Reformat the Kconfig entries and update descriptions for accuracy. Select the driver by default for configurations of interest. For the curious: 32BIT means only 32-bit DECstations support the device, not that the driver is not 64-bit clean; I have not checked that either though. Signed-off-by: Maciej W. Rozycki <macro@xxxxxxxxxxxxxx> --- Please apply, Maciej patch-mips-2.6.18-20060920-dz-kconfig-2 diff -up --recursive --new-file linux-mips-2.6.18-20060920.macro/drivers/serial/Kconfig linux-mips-2.6.18-20060920/drivers/serial/Kconfig --- linux-mips-2.6.18-20060920.macro/drivers/serial/Kconfig 2006-06-29 05:03:07.000000000 +0000 +++ linux-mips-2.6.18-20060920/drivers/serial/Kconfig 2007-02-04 20:18:36.000000000 +0000 @@ -385,20 +385,24 @@ config SERIAL_DZ bool "DECstation DZ serial driver" depends on MACH_DECSTATION && 32BIT select SERIAL_CORE - help - DZ11-family serial controllers for VAXstations, including the - DC7085, M7814, and M7819. + default y + ---help--- + DZ11-family serial controllers for DECstations and VAXstations, + including the DC7085, M7814, and M7819. config SERIAL_DZ_CONSOLE bool "Support console on DECstation DZ serial driver" depends on SERIAL_DZ=y select SERIAL_CORE_CONSOLE - help + default y + ---help--- If you say Y here, it will be possible to use a serial port as the system console (the system console is the device which receives all kernel messages and warnings and which allows logins in single user - mode). Note that the firmware uses ttyS0 as the serial console on - the Maxine and ttyS2 on the others. + mode). + + Note that the firmware uses ttyS3 as the serial console on + DECstations that use this driver. If unsure, say Y.
