On Thu, Jul 12, 2007 at 06:39:00PM +0100, Maciej W. Rozycki wrote: > This is a driver for the SB1250 DUART, a dual serial port implementation > included in the Broadcom family of SOCs descending from the SiByte SB1250 > MIPS64 chip multiprocessor. It is a new implementation replacing the > old-fashioned driver currently present in the linux-mips.org tree. It > supports all the usual features one would expect from a(n asynchronous) > serial driver, including modem line control (as far as hardware supports > it -- there is edge detection logic missing from the DCD and RI lines and > the driver does not implement polling of these lines at the moment), the > serial console, BREAK transmission and reception, including the magic > SysRq. The receive FIFO threshold is not maintained though. > > Signed-off-by: Maciej W. Rozycki <macro@xxxxxxxxxxxxxx> I'm all in favor of this patch sine the old drivers/char/ serial driver has been slowly decaying while the kernel around it is changing. It would also make the kernel.org kernel finally usable for the Sibyte machines, so it's an improvment even if it doesn't have half a decade of testing under the belt, thus ACK. Ralf
