Move Cobalt PCI definitions to arch/mips/pci/fixup-cobalt.c.
These definitions are only used in arch/mips/pci/fixup-cobalt.c.
They can be moved to fixup-cobalt.c.
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
diff -pruN -X mips/Documentation/dontdiff mips-orig/arch/mips/pci/fixup-cobalt.c mips/arch/mips/pci/fixup-cobalt.c
--- mips-orig/arch/mips/pci/fixup-cobalt.c 2007-09-14 14:24:04.932503500 +0900
+++ mips/arch/mips/pci/fixup-cobalt.c 2007-09-14 14:25:01.604045250 +0900
@@ -20,6 +20,23 @@
#include <cobalt.h>
#include <irq.h>
+/*
+ * PCI slot numbers
+ */
+#define COBALT_PCICONF_CPU 0x06
+#define COBALT_PCICONF_ETH0 0x07
+#define COBALT_PCICONF_RAQSCSI 0x08
+#define COBALT_PCICONF_VIA 0x09
+#define COBALT_PCICONF_PCISLOT 0x0A
+#define COBALT_PCICONF_ETH1 0x0C
+
+/*
+ * The Cobalt board ID information. The boards have an ID number wired
+ * into the VIA that is available in the high nibble of register 94.
+ */
+#define VIA_COBALT_BRD_ID_REG 0x94
+#define VIA_COBALT_BRD_REG_to_ID(reg) ((unsigned char)(reg) >> 4)
+
static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
{
if (dev->devfn == PCI_DEVFN(0, 0) &&
diff -pruN -X mips/Documentation/dontdiff mips-orig/include/asm-mips/mach-cobalt/cobalt.h mips/include/asm-mips/mach-cobalt/cobalt.h
--- mips-orig/include/asm-mips/mach-cobalt/cobalt.h 2007-09-14 14:24:04.952504750 +0900
+++ mips/include/asm-mips/mach-cobalt/cobalt.h 2007-09-14 14:21:49.180019500 +0900
@@ -13,37 +13,15 @@
#define __ASM_COBALT_H
/*
- * PCI configuration space manifest constants. These are wired into
- * the board layout according to the PCI spec to enable the software
- * to probe the hardware configuration space in a well defined manner.
- *
- * The PCI_DEVSHFT() macro transforms these values into numbers
- * suitable for passing as the dev parameter to the various
- * pcibios_read/write_config routines.
+ * The Cobalt board ID information.
*/
-#define COBALT_PCICONF_CPU 0x06
-#define COBALT_PCICONF_ETH0 0x07
-#define COBALT_PCICONF_RAQSCSI 0x08
-#define COBALT_PCICONF_VIA 0x09
-#define COBALT_PCICONF_PCISLOT 0x0A
-#define COBALT_PCICONF_ETH1 0x0C
-
+extern int cobalt_board_id;
-/*
- * The Cobalt board id information. The boards have an ID number wired
- * into the VIA that is available in the high nibble of register 94.
- * This register is available in the VIA configuration space through the
- * interface routines qube_pcibios_read/write_config. See cobalt/pci.c
- */
-#define VIA_COBALT_BRD_ID_REG 0x94
-#define VIA_COBALT_BRD_REG_to_ID(reg) ((unsigned char) (reg) >> 4)
#define COBALT_BRD_ID_QUBE1 0x3
#define COBALT_BRD_ID_RAQ1 0x4
#define COBALT_BRD_ID_QUBE2 0x5
#define COBALT_BRD_ID_RAQ2 0x6
-extern int cobalt_board_id;
-
#define COBALT_LED_PORT (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000))
# define COBALT_LED_BAR_LEFT (1 << 0) /* Qube */
# define COBALT_LED_BAR_RIGHT (1 << 1) /* Qube */
