv->xfer_timeout = 200;
priv->ack_timeout = 200;
