Remove the old-fashioned lk201 driver under drivers/tc/ that used to be
used by the old dz.c and zs.c drivers, which is now orphan code referred
to from nowhere and does not build anymore. A modern replacement is
available as drivers/input/keyboard/lkkbd.c.
Signed-off-by: Maciej W. Rozycki <macro@xxxxxxxxxxxxxx>
---
There are no plans to do anything about this piece of code and it does
not fit anywhere anymore, so it is not just a matter of maintenance or the
lack of. There are still some bits that might be added to the new lkkbd.c
driver based on the old code, and the embedded hardware documentation
which is otherwise quite hard to get hold of might be useful to keep too.
Both of these can be done separately though. RIP.
Please apply,
Maciej
patch-mips-2.6.23-rc5-20070904-nolk201-2
diff -up --recursive --new-file linux-mips-2.6.23-rc5-20070904.macro/Documentation/dontdiff linux-mips-2.6.23-rc5-20070904/Documentation/dontdiff
--- linux-mips-2.6.23-rc5-20070904.macro/Documentation/dontdiff 2007-09-04 04:55:16.000000000 +0000
+++ linux-mips-2.6.23-rc5-20070904/Documentation/dontdiff 2007-09-17 14:29:42.000000000 +0000
@@ -121,7 +121,6 @@ kxgettext
lkc_defs.h
lex.c*
lex.*.c
-lk201-map.c
logo_*.c
logo_*_clut224.c
logo_*_mono.c
diff -up --recursive --new-file linux-mips-2.6.23-rc5-20070904.macro/arch/mips/Makefile linux-mips-2.6.23-rc5-20070904/arch/mips/Makefile
--- linux-mips-2.6.23-rc5-20070904.macro/arch/mips/Makefile 2007-09-04 04:55:19.000000000 +0000
+++ linux-mips-2.6.23-rc5-20070904/arch/mips/Makefile 2007-09-17 14:33:06.000000000 +0000
@@ -283,7 +283,6 @@ core-$(CONFIG_MACH_DECSTATION) += arch/m
cflags-$(CONFIG_MACH_DECSTATION)+= -Iinclude/asm-mips/mach-dec
libs-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/prom/
load-$(CONFIG_MACH_DECSTATION) += 0xffffffff80040000
-CLEAN_FILES += drivers/tc/lk201-map.c
#
# Wind River PPMC Board (4KC + GT64120)
diff -up --recursive --new-file linux-mips-2.6.23-rc5-20070904.macro/drivers/tc/.gitignore linux-mips-2.6.23-rc5-20070904/drivers/tc/.gitignore
--- linux-mips-2.6.23-rc5-20070904.macro/drivers/tc/.gitignore 2005-11-04 17:03:20.000000000 +0000
+++ linux-mips-2.6.23-rc5-20070904/drivers/tc/.gitignore 1970-01-01 00:00:00.000000000 +0000
@@ -1 +0,0 @@
-lk201-map.c
diff -up --recursive --new-file linux-mips-2.6.23-rc5-20070904.macro/drivers/tc/Makefile linux-mips-2.6.23-rc5-20070904/drivers/tc/Makefile
--- linux-mips-2.6.23-rc5-20070904.macro/drivers/tc/Makefile 2007-09-04 04:55:45.000000000 +0000
+++ linux-mips-2.6.23-rc5-20070904/drivers/tc/Makefile 2007-09-17 14:23:13.000000000 +0000
@@ -5,18 +5,3 @@
# Object file lists.
obj-$(CONFIG_TC) += tc.o tc-driver.o
-obj-$(CONFIG_VT) += lk201.o lk201-map.o lk201-remap.o
-
-$(obj)/lk201-map.o: $(obj)/lk201-map.c
-
-# Uncomment if you're changing the keymap and have an appropriate
-# loadkeys version for the map. By default, we'll use the shipped
-# versions.
-# GENERATE_KEYMAP := 1
-
-ifdef GENERATE_KEYMAP
-
-$(obj)/lk201-map.c: $(obj)/%.c: $(src)/%.map
- loadkeys --mktable $< > $@
-
-endif
diff -up --recursive --new-file linux-mips-2.6.23-rc5-20070904.macro/drivers/tc/lk201-map.c_shipped linux-mips-2.6.23-rc5-20070904/drivers/tc/lk201-map.c_shipped
--- linux-mips-2.6.23-rc5-20070904.macro/drivers/tc/lk201-map.c_shipped 2002-10-29 12:13:34.000000000 +0000
+++ linux-mips-2.6.23-rc5-20070904/drivers/tc/lk201-map.c_shipped 1970-01-01 00:00:00.000000000 +0000
@@ -1,265 +0,0 @@
-
-/* Do not edit this file! It was automatically generated by */
-/* loadkeys --mktable defkeymap.map > defkeymap.c */
-
-#include <linux/types.h>
-#include <linux/keyboard.h>
-#include <linux/kd.h>
-
-u_short plain_map[NR_KEYS] = {
- 0xf200, 0xf100, 0xf101, 0xf102, 0xf103, 0xf104, 0xf105, 0xf106,
- 0xf107, 0xf108, 0xf109, 0xf10a, 0xf10b, 0xf10c, 0xf10d, 0xf11b,
- 0xf11c, 0xf110, 0xf111, 0xf112, 0xf113, 0xf060, 0xf031, 0xf032,
- 0xf033, 0xf034, 0xf035, 0xf036, 0xf037, 0xf038, 0xf039, 0xf030,
- 0xf02d, 0xf03d, 0xf07f, 0xf114, 0xf115, 0xf116, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf009, 0xfb71, 0xfb77, 0xfb65, 0xfb72, 0xfb74,
- 0xfb79, 0xfb75, 0xfb69, 0xfb6f, 0xfb70, 0xf05b, 0xf05d, 0xf201,
- 0xf117, 0xf118, 0xf119, 0xf307, 0xf308, 0xf309, 0xf30b, 0xf702,
- 0xf207, 0xfb61, 0xfb73, 0xfb64, 0xfb66, 0xfb67, 0xfb68, 0xfb6a,
- 0xfb6b, 0xfb6c, 0xf03b, 0xf027, 0xf05c, 0xf603, 0xf304, 0xf305,
- 0xf306, 0xf200, 0xf700, 0xf03e, 0xfb7a, 0xfb78, 0xfb63, 0xfb76,
- 0xfb62, 0xfb6e, 0xfb6d, 0xf02c, 0xf02e, 0xf02f, 0xf200, 0xf601,
- 0xf600, 0xf602, 0xf301, 0xf302, 0xf303, 0xf30e, 0xf200, 0xf703,
- 0xf020, 0xf200, 0xf200, 0xf300, 0xf310, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-static u_short shift_map[NR_KEYS] = {
- 0xf200, 0xf100, 0xf101, 0xf102, 0xf103, 0xf104, 0xf105, 0xf106,
- 0xf107, 0xf108, 0xf109, 0xf10a, 0xf10b, 0xf10c, 0xf10d, 0xf203,
- 0xf11c, 0xf110, 0xf111, 0xf112, 0xf113, 0xf07e, 0xf021, 0xf040,
- 0xf023, 0xf024, 0xf025, 0xf05e, 0xf026, 0xf02a, 0xf028, 0xf029,
- 0xf05f, 0xf02b, 0xf07f, 0xf114, 0xf115, 0xf116, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf009, 0xfb51, 0xfb57, 0xfb45, 0xfb52, 0xfb54,
- 0xfb59, 0xfb55, 0xfb49, 0xfb4f, 0xfb50, 0xf07b, 0xf07d, 0xf201,
- 0xf117, 0xf20b, 0xf20a, 0xf307, 0xf308, 0xf309, 0xf30b, 0xf702,
- 0xf207, 0xfb41, 0xfb53, 0xfb44, 0xfb46, 0xfb47, 0xfb48, 0xfb4a,
- 0xfb4b, 0xfb4c, 0xf03a, 0xf022, 0xf07c, 0xf603, 0xf304, 0xf305,
- 0xf306, 0xf200, 0xf700, 0xf03c, 0xfb5a, 0xfb58, 0xfb43, 0xfb56,
- 0xfb42, 0xfb4e, 0xfb4d, 0xf03c, 0xf03e, 0xf03f, 0xf200, 0xf601,
- 0xf600, 0xf602, 0xf301, 0xf302, 0xf303, 0xf30e, 0xf200, 0xf703,
- 0xf020, 0xf200, 0xf200, 0xf300, 0xf310, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-static u_short altgr_map[NR_KEYS] = {
- 0xf200, 0xf100, 0xf101, 0xf102, 0xf103, 0xf104, 0xf105, 0xf106,
- 0xf107, 0xf108, 0xf109, 0xf10a, 0xf10b, 0xf10c, 0xf10d, 0xf202,
- 0xf11c, 0xf110, 0xf111, 0xf112, 0xf113, 0xf200, 0xf200, 0xf040,
- 0xf200, 0xf024, 0xf200, 0xf200, 0xf07b, 0xf05b, 0xf05d, 0xf07d,
- 0xf05c, 0xf200, 0xf200, 0xf114, 0xf115, 0xf116, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xfb71, 0xfb77, 0xf918, 0xfb72, 0xfb74,
- 0xfb79, 0xfb75, 0xfb69, 0xfb6f, 0xfb70, 0xf200, 0xf07e, 0xf201,
- 0xf117, 0xf118, 0xf119, 0xf911, 0xf912, 0xf913, 0xf30b, 0xf702,
- 0xf207, 0xf914, 0xfb73, 0xf917, 0xf919, 0xfb67, 0xfb68, 0xfb6a,
- 0xfb6b, 0xfb6c, 0xf200, 0xf200, 0xf200, 0xf603, 0xf90e, 0xf90f,
- 0xf910, 0xf200, 0xf700, 0xf200, 0xfb7a, 0xfb78, 0xf916, 0xfb76,
- 0xf915, 0xfb6e, 0xfb6d, 0xf200, 0xf200, 0xf200, 0xf200, 0xf601,
- 0xf600, 0xf602, 0xf90b, 0xf90c, 0xf90d, 0xf30e, 0xf200, 0xf703,
- 0xf200, 0xf200, 0xf200, 0xf90a, 0xf310, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-static u_short ctrl_map[NR_KEYS] = {
- 0xf200, 0xf100, 0xf101, 0xf102, 0xf103, 0xf104, 0xf105, 0xf106,
- 0xf107, 0xf108, 0xf109, 0xf10a, 0xf10b, 0xf10c, 0xf10d, 0xf204,
- 0xf11c, 0xf110, 0xf111, 0xf112, 0xf113, 0xf81b, 0xf200, 0xf000,
- 0xf01b, 0xf01c, 0xf01d, 0xf01e, 0xf01f, 0xf07f, 0xf200, 0xf200,
- 0xf01f, 0xf200, 0xf008, 0xf114, 0xf115, 0xf116, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf011, 0xf017, 0xf005, 0xf012, 0xf014,
- 0xf019, 0xf015, 0xf009, 0xf00f, 0xf010, 0xf01b, 0xf01d, 0xf201,
- 0xf117, 0xf118, 0xf119, 0xf307, 0xf308, 0xf309, 0xf30b, 0xf702,
- 0xf207, 0xf001, 0xf013, 0xf004, 0xf006, 0xf007, 0xf008, 0xf00a,
- 0xf00b, 0xf00c, 0xf200, 0xf007, 0xf01c, 0xf603, 0xf304, 0xf305,
- 0xf306, 0xf200, 0xf700, 0xf200, 0xf01a, 0xf018, 0xf003, 0xf016,
- 0xf002, 0xf00e, 0xf00d, 0xf200, 0xf20e, 0xf07f, 0xf200, 0xf601,
- 0xf600, 0xf602, 0xf301, 0xf302, 0xf303, 0xf30e, 0xf200, 0xf703,
- 0xf000, 0xf200, 0xf200, 0xf300, 0xf310, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-static u_short shift_ctrl_map[NR_KEYS] = {
- 0xf200, 0xf100, 0xf101, 0xf102, 0xf103, 0xf104, 0xf105, 0xf106,
- 0xf107, 0xf108, 0xf109, 0xf10a, 0xf10b, 0xf10c, 0xf10d, 0xf200,
- 0xf11c, 0xf110, 0xf111, 0xf112, 0xf113, 0xf200, 0xf200, 0xf000,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf01f, 0xf200, 0xf200, 0xf114, 0xf115, 0xf116, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf011, 0xf017, 0xf005, 0xf012, 0xf014,
- 0xf019, 0xf015, 0xf009, 0xf00f, 0xf010, 0xf200, 0xf200, 0xf201,
- 0xf117, 0xf118, 0xf119, 0xf307, 0xf308, 0xf309, 0xf30b, 0xf702,
- 0xf207, 0xf001, 0xf013, 0xf004, 0xf006, 0xf007, 0xf008, 0xf00a,
- 0xf00b, 0xf00c, 0xf200, 0xf200, 0xf200, 0xf603, 0xf304, 0xf305,
- 0xf306, 0xf200, 0xf700, 0xf200, 0xf01a, 0xf018, 0xf003, 0xf016,
- 0xf002, 0xf00e, 0xf00d, 0xf200, 0xf200, 0xf200, 0xf200, 0xf601,
- 0xf600, 0xf602, 0xf301, 0xf302, 0xf303, 0xf30e, 0xf200, 0xf703,
- 0xf200, 0xf200, 0xf200, 0xf300, 0xf310, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-static u_short alt_map[NR_KEYS] = {
- 0xf200, 0xf500, 0xf501, 0xf502, 0xf503, 0xf504, 0xf505, 0xf506,
- 0xf507, 0xf508, 0xf509, 0xf50a, 0xf50b, 0xf50c, 0xf50d, 0xf200,
- 0xf11c, 0xf510, 0xf511, 0xf512, 0xf513, 0xf01b, 0xf831, 0xf832,
- 0xf833, 0xf834, 0xf835, 0xf836, 0xf837, 0xf838, 0xf839, 0xf830,
- 0xf82d, 0xf83d, 0xf87f, 0xf114, 0xf115, 0xf116, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf809, 0xf871, 0xf877, 0xf865, 0xf872, 0xf874,
- 0xf879, 0xf875, 0xf869, 0xf86f, 0xf870, 0xf85b, 0xf85d, 0xf80d,
- 0xf117, 0xf118, 0xf119, 0xf907, 0xf908, 0xf909, 0xf30b, 0xf702,
- 0xf207, 0xf861, 0xf873, 0xf864, 0xf866, 0xf867, 0xf868, 0xf86a,
- 0xf86b, 0xf86c, 0xf83b, 0xf827, 0xf85c, 0xf603, 0xf904, 0xf905,
- 0xf906, 0xf200, 0xf700, 0xf200, 0xf87a, 0xf878, 0xf863, 0xf876,
- 0xf862, 0xf86e, 0xf86d, 0xf82c, 0xf82e, 0xf82f, 0xf200, 0xf210,
- 0xf600, 0xf211, 0xf901, 0xf902, 0xf903, 0xf30e, 0xf200, 0xf703,
- 0xf820, 0xf200, 0xf200, 0xf900, 0xf310, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-static u_short ctrl_alt_map[NR_KEYS] = {
- 0xf200, 0xf500, 0xf501, 0xf502, 0xf503, 0xf504, 0xf505, 0xf506,
- 0xf507, 0xf508, 0xf509, 0xf50a, 0xf50b, 0xf50c, 0xf50d, 0xf200,
- 0xf11c, 0xf510, 0xf511, 0xf512, 0xf513, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf114, 0xf115, 0xf20c, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf811, 0xf817, 0xf805, 0xf812, 0xf814,
- 0xf819, 0xf815, 0xf809, 0xf80f, 0xf810, 0xf200, 0xf200, 0xf201,
- 0xf117, 0xf118, 0xf119, 0xf307, 0xf308, 0xf309, 0xf30b, 0xf702,
- 0xf207, 0xf801, 0xf813, 0xf804, 0xf806, 0xf807, 0xf808, 0xf80a,
- 0xf80b, 0xf80c, 0xf200, 0xf200, 0xf200, 0xf603, 0xf304, 0xf305,
- 0xf306, 0xf200, 0xf700, 0xf200, 0xf81a, 0xf818, 0xf803, 0xf816,
- 0xf802, 0xf80e, 0xf80d, 0xf200, 0xf200, 0xf200, 0xf200, 0xf601,
- 0xf600, 0xf602, 0xf301, 0xf302, 0xf303, 0xf30e, 0xf200, 0xf703,
- 0xf200, 0xf200, 0xf200, 0xf300, 0xf20c, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
- 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
-};
-
-ushort *key_maps[MAX_NR_KEYMAPS] = {
- plain_map, shift_map, altgr_map, 0,
- ctrl_map, shift_ctrl_map, 0, 0,
- alt_map, 0, 0, 0,
- ctrl_alt_map, 0
-};
-
-unsigned int keymap_count = 7;
-
-
-/*
- * Philosophy: most people do not define more strings, but they who do
- * often want quite a lot of string space. So, we statically allocate
- * the default and allocate dynamically in chunks of 512 bytes.
- */
-
-char func_buf[] = {
- '\033', '[', '[', 'A', 0,
- '\033', '[', '[', 'B', 0,
- '\033', '[', '[', 'C', 0,
- '\033', '[', '[', 'D', 0,
- '\033', '[', '[', 'E', 0,
- '\033', '[', '1', '7', '~', 0,
- '\033', '[', '1', '8', '~', 0,
- '\033', '[', '1', '9', '~', 0,
- '\033', '[', '2', '0', '~', 0,
- '\033', '[', '2', '1', '~', 0,
- '\033', '[', '2', '3', '~', 0,
- '\033', '[', '2', '4', '~', 0,
- '\033', '[', '2', '5', '~', 0,
- '\033', '[', '2', '6', '~', 0,
- '\033', '[', '2', '8', '~', 0,
- '\033', '[', '2', '9', '~', 0,
- '\033', '[', '3', '1', '~', 0,
- '\033', '[', '3', '2', '~', 0,
- '\033', '[', '3', '3', '~', 0,
- '\033', '[', '3', '4', '~', 0,
- '\033', '[', '1', '~', 0,
- '\033', '[', '2', '~', 0,
- '\033', '[', '3', '~', 0,
- '\033', '[', '4', '~', 0,
- '\033', '[', '5', '~', 0,
- '\033', '[', '6', '~', 0,
- '\033', '[', 'M', 0,
- '\033', '[', 'P', 0,
-};
-
-
-char *funcbufptr = func_buf;
-int funcbufsize = sizeof(func_buf);
-int funcbufleft = 0; /* space left */
-
-char *func_table[MAX_NR_FUNC] = {
- func_buf + 0,
- func_buf + 5,
- func_buf + 10,
- func_buf + 15,
- func_buf + 20,
- func_buf + 25,
- func_buf + 31,
- func_buf + 37,
- func_buf + 43,
- func_buf + 49,
- func_buf + 55,
- func_buf + 61,
- func_buf + 67,
- func_buf + 73,
- func_buf + 79,
- func_buf + 85,
- func_buf + 91,
- func_buf + 97,
- func_buf + 103,
- func_buf + 109,
- func_buf + 115,
- func_buf + 120,
- func_buf + 125,
- func_buf + 130,
- func_buf + 135,
- func_buf + 140,
- func_buf + 145,
- 0,
- 0,
- func_buf + 149,
- 0,
-};
-
-struct kbdiacr accent_table[MAX_DIACR] = {
- {'`', 'A', 'À'}, {'`', 'a', 'à'},
- {'\'', 'A', 'Á'}, {'\'', 'a', 'á'},
- {'^', 'A', 'Â'}, {'^', 'a', 'â'},
- {'~', 'A', 'Ã'}, {'~', 'a', 'ã'},
- {'"', 'A', 'Ä'}, {'"', 'a', 'ä'},
- {'O', 'A', 'Å'}, {'o', 'a', 'å'},
- {'0', 'A', 'Å'}, {'0', 'a', 'å'},
- {'A', 'A', 'Å'}, {'a', 'a', 'å'},
- {'A', 'E', 'Æ'}, {'a', 'e', 'æ'},
- {',', 'C', 'Ç'}, {',', 'c', 'ç'},
- {'`', 'E', 'È'}, {'`', 'e', 'è'},
- {'\'', 'E', 'É'}, {'\'', 'e', 'é'},
- {'^', 'E', 'Ê'}, {'^', 'e', 'ê'},
- {'"', 'E', 'Ë'}, {'"', 'e', 'ë'},
- {'`', 'I', 'Ì'}, {'`', 'i', 'ì'},
- {'\'', 'I', 'Í'}, {'\'', 'i', 'í'},
- {'^', 'I', 'Î'}, {'^', 'i', 'î'},
- {'"', 'I', 'Ï'}, {'"', 'i', 'ï'},
- {'-', 'D', 'Ð'}, {'-', 'd', 'ð'},
- {'~', 'N', 'Ñ'}, {'~', 'n', 'ñ'},
- {'`', 'O', 'Ò'}, {'`', 'o', 'ò'},
- {'\'', 'O', 'Ó'}, {'\'', 'o', 'ó'},
- {'^', 'O', 'Ô'}, {'^', 'o', 'ô'},
- {'~', 'O', 'Õ'}, {'~', 'o', 'õ'},
- {'"', 'O', 'Ö'}, {'"', 'o', 'ö'},
- {'/', 'O', 'Ø'}, {'/', 'o', 'ø'},
- {'`', 'U', 'Ù'}, {'`', 'u', 'ù'},
- {'\'', 'U', 'Ú'}, {'\'', 'u', 'ú'},
- {'^', 'U', 'Û'}, {'^', 'u', 'û'},
- {'"', 'U', 'Ü'}, {'"', 'u', 'ü'},
- {'\'', 'Y', 'Ý'}, {'\'', 'y', 'ý'},
- {'T', 'H', 'Þ'}, {'t', 'h', 'þ'},
- {'s', 's', 'ß'}, {'"', 'y', 'ÿ'},
- {'s', 'z', 'ß'}, {'i', 'j', 'ÿ'},
-};
-
-unsigned int accent_table_size = 68;
diff -up --recursive --new-file linux-mips-2.6.23-rc5-20070904.macro/drivers/tc/lk201-map.map linux-mips-2.6.23-rc5-20070904/drivers/tc/lk201-map.map
--- linux-mips-2.6.23-rc5-20070904.macro/drivers/tc/lk201-map.map 2003-11-11 04:56:58.000000000 +0000
+++ linux-mips-2.6.23-rc5-20070904/drivers/tc/lk201-map.map 1970-01-01 00:00:00.000000000 +0000
@@ -1,356 +0,0 @@
-# Default kernel keymap. This uses 7 modifier combinations.
-keymaps 0-2,4-5,8,12
-# Change the above line into
-# keymaps 0-2,4-6,8,12
-# in case you want the entries
-# altgr control keycode 83 = Boot
-# altgr control keycode 111 = Boot
-# below.
-#
-# In fact AltGr is used very little, and one more keymap can
-# be saved by mapping AltGr to Alt (and adapting a few entries):
-# keycode 100 = Alt
-#
-keycode 0x15 = grave tilde
- alt keycode 0x15 = Escape
- control keycode 0x15 = Meta_Escape
-keycode 0x16 = one exclam
- alt keycode 0x16 = Meta_one
-keycode 0x17 = two at at
- control keycode 0x17 = nul
- shift control keycode 0x17 = nul
- alt keycode 0x17 = Meta_two
-keycode 0x18 = three numbersign
- control keycode 0x18 = Escape
- alt keycode 0x18 = Meta_three
-keycode 0x19 = four dollar dollar
- control keycode 0x19 = Control_backslash
- alt keycode 0x19 = Meta_four
-keycode 0x1a = five percent
- control keycode 0x1a = Control_bracketright
- alt keycode 0x1a = Meta_five
-keycode 0x1b = six asciicircum
- control keycode 0x1b = Control_asciicircum
- alt keycode 0x1b = Meta_six
-keycode 0x1c = seven ampersand braceleft
- control keycode 0x1c = Control_underscore
- alt keycode 0x1c = Meta_seven
-keycode 0x1d = eight asterisk bracketleft
- control keycode 0x1d = Delete
- alt keycode 0x1d = Meta_eight
-keycode 0x1e = nine parenleft bracketright
- alt keycode 0x1e = Meta_nine
-keycode 0x1f = zero parenright braceright
- alt keycode 0x1f = Meta_zero
-keycode 0x20 = minus underscore backslash
- control keycode 0x20 = Control_underscore
- shift control keycode 0x20 = Control_underscore
- alt keycode 0x20 = Meta_minus
-keycode 0x21 = equal plus
- alt keycode 0x21 = Meta_equal
-keycode 0x22 = Delete Delete
- control keycode 0x22 = BackSpace
- alt keycode 0x22 = Meta_Delete
-keycode 0x2a = Tab Tab
- alt keycode 0x2a = Meta_Tab
-keycode 0x2b = q
-keycode 0x2c = w
-keycode 0x2d = e
- altgr keycode 0x2d = Hex_E
-keycode 0x2e = r
-keycode 0x2f = t
-keycode 0x30 = y
-keycode 0x31 = u
-keycode 0x32 = i
-keycode 0x33 = o
-keycode 0x34 = p
-keycode 0x35 = bracketleft braceleft
- control keycode 0x35 = Escape
- alt keycode 0x35 = Meta_bracketleft
-keycode 0x36 = bracketright braceright asciitilde
- control keycode 0x36 = Control_bracketright
- alt keycode 0x36 = Meta_bracketright
-keycode 0x37 = Return
- alt keycode 0x37 = Meta_Control_m
-keycode 0x3f = Control
-keycode 0x41 = a
- altgr keycode 0x41 = Hex_A
-keycode 0x42 = s
-keycode 0x43 = d
- altgr keycode 0x43 = Hex_D
-keycode 0x44 = f
- altgr keycode 0x44 = Hex_F
-keycode 0x45 = g
-keycode 0x46 = h
-keycode 0x47 = j
-keycode 0x48 = k
-keycode 0x49 = l
-keycode 0x4a = semicolon colon
- alt keycode 0x4a = Meta_semicolon
-keycode 0x4b = apostrophe quotedbl
- control keycode 0x4b = Control_g
- alt keycode 0x4b = Meta_apostrophe
-# keycode 41 = grave asciitilde
-# control keycode 41 = nul
-# alt keycode 41 = Meta_grave
-keycode 0x52 = Shift
-keycode 0x4c = backslash bar
- control keycode 0x4c = Control_backslash
- alt keycode 0x4c = Meta_backslash
-keycode 0x53 = greater less
-keycode 0x54 = z
-keycode 0x55 = x
-keycode 0x56 = c
- altgr keycode 0x56 = Hex_C
-keycode 0x57 = v
-keycode 0x58 = b
- altgr keycode 0x58 = Hex_B
-keycode 0x59 = n
-keycode 0x5a = m
-keycode 0x5b = comma less
- alt keycode 0x5b = Meta_comma
-keycode 0x5c = period greater
- control keycode 0x5c = Compose
- alt keycode 0x5c = Meta_period
-keycode 0x5d = slash question
- control keycode 0x5d = Delete
- alt keycode 0x5d = Meta_slash
-
-keycode 0x67 = Alt
-keycode 0x68 = space space
- control keycode 0x68 = nul
- alt keycode 0x68 = Meta_space
-keycode 0x40 = Caps_Lock
-keycode 0x01 = F1
- control keycode 0x01 = F1
- alt keycode 0x01 = Console_1
- control alt keycode 0x01 = Console_1
-keycode 0x02 = F2
- control keycode 0x02 = F2
- alt keycode 0x02 = Console_2
- control alt keycode 0x02 = Console_2
-keycode 0x03 = F3
- control keycode 0x03 = F3
- alt keycode 0x03 = Console_3
- control alt keycode 0x03 = Console_3
-keycode 0x04 = F4
- control keycode 0x04 = F4
- alt keycode 0x04 = Console_4
- control alt keycode 0x04 = Console_4
-keycode 0x05 = F5
- control keycode 0x05 = F5
- alt keycode 0x05 = Console_5
- control alt keycode 0x05 = Console_5
-keycode 0x06 = F6
- control keycode 0x06 = F6
- alt keycode 0x06 = Console_6
- control alt keycode 0x06 = Console_6
-keycode 0x07 = F7
- control keycode 0x07 = F7
- alt keycode 0x07 = Console_7
- control alt keycode 0x07 = Console_7
-keycode 0x08 = F8
- control keycode 0x08 = F8
- alt keycode 0x08 = Console_8
- control alt keycode 0x08 = Console_8
-keycode 0x09 = F9
- control keycode 0x09 = F9
- alt keycode 0x09 = Console_9
- control alt keycode 0x09 = Console_9
-keycode 0x0a = F10
- control keycode 0x0a = F10
- alt keycode 0x0a = Console_10
- control alt keycode 0x0a = Console_10
-keycode 0x0b = F11
- control keycode 0x0b = F11
- alt keycode 0x0b = Console_11
- control alt keycode 0x0b = Console_11
-keycode 0x0c = F12
- control keycode 0x0c = F12
- alt keycode 0x0c = Console_12
- control alt keycode 0x0c = Console_12
-keycode 0x0d = F13
- control keycode 0x0d = F13
- alt keycode 0x0d = Console_13
- control alt keycode 0x0d = Console_13
-keycode 0x0e = F14
- control keycode 0x0e = F14
- alt keycode 0x0e = Console_14
- control alt keycode 0x0e = Console_14
-
-keycode 0x11 = F17
- control keycode 0x11 = F17
- alt keycode 0x11 = Console_17
- control alt keycode 0x11 = Console_17
-keycode 0x12 = F18
- control keycode 0x12 = F18
- alt keycode 0x12 = Console_18
- control alt keycode 0x12 = Console_18
-keycode 0x13 = F19
- control keycode 0x13 = F19
- alt keycode 0x13 = Console_19
- control alt keycode 0x13 = Console_19
-keycode 0x14 = F20
- control keycode 0x14 = F20
- alt keycode 0x14 = Console_20
- control alt keycode 0x14 = Console_20
-
-
-keycode 0x3b = KP_7
- alt keycode 0x3b = Ascii_7
- altgr keycode 0x3b = Hex_7
-keycode 0x3c = KP_8
- alt keycode 0x3c = Ascii_8
- altgr keycode 0x3c = Hex_8
-keycode 0x3d = KP_9
- alt keycode 0x3d = Ascii_9
- altgr keycode 0x3d = Hex_9
-keycode 0x3e = KP_Subtract
-keycode 0x4e = KP_4
- alt keycode 0x4e = Ascii_4
- altgr keycode 0x4e = Hex_4
-keycode 0x4f = KP_5
- alt keycode 0x4f = Ascii_5
- altgr keycode 0x4f = Hex_5
-keycode 0x50 = KP_6
- alt keycode 0x50 = Ascii_6
- altgr keycode 0x50 = Hex_6
-keycode 0x62 = KP_1
- alt keycode 0x62 = Ascii_1
- altgr keycode 0x62 = Hex_1
-keycode 0x63 = KP_2
- alt keycode 0x63 = Ascii_2
- altgr keycode 0x63 = Hex_2
-keycode 0x64 = KP_3
- alt keycode 0x64 = Ascii_3
- altgr keycode 0x64 = Hex_3
-keycode 0x6b = KP_0
- alt keycode 0x6b = Ascii_0
- altgr keycode 0x6b = Hex_0
-keycode 0x6c = KP_Period
-# altgr control keycode 0x6c = Boot
- control alt keycode 0x6c = Boot
-keycode 0x65 = KP_Enter
-
-keycode 0x3f = Control
-
-# keycode 100 = AltGr
-
-keycode 0x23 = Find
-keycode 0x4d = Up
-keycode 0x39 = Prior
- shift keycode 0x39 = Scroll_Backward
-keycode 0x5f = Left
- alt keycode 0x5f = Decr_Console
-keycode 0x61 = Right
- alt keycode 0x61 = Incr_Console
-keycode 0x38 = Select
-keycode 0x60 = Down
-keycode 0x3a = Next
- shift keycode 0x3a = Scroll_Forward
-keycode 0x24 = Insert
-keycode 0x25 = Remove
-# altgr control keycode 0x25 = Boot
- control alt keycode 0x25 = Boot
-
-keycode 0x0f = Help Show_Memory Show_Registers
- control keycode 0x0f = Show_State
-
-keycode 0x10 = Do
-
-string F1 = "\033[[A"
-string F2 = "\033[[B"
-string F3 = "\033[[C"
-string F4 = "\033[[D"
-string F5 = "\033[[E"
-string F6 = "\033[17~"
-string F7 = "\033[18~"
-string F8 = "\033[19~"
-string F9 = "\033[20~"
-string F10 = "\033[21~"
-string F11 = "\033[23~"
-string F12 = "\033[24~"
-string F13 = "\033[25~"
-string F14 = "\033[26~"
-string F15 = "\033[28~"
-string F16 = "\033[29~"
-string F17 = "\033[31~"
-string F18 = "\033[32~"
-string F19 = "\033[33~"
-string F20 = "\033[34~"
-string Find = "\033[1~"
-string Insert = "\033[2~"
-string Remove = "\033[3~"
-string Select = "\033[4~"
-string Prior = "\033[5~"
-string Next = "\033[6~"
-string Macro = "\033[M"
-string Pause = "\033[P"
-compose '`' 'A' to 'À'
-compose '`' 'a' to 'à'
-compose '\'' 'A' to 'Á'
-compose '\'' 'a' to 'á'
-compose '^' 'A' to 'Â'
-compose '^' 'a' to 'â'
-compose '~' 'A' to 'Ã'
-compose '~' 'a' to 'ã'
-compose '"' 'A' to 'Ä'
-compose '"' 'a' to 'ä'
-compose 'O' 'A' to 'Å'
-compose 'o' 'a' to 'å'
-compose '0' 'A' to 'Å'
-compose '0' 'a' to 'å'
-compose 'A' 'A' to 'Å'
-compose 'a' 'a' to 'å'
-compose 'A' 'E' to 'Æ'
-compose 'a' 'e' to 'æ'
-compose ',' 'C' to 'Ç'
-compose ',' 'c' to 'ç'
-compose '`' 'E' to 'È'
-compose '`' 'e' to 'è'
-compose '\'' 'E' to 'É'
-compose '\'' 'e' to 'é'
-compose '^' 'E' to 'Ê'
-compose '^' 'e' to 'ê'
-compose '"' 'E' to 'Ë'
-compose '"' 'e' to 'ë'
-compose '`' 'I' to 'Ì'
-compose '`' 'i' to 'ì'
-compose '\'' 'I' to 'Í'
-compose '\'' 'i' to 'í'
-compose '^' 'I' to 'Î'
-compose '^' 'i' to 'î'
-compose '"' 'I' to 'Ï'
-compose '"' 'i' to 'ï'
-compose '-' 'D' to 'Ð'
-compose '-' 'd' to 'ð'
-compose '~' 'N' to 'Ñ'
-compose '~' 'n' to 'ñ'
-compose '`' 'O' to 'Ò'
-compose '`' 'o' to 'ò'
-compose '\'' 'O' to 'Ó'
-compose '\'' 'o' to 'ó'
-compose '^' 'O' to 'Ô'
-compose '^' 'o' to 'ô'
-compose '~' 'O' to 'Õ'
-compose '~' 'o' to 'õ'
-compose '"' 'O' to 'Ö'
-compose '"' 'o' to 'ö'
-compose '/' 'O' to 'Ø'
-compose '/' 'o' to 'ø'
-compose '`' 'U' to 'Ù'
-compose '`' 'u' to 'ù'
-compose '\'' 'U' to 'Ú'
-compose '\'' 'u' to 'ú'
-compose '^' 'U' to 'Û'
-compose '^' 'u' to 'û'
-compose '"' 'U' to 'Ü'
-compose '"' 'u' to 'ü'
-compose '\'' 'Y' to 'Ý'
-compose '\'' 'y' to 'ý'
-compose 'T' 'H' to 'Þ'
-compose 't' 'h' to 'þ'
-compose 's' 's' to 'ß'
-compose '"' 'y' to 'ÿ'
-compose 's' 'z' to 'ß'
-compose 'i' 'j' to 'ÿ'
diff -up --recursive --new-file linux-mips-2.6.23-rc5-20070904.macro/drivers/tc/lk201-remap.c linux-mips-2.6.23-rc5-20070904/drivers/tc/lk201-remap.c
--- linux-mips-2.6.23-rc5-20070904.macro/drivers/tc/lk201-remap.c 2003-11-11 04:56:58.000000000 +0000
+++ linux-mips-2.6.23-rc5-20070904/drivers/tc/lk201-remap.c 1970-01-01 00:00:00.000000000 +0000
@@ -1,172 +0,0 @@
-/*
- * Keyboard mappings for DEC LK201/401/501 keyboards
- *
- * 17.05.99 Michael Engel (engel@xxxxxxxxxxx)
- *
- * DEC US keyboards generate keycodes in the range 0x55 - 0xfb
- *
- * This conflicts with Linux scancode conventions which define
- * 0x00-0x7f as "normal" and 0x80-0xff as "shifted" scancodes, so we
- * have to remap the keycodes to 0x00-0x7f with the scancodeRemap
- * array. The generated scancode is simply the number of the key counted
- * from the left upper to the right lower corner of the keyboard ...
- *
- * These scancodes are then being remapped (I hope ;-)) with the
- * lk501*map[] arrays which define scancode -> Linux code mapping
- *
- * Oh man is this horrible ;-)
- *
- * Scancodes with dual labels exist for keyboards as follows:
- *
- * code: left label / right label
- *
- * 0x73: LKx01, LK421 / LK443, LK444
- * 0x74: LKx01, LK421 / LK443, LK444
- * 0x7c: LKx01, LK421 / LK443, LK444
- * 0x8a: LKx01, LK421 / LK443, LK444
- * 0x8b: LKx01, LK421 / LK443, LK444
- * 0x8c: LKx01, LK421 / LK443, LK444
- * 0x8d: LKx01, LK421 / LK443, LK444
- * 0x8e: LKx01, LK421 / LK443, LK444
- * 0x8f: LKx01, LK421 / LK443, LK444
- * 0x9c: LKx01, LK421 / LK443, LK444
- * 0xa1: LKx01, LK421 / LK443, LK444
- * 0xa2: LKx01, LK421 / LK443, LK444
- * 0xa3: LKx01, LK421 / LK443, LK444
- * 0xa4: LKx01, LK421 / LK443, LK444
- * 0xad: LK421 / LK443, LK444
- * 0xc9: LKx01, LK421, LK443 / LK444
- * 0xf7: LKx01, LK443 / LK444
- */
-
-unsigned char scancodeRemap[256] = {
-/* ----- */
-/* 0 */ 0, 0, 0, 0,
-/* ----- */
-/* 4 */ 0, 0, 0, 0,
-/* ----- */
-/* 8 */ 0, 0, 0, 0,
-/* ----- */
-/* c */ 0, 0, 0, 0,
-/* ----- */
-/* 10 */ 0, 0, 0, 0,
-/* ----- */
-/* 14 */ 0, 0, 0, 0,
-/* ----- */
-/* 18 */ 0, 0, 0, 0,
-/* ----- */
-/* 1c */ 0, 0, 0, 0,
-/* ----- */
-/* 20 */ 0, 0, 0, 0,
-/* ----- */
-/* 24 */ 0, 0, 0, 0,
-/* ----- */
-/* 28 */ 0, 0, 0, 0,
-/* ----- */
-/* 2c */ 0, 0, 0, 0,
-/* ----- */
-/* 30 */ 0, 0, 0, 0,
-/* ----- */
-/* 34 */ 0, 0, 0, 0,
-/* ----- */
-/* 38 */ 0, 0, 0, 0,
-/* ----- */
-/* 3c */ 0, 0, 0, 0,
-/* ----- */
-/* 40 */ 0, 0, 0, 0,
-/* ----- */
-/* 44 */ 0, 0, 0, 0,
-/* ----- */
-/* 48 */ 0, 0, 0, 0,
-/* ----- */
-/* 4c */ 0, 0, 0, 0,
-/* ----- */
-/* 50 */ 0, 0, 0, 0,
-/* ----- ESC F1 F2 */
-/* 54 */ 0, 0, 0x01, 0x02,
-/* ----- F3 F4 F5 */
-/* 58 */ 0x03, 0x04, 0x05, 0,
-/* ----- */
-/* 5c */ 0, 0, 0, 0,
-/* ----- */
-/* 60 */ 0, 0, 0, 0,
-/* ----- F6 F7 F8 F9 */
-/* 64 */ 0x06, 0x07, 0x08, 0x09,
-/* ----- F10 */
-/* 68 */ 0x0a, 0, 0, 0,
-/* ----- */
-/* 6c */ 0, 0, 0, 0,
-/* ----- F11 F12 F13/PRNT SCRN */
-/* 70 */ 0, 0x0b, 0x0c, 0x0d,
-/* ----- F14/SCRL LCK */
-/* 74 */ 0x0e, 0, 0, 0,
-/* ----- */
-/* 78 */ 0, 0, 0, 0,
-/* ----- HELP/PAUSE DO */
-/* 7c */ 0x0f, 0x10, 0, 0,
-/* ----- F17 F18 F19 F20 */
-/* 80 */ 0x11, 0x12, 0x13, 0x14,
-/* ----- */
-/* 84 */ 0, 0, 0, 0,
-/* ----- FIND/INSERT INSERT/HOME */
-/* 88 */ 0, 0, 0x23, 0x24,
-/* ----- REMOVE/PG UP SELECT/DELETE PREVIOUS/END NEXT/PG DN */
-/* 8c */ 0x25, 0x38, 0x39, 0x3a,
-/* ----- KP 0 */
-/* 90 */ 0, 0, 0x6b, 0,
-/* ----- KP . KP ENTER KP 1 KP 2 */
-/* 94 */ 0x6c, 0x65, 0x62, 0x63,
-/* ----- KP 3 KP 4 KP 5 KP 6 */
-/* 98 */ 0x64, 0x4e, 0x4f, 0x50,
-/* ----- KP ,/KP + KP 7 KP 8 KP 9 */
-/* 9c */ 0x51, 0x3b, 0x3c, 0x3d,
-/* ----- KP - KP F1/NUM LCK KP F2/KP / KP F3/KP * */
-/* a0 */ 0x3e, 0x26, 0x27, 0x28,
-/* ----- KP F4/KP - LEFT */
-/* a4 */ 0x29, 0, 0, 0x5f,
-/* ----- RIGHT DOWN UP SHIFT Rt */
-/* a8 */ 0x61, 0x60, 0x4d, 0x5e,
-/* ----- ALT COMP Rt/CTRL Rt SHIFT CONTROL */
-/* ac */ 0, 0, 0x52, 0x3f,
-/* ----- CAPS COMPOSE ALT Rt */
-/* b0 */ 0x40, 0x67, 0, 0,
-/* ----- */
-/* b4 */ 0, 0, 0, 0,
-/* ----- */
-/* b8 */ 0, 0, 0, 0,
-/* ----- BKSP RET TAB ` */
-/* bc */ 0x22, 0x37, 0x2a, 0x15,
-/* ----- 1 q a z */
-/* c0 */ 0x16, 0x2b, 0x41, 0x54,
-/* ----- 2 w s */
-/* c4 */ 0, 0x17, 0x2c, 0x42,
-/* ----- x </\\ 3 */
-/* c8 */ 0x55, 0x53, 0, 0x18,
-/* ----- e d c */
-/* cc */ 0x2d, 0x43, 0x56, 0,
-/* ----- 4 r f v */
-/* d0 */ 0x19, 0x2e, 0x44, 0x57,
-/* ----- SPACE 5 t */
-/* d4 */ 0x68, 0, 0x1a, 0x2f,
-/* ----- g b 6 */
-/* d8 */ 0x45, 0x58, 0, 0x1b,
-/* ----- y h n */
-/* dc */ 0x30, 0x46, 0x59, 0,
-/* ----- 7 u j m */
-/* e0 */ 0x1c, 0x31, 0x47, 0x5a,
-/* ----- 8 i k */
-/* e4 */ 0, 0x1d, 0x32, 0x48,
-/* ----- , 9 o */
-/* e8 */ 0x5b, 0, 0x1e, 0x33,
-/* ----- l . 0 */
-/* ec */ 0x49, 0x5c, 0, 0x1f,
-/* ----- p ; / */
-/* f0 */ 0x34, 0, 0x4a, 0x5d,
-/* ----- = ] \\/\' */
-/* f4 */ 0, 0x21, 0x36, 0x4c,
-/* ----- - [ \' */
-/* f8 */ 0, 0x20, 0x35, 0x4b,
-/* ----- */
-/* fc */ 0, 0, 0, 0,
-};
-
diff -up --recursive --new-file linux-mips-2.6.23-rc5-20070904.macro/drivers/tc/lk201.c linux-mips-2.6.23-rc5-20070904/drivers/tc/lk201.c
--- linux-mips-2.6.23-rc5-20070904.macro/drivers/tc/lk201.c 2007-02-21 05:56:45.000000000 +0000
+++ linux-mips-2.6.23-rc5-20070904/drivers/tc/lk201.c 1970-01-01 00:00:00.000000000 +0000
@@ -1,439 +0,0 @@
-/*
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999-2002 Harald Koerfgen <hkoerfg@xxxxxx>
- * Copyright (C) 2001, 2002, 2003, 2004 Maciej W. Rozycki
- */
-
-
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kbd_ll.h>
-#include <linux/kbd_kern.h>
-#include <linux/vt_kern.h>
-
-#include <asm/keyboard.h>
-#include <asm/dec/tc.h>
-#include <asm/dec/machtype.h>
-#include <asm/dec/serial.h>
-
-#include "lk201.h"
-
-/*
- * Only handle DECstations that have an LK201 interface.
- * Maxine uses LK501 at the Access.Bus and various DECsystems
- * have no keyboard interface at all.
- */
-#define LK_IFACE (mips_machtype == MACH_DS23100 || \
- mips_machtype == MACH_DS5000_200 || \
- mips_machtype == MACH_DS5000_1XX || \
- mips_machtype == MACH_DS5000_2X0)
-/*
- * These use the Z8530 SCC. Others use the DZ11.
- */
-#define LK_IFACE_ZS (mips_machtype == MACH_DS5000_1XX || \
- mips_machtype == MACH_DS5000_2X0)
-
-/* Simple translation table for the SysRq keys */
-
-#ifdef CONFIG_MAGIC_SYSRQ
-/*
- * Actually no translation at all, at least until we figure out
- * how to define SysRq for LK201 and friends. --macro
- */
-unsigned char lk201_sysrq_xlate[128];
-unsigned char *kbd_sysrq_xlate = lk201_sysrq_xlate;
-
-unsigned char kbd_sysrq_key = -1;
-#endif
-
-#define KEYB_LINE 3
-
-static int __init lk201_init(void *);
-static void __init lk201_info(void *);
-static void lk201_rx_char(unsigned char, unsigned char);
-
-static struct dec_serial_hook lk201_hook = {
- .init_channel = lk201_init,
- .init_info = lk201_info,
- .rx_char = NULL,
- .poll_rx_char = NULL,
- .poll_tx_char = NULL,
- .cflags = B4800 | CS8 | CSTOPB | CLOCAL,
-};
-
-/*
- * This is used during keyboard initialisation
- */
-static unsigned char lk201_reset_string[] = {
- LK_CMD_SET_DEFAULTS,
- LK_CMD_MODE(LK_MODE_RPT_DOWN, 1),
- LK_CMD_MODE(LK_MODE_RPT_DOWN, 2),
- LK_CMD_MODE(LK_MODE_RPT_DOWN, 3),
- LK_CMD_MODE(LK_MODE_RPT_DOWN, 4),
- LK_CMD_MODE(LK_MODE_DOWN_UP, 5),
- LK_CMD_MODE(LK_MODE_DOWN_UP, 6),
- LK_CMD_MODE(LK_MODE_RPT_DOWN, 7),
- LK_CMD_MODE(LK_MODE_RPT_DOWN, 8),
- LK_CMD_MODE(LK_MODE_RPT_DOWN, 9),
- LK_CMD_MODE(LK_MODE_RPT_DOWN, 10),
- LK_CMD_MODE(LK_MODE_RPT_DOWN, 11),
- LK_CMD_MODE(LK_MODE_RPT_DOWN, 12),
- LK_CMD_MODE(LK_MODE_DOWN, 13),
- LK_CMD_MODE(LK_MODE_RPT_DOWN, 14),
- LK_CMD_DIS_KEYCLK,
- LK_CMD_ENB_BELL, LK_PARAM_VOLUME(4),
-};
-
-static void *lk201_handle;
-
-static int lk201_send(unsigned char ch)
-{
- if (lk201_hook.poll_tx_char(lk201_handle, ch)) {
- printk(KERN_ERR "lk201: transmit timeout\n");
- return -EIO;
- }
- return 0;
-}
-
-static inline int lk201_get_id(void)
-{
- return lk201_send(LK_CMD_REQ_ID);
-}
-
-static int lk201_reset(void)
-{
- int i, r;
-
- for (i = 0; i < sizeof(lk201_reset_string); i++) {
- r = lk201_send(lk201_reset_string[i]);
- if (r < 0)
- return r;
- }
- return 0;
-}
-
-static void lk201_report(unsigned char id[6])
-{
- char *report = "lk201: keyboard attached, ";
-
- switch (id[2]) {
- case LK_STAT_PWRUP_OK:
- printk(KERN_INFO "%sself-test OK\n", report);
- break;
- case LK_STAT_PWRUP_KDOWN:
- /* The keyboard will resend the power-up ID
- after all keys are released, so we don't
- bother handling the error specially. Still
- there may be a short-circuit inside.
- */
- printk(KERN_ERR "%skey down (stuck?), code: 0x%02x\n",
- report, id[3]);
- break;
- case LK_STAT_PWRUP_ERROR:
- printk(KERN_ERR "%sself-test failure\n", report);
- break;
- default:
- printk(KERN_ERR "%sunknown error: 0x%02x\n",
- report, id[2]);
- }
-}
-
-static void lk201_id(unsigned char id[6])
-{
- /*
- * Report whether there is an LK201 or an LK401
- * The LK401 has ALT keys...
- */
- switch (id[4]) {
- case 1:
- printk(KERN_INFO "lk201: LK201 detected\n");
- break;
- case 2:
- printk(KERN_INFO "lk201: LK401 detected\n");
- break;
- case 3:
- printk(KERN_INFO "lk201: LK443 detected\n");
- break;
- case 4:
- printk(KERN_INFO "lk201: LK421 detected\n");
- break;
- default:
- printk(KERN_WARNING
- "lk201: unknown keyboard detected, ID %d\n", id[4]);
- printk(KERN_WARNING "lk201: ... please report to "
- "<linux-mips@xxxxxxxxxxxxxx>\n");
- }
-}
-
-#define DEFAULT_KEYB_REP_DELAY (250/5) /* [5ms] */
-#define DEFAULT_KEYB_REP_RATE 30 /* [cps] */
-
-static struct kbd_repeat kbdrate = {
- DEFAULT_KEYB_REP_DELAY,
- DEFAULT_KEYB_REP_RATE
-};
-
-static void parse_kbd_rate(struct kbd_repeat *r)
-{
- if (r->delay <= 0)
- r->delay = kbdrate.delay;
- if (r->rate <= 0)
- r->rate = kbdrate.rate;
-
- if (r->delay < 5)
- r->delay = 5;
- if (r->delay > 630)
- r->delay = 630;
- if (r->rate < 12)
- r->rate = 12;
- if (r->rate > 127)
- r->rate = 127;
- if (r->rate == 125)
- r->rate = 124;
-}
-
-static int write_kbd_rate(struct kbd_repeat *rep)
-{
- int delay, rate;
- int i;
-
- delay = rep->delay / 5;
- rate = rep->rate;
- for (i = 0; i < 4; i++) {
- if (lk201_hook.poll_tx_char(lk201_handle,
- LK_CMD_RPT_RATE(i)))
- return 1;
- if (lk201_hook.poll_tx_char(lk201_handle,
- LK_PARAM_DELAY(delay)))
- return 1;
- if (lk201_hook.poll_tx_char(lk201_handle,
- LK_PARAM_RATE(rate)))
- return 1;
- }
- return 0;
-}
-
-static int lk201_kbd_rate(struct kbd_repeat *rep)
-{
- if (rep == NULL)
- return -EINVAL;
-
- parse_kbd_rate(rep);
-
- if (write_kbd_rate(rep)) {
- memcpy(rep, &kbdrate, sizeof(struct kbd_repeat));
- return -EIO;
- }
-
- memcpy(&kbdrate, rep, sizeof(struct kbd_repeat));
-
- return 0;
-}
-
-static void lk201_kd_mksound(unsigned int hz, unsigned int ticks)
-{
- if (!ticks)
- return;
-
- /*
- * Can't set frequency and we "approximate"
- * duration by volume. ;-)
- */
- ticks /= HZ / 32;
- if (ticks > 7)
- ticks = 7;
- ticks = 7 - ticks;
-
- if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_ENB_BELL))
- return;
- if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_VOLUME(ticks)))
- return;
- if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_BELL))
- return;
-}
-
-void kbd_leds(unsigned char leds)
-{
- unsigned char l = 0;
-
- if (!lk201_handle) /* FIXME */
- return;
-
- /* FIXME -- Only Hold and Lock LEDs for now. --macro */
- if (leds & LED_SCR)
- l |= LK_LED_HOLD;
- if (leds & LED_CAP)
- l |= LK_LED_LOCK;
-
- if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_ON))
- return;
- if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(l)))
- return;
- if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_OFF))
- return;
- if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(~l)))
- return;
-}
-
-int kbd_setkeycode(unsigned int scancode, unsigned int keycode)
-{
- return -EINVAL;
-}
-
-int kbd_getkeycode(unsigned int scancode)
-{
- return -EINVAL;
-}
-
-int kbd_translate(unsigned char scancode, unsigned char *keycode,
- char raw_mode)
-{
- *keycode = scancode;
- return 1;
-}
-
-char kbd_unexpected_up(unsigned char keycode)
-{
- return 0x80;
-}
-
-static void lk201_rx_char(unsigned char ch, unsigned char fl)
-{
- static unsigned char id[6];
- static int id_i;
-
- static int shift_state = 0;
- static int prev_scancode;
- unsigned char c = scancodeRemap[ch];
-
- if (fl != TTY_NORMAL && fl != TTY_OVERRUN) {
- printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n", fl);
- return;
- }
-
- /* Assume this is a power-up ID. */
- if (ch == LK_STAT_PWRUP_ID && !id_i) {
- id[id_i++] = ch;
- return;
- }
-
- /* Handle the power-up sequence. */
- if (id_i) {
- id[id_i++] = ch;
- if (id_i == 4) {
- /* OK, the power-up concluded. */
- lk201_report(id);
- if (id[2] == LK_STAT_PWRUP_OK)
- lk201_get_id();
- else {
- id_i = 0;
- printk(KERN_ERR "lk201: keyboard power-up "
- "error, skipping initialization\n");
- }
- } else if (id_i == 6) {
- /* We got the ID; report it and start operation. */
- id_i = 0;
- lk201_id(id);
- lk201_reset();
- }
- return;
- }
-
- /* Everything else is a scancode/status response. */
- id_i = 0;
- switch (ch) {
- case LK_STAT_RESUME_ERR:
- case LK_STAT_ERROR:
- case LK_STAT_INHIBIT_ACK:
- case LK_STAT_TEST_ACK:
- case LK_STAT_MODE_KEYDOWN:
- case LK_STAT_MODE_ACK:
- break;
- case LK_KEY_LOCK:
- shift_state ^= LK_LOCK;
- handle_scancode(c, (shift_state & LK_LOCK) ? 1 : 0);
- break;
- case LK_KEY_SHIFT:
- shift_state ^= LK_SHIFT;
- handle_scancode(c, (shift_state & LK_SHIFT) ? 1 : 0);
- break;
- case LK_KEY_CTRL:
- shift_state ^= LK_CTRL;
- handle_scancode(c, (shift_state & LK_CTRL) ? 1 : 0);
- break;
- case LK_KEY_COMP:
- shift_state ^= LK_COMP;
- handle_scancode(c, (shift_state & LK_COMP) ? 1 : 0);
- break;
- case LK_KEY_RELEASE:
- if (shift_state & LK_SHIFT)
- handle_scancode(scancodeRemap[LK_KEY_SHIFT], 0);
- if (shift_state & LK_CTRL)
- handle_scancode(scancodeRemap[LK_KEY_CTRL], 0);
- if (shift_state & LK_COMP)
- handle_scancode(scancodeRemap[LK_KEY_COMP], 0);
- if (shift_state & LK_LOCK)
- handle_scancode(scancodeRemap[LK_KEY_LOCK], 0);
- shift_state = 0;
- break;
- case LK_KEY_REPEAT:
- handle_scancode(prev_scancode, 1);
- break;
- default:
- prev_scancode = c;
- handle_scancode(c, 1);
- break;
- }
- tasklet_schedule(&keyboard_tasklet);
-}
-
-static void __init lk201_info(void *handle)
-{
-}
-
-static int __init lk201_init(void *handle)
-{
- /* First install handlers. */
- lk201_handle = handle;
- kbd_rate = lk201_kbd_rate;
- kd_mksound = lk201_kd_mksound;
-
- lk201_hook.rx_char = lk201_rx_char;
-
- /* Then just issue a reset -- the handlers will do the rest. */
- lk201_send(LK_CMD_POWER_UP);
-
- return 0;
-}
-
-void __init kbd_init_hw(void)
-{
- /* Maxine uses LK501 at the Access.Bus. */
- if (!LK_IFACE)
- return;
-
- printk(KERN_INFO "lk201: DECstation LK keyboard driver v0.05.\n");
-
- if (LK_IFACE_ZS) {
- /*
- * kbd_init_hw() is being called before
- * rs_init() so just register the kbd hook
- * and let zs_init do the rest :-)
- */
- if (!register_dec_serial_hook(KEYB_LINE, &lk201_hook))
- unregister_dec_serial_hook(KEYB_LINE);
- } else {
- /*
- * TODO: modify dz.c to allow similar hooks
- * for LK201 handling on DS2100, DS3100, and DS5000/200
- */
- printk(KERN_ERR "lk201: support for DZ11 not yet ready.\n");
- }
-}
diff -up --recursive --new-file linux-mips-2.6.23-rc5-20070904.macro/drivers/tc/lk201.h linux-mips-2.6.23-rc5-20070904/drivers/tc/lk201.h
--- linux-mips-2.6.23-rc5-20070904.macro/drivers/tc/lk201.h 2003-11-11 04:56:58.000000000 +0000
+++ linux-mips-2.6.23-rc5-20070904/drivers/tc/lk201.h 1970-01-01 00:00:00.000000000 +0000
@@ -1,125 +0,0 @@
-/*
- * Commands to the keyboard processor
- */
-
-#define LK_PARAM 0x80 /* start/end parameter list */
-
-#define LK_CMD_RESUME 0x8b /* resume transmission to the host */
-#define LK_CMD_INHIBIT 0x89 /* stop transmission to the host */
-#define LK_CMD_LEDS_ON 0x13 /* light LEDs */
- /* 1st param: led bitmask */
-#define LK_CMD_LEDS_OFF 0x11 /* turn off LEDs */
- /* 1st param: led bitmask */
-#define LK_CMD_DIS_KEYCLK 0x99 /* disable the keyclick */
-#define LK_CMD_ENB_KEYCLK 0x1b /* enable the keyclick */
- /* 1st param: volume */
-#define LK_CMD_DIS_CTLCLK 0xb9 /* disable the Ctrl keyclick */
-#define LK_CMD_ENB_CTLCLK 0xbb /* enable the Ctrl keyclick */
-#define LK_CMD_SOUND_CLK 0x9f /* emit a keyclick */
-#define LK_CMD_DIS_BELL 0xa1 /* disable the bell */
-#define LK_CMD_ENB_BELL 0x23 /* enable the bell */
- /* 1st param: volume */
-#define LK_CMD_BELL 0xa7 /* emit a bell */
-#define LK_CMD_TMP_NORPT 0xd1 /* disable typematic */
- /* for the currently pressed key */
-#define LK_CMD_ENB_RPT 0xe3 /* enable typematic */
- /* for RPT_DOWN groups */
-#define LK_CMD_DIS_RPT 0xe1 /* disable typematic */
- /* for RPT_DOWN groups */
-#define LK_CMD_RPT_TO_DOWN 0xd9 /* set RPT_DOWN groups to DOWN */
-#define LK_CMD_REQ_ID 0xab /* request the keyboard ID */
-#define LK_CMD_POWER_UP 0xfd /* init power-up sequence */
-#define LK_CMD_TEST_MODE 0xcb /* enter the factory test mode */
-#define LK_CMD_TEST_EXIT 0x80 /* exit the factory test mode */
-#define LK_CMD_SET_DEFAULTS 0xd3 /* set power-up defaults */
-
-#define LK_CMD_MODE(m,div) (LK_PARAM|(((div)&0xf)<<3)|(((m)&0x3)<<1))
- /* select the repeat mode */
- /* for the selected key group */
-#define LK_CMD_MODE_AR(m,div) ((((div)&0xf)<<3)|(((m)&0x3)<<1))
- /* select the repeat mode */
- /* and the repeat register */
- /* for the selected key group */
- /* 1st param: register number */
-#define LK_CMD_RPT_RATE(r) (0x78|(((r)&0x3)<<1))
- /* set the delay and repeat rate */
- /* for the selected repeat register */
- /* 1st param: initial delay */
- /* 2nd param: repeat rate */
-
-/* there are 4 leds, represent them in the low 4 bits of a byte */
-#define LK_PARAM_LED_MASK(ledbmap) (LK_PARAM|((ledbmap)&0xf))
-#define LK_LED_WAIT 0x1 /* Wait LED */
-#define LK_LED_COMP 0x2 /* Compose LED */
-#define LK_LED_LOCK 0x4 /* Lock LED */
-#define LK_LED_HOLD 0x8 /* Hold Screen LED */
-
-/* max volume is 0, lowest is 0x7 */
-#define LK_PARAM_VOLUME(v) (LK_PARAM|((v)&0x7))
-
-/* mode set command details, div is a key group number */
-#define LK_MODE_DOWN 0x0 /* make only */
-#define LK_MODE_RPT_DOWN 0x1 /* make and typematic */
-#define LK_MODE_DOWN_UP 0x3 /* make and release */
-
-/* there are 4 repeat registers */
-#define LK_PARAM_AR(r) (LK_PARAM|((v)&0x3))
-
-/*
- * Mappings between key groups and keycodes are as follows:
- *
- * 1: 0xbf - 0xff -- alphanumeric,
- * 2: 0x91 - 0xa5 -- numeric keypad,
- * 3: 0xbc -- Backspace,
- * 4: 0xbd - 0xbe -- Tab, Return,
- * 5: 0xb0 - 0xb2 -- Lock, Compose Character,
- * 6: 0xad - 0xaf -- Ctrl, Shift,
- * 7: 0xa6 - 0xa8 -- Left Arrow, Right Arrow,
- * 8: 0xa9 - 0xac -- Up Arrow, Down Arrow, Right Shift,
- * 9: 0x88 - 0x90 -- editor keypad,
- * 10: 0x56 - 0x62 -- F1 - F5,
- * 11: 0x63 - 0x6e -- F6 - F10,
- * 12: 0x6f - 0x7a -- F11 - F14,
- * 13: 0x7b - 0x7d -- Help, Do,
- * 14: 0x7e - 0x87 -- F17 - F20.
- *
- * Notes:
- * 1. Codes in the 0x00 - 0x40 range are reserved.
- * 2. The assignment of the 0x41 - 0x55 range is undiscovered, probably 10.
- */
-
-/* delay is 5 - 630 ms; 0x00 and 0x7f are reserved */
-#define LK_PARAM_DELAY(t) ((t)&0x7f)
-
-/* rate is 12 - 127 Hz; 0x00 - 0x0b and 0x7d (power-up!) are reserved */
-#define LK_PARAM_RATE(r) (LK_PARAM|((r)&0x7f))
-
-#define LK_SHIFT 1<<0
-#define LK_CTRL 1<<1
-#define LK_LOCK 1<<2
-#define LK_COMP 1<<3
-
-#define LK_KEY_SHIFT 0xae
-#define LK_KEY_CTRL 0xaf
-#define LK_KEY_LOCK 0xb0
-#define LK_KEY_COMP 0xb1
-
-#define LK_KEY_RELEASE 0xb3 /* all keys released */
-#define LK_KEY_REPEAT 0xb4 /* repeat the last key */
-
-/* status responses */
-#define LK_STAT_RESUME_ERR 0xb5 /* keystrokes lost while inhibited */
-#define LK_STAT_ERROR 0xb6 /* an invalid command received */
-#define LK_STAT_INHIBIT_ACK 0xb7 /* transmission inhibited */
-#define LK_STAT_TEST_ACK 0xb8 /* the factory test mode entered */
-#define LK_STAT_MODE_KEYDOWN 0xb9 /* a key is down on a change */
- /* to the DOWN_UP mode; */
- /* the keycode follows */
-#define LK_STAT_MODE_ACK 0xba /* the mode command succeeded */
-
-#define LK_STAT_PWRUP_ID 0x01 /* the power-up response start mark */
-#define LK_STAT_PWRUP_OK 0x00 /* the power-up self test OK */
-#define LK_STAT_PWRUP_KDOWN 0x3d /* a key was down during the test */
-#define LK_STAT_PWRUP_ERROR 0x3e /* keyboard self test failure */
-
-extern unsigned char scancodeRemap[256];
