Hello. Nico Coesel wrote:
Sergei, I'm using kernel 2.6.24 now (before I used 2.6.21-rc4). I do see the console messages on the framebuffer device.
Kernel options: console=ttyS0 root=/dev/mtdblock0 rootfstype=jffs2 rw video=au1100fb:panel:KERN_AU1100 tsdev.xres=320 tsdev.yres=234 console=tty0
If I omit console=tty0, then there is no output on the framebuffer
You're specifying console twice, but without a baud rate. Also, do you have CONFIG_SERIAL_8250_CONSOLE enabled?
device or the serial port. I also tried setting the I/O address and so on, but no luck.
Nico Coesel
WBR, Sergei
