Work around the CPU clock miscalculation on Au1000DA/HA/HB due the sys_cpupll
register being write-only, i.e. actually do what the comment before cal_r4off()
function advertised for years but code failed at. This is achieved by simply
giving user a chance to define the clock explicitly in the board config. via
CONFIG_SOC_AU1X00_FREQUENCY option, defaulting to 396 MHz if the option is not
given...
The patch is based on the AMD's own unpublished patch, the issue seems to be an
undocumented errata (or feature :-)...
Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
---
That's what comes of a dozen line change when you do it properly. ;-)
arch/mips/au1000/common/cputable.c | 36 +++++++++++++++++-----------------
arch/mips/au1000/common/setup.c | 18 +++++++++++------
arch/mips/au1000/common/time.c | 24 +++++++++++++---------
include/asm-mips/mach-au1x00/au1000.h | 1
4 files changed, 45 insertions(+), 34 deletions(-)
Index: linux-2.6/arch/mips/au1000/common/cputable.c
===================================================================
--- linux-2.6.orig/arch/mips/au1000/common/cputable.c
+++ linux-2.6/arch/mips/au1000/common/cputable.c
@@ -22,24 +22,24 @@ struct cpu_spec* cur_cpu_spec[NR_CPUS];
/* With some thought, we can probably use the mask to reduce the
* size of the table.
*/
-struct cpu_spec cpu_specs[] = {
- { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0 },
- { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0 },
- { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0 },
- { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1 },
- { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1 },
- { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1 },
- { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1 },
- { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1 },
- { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1 },
- { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1 },
- { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1 },
- { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
- { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
- { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
- { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
- { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0 },
- { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
+struct cpu_spec cpu_specs[] = {
+ { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 },
+ { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 },
+ { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 },
+ { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 },
+ { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 },
+ { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 },
+ { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 },
+ { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 },
+ { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 },
+ { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 },
+ { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 },
+ { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 },
+ { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 },
+ { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 },
+ { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 },
+ { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 },
+ { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
};
void
Index: linux-2.6/arch/mips/au1000/common/setup.c
===================================================================
--- linux-2.6.orig/arch/mips/au1000/common/setup.c
+++ linux-2.6/arch/mips/au1000/common/setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@xxxxxxxxxx or source@xxxxxxxxxx
+ * Copyright (C) 2000, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
*
* Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc.
*
@@ -57,7 +56,7 @@ void __init plat_mem_setup(void)
{
struct cpu_spec *sp;
char *argptr;
- unsigned long prid, cpupll, bclk = 1;
+ unsigned long prid, cpufreq, bclk = 1;
set_cpuspec();
sp = cur_cpu_spec[0];
@@ -65,8 +64,15 @@ void __init plat_mem_setup(void)
board_setup(); /* board specific setup */
prid = read_c0_prid();
- cpupll = (au_readl(0xB1900060) & 0x3F) * 12;
- printk("(PRId %08lx) @ %ldMHZ\n", prid, cpupll);
+ if (cur_cpu_spec[0]->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1X00_FREQUENCY
+ cpufreq = CONFIG_SOC_AU1X00_FREQUENCY / 1000000;
+#else
+ cpufreq = 396;
+#endif
+ else
+ cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
+ printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
bclk = sp->cpu_bclk;
if (bclk)
Index: linux-2.6/arch/mips/au1000/common/time.c
===================================================================
--- linux-2.6.orig/arch/mips/au1000/common/time.c
+++ linux-2.6/arch/mips/au1000/common/time.c
@@ -209,18 +209,22 @@ unsigned long cal_r4koff(void)
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
au_writel(0, SYS_TOYWRITE);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
+ } else
+ no_au1xxx_32khz = 1;
- cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
- AU1000_SRC_CLK;
- }
- else {
- /* The 32KHz oscillator isn't running, so assume there
- * isn't one and grab the processor speed from the PLL.
- * NOTE: some old silicon doesn't allow reading the PLL.
- */
+ /*
+ * On early Au1000, sys_cpupll was write-only. Since these
+ * silicon versions of Au1000 are not sold by AMD, we don't bend
+ * over backwards trying to determine the frequency.
+ */
+ if (cur_cpu_spec[0]->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1X00_FREQUENCY
+ cpu_speed = CONFIG_SOC_AU1X00_FREQUENCY;
+#else
+ cpu_speed = 396000000;
+#endif
+ else
cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
- no_au1xxx_32khz = 1;
- }
mips_hpt_frequency = cpu_speed;
// Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
Index: linux-2.6/include/asm-mips/mach-au1x00/au1000.h
===================================================================
--- linux-2.6.orig/include/asm-mips/mach-au1x00/au1000.h
+++ linux-2.6/include/asm-mips/mach-au1x00/au1000.h
@@ -1778,6 +1778,7 @@ struct cpu_spec {
char *cpu_name;
unsigned char cpu_od; /* Set Config[OD] */
unsigned char cpu_bclk; /* Enable BCLK switching */
+ unsigned char cpu_pll_wo; /* sys_cpupll reg. write-only */
};
extern struct cpu_spec cpu_specs[];
