Martin Michlmayr wrote:
* Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx> [2007-08-24 13:36]:
What error occurs on Raq1?
There is no error, but I never get a DHCP response:
Listening on LPF/eth0/00:10:e0:00:27:5c
Sending on LPF/eth0/00:10:e0:00:27:5c
Sending on Socket/fallback/fallback-net
DHCPREQUEST on eth0 to 255.255.255.255 port 67
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
No DHCPOFFERS received.
What does /proc/interrupts show after this ?
Does the networking work in CoLo ?
The "PCI retry count" thing is a red herring. There's no device at 06.0
so that's why you get the message. The kernel used to explicitly skip
this device when PCI retries were disabled otherwise it would hang. When
I enabled the PCI retry counter there was no need to skip it, you just
get the debug.
P.
