Signed-off-by: Franck Bui-Huu <fbuihuu@xxxxxxxxx>
---
arch/mips/Kconfig | 9 +
arch/mips/kernel/Makefile | 2 +
arch/mips/kernel/hpt.c | 294 ++++++++++++++++++++++++++
arch/mips/kernel/process.c | 2 +
arch/mips/kernel/smp.c | 1 +
arch/mips/kernel/time.c | 500 +++-----------------------------------------
arch/mips/lib/Makefile | 2 +-
arch/mips/lib/time.c | 52 +++++
include/asm-mips/hpt.h | 16 ++
include/asm-mips/time.h | 38 +----
10 files changed, 413 insertions(+), 503 deletions(-)
create mode 100644 arch/mips/kernel/hpt.c
create mode 100644 arch/mips/lib/time.c
create mode 100644 include/asm-mips/hpt.h
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7bcf38d..af073f3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -723,6 +723,14 @@ config GENERIC_TIME
bool
default y
+config GENERIC_CLOCKEVENTS
+ bool
+ default y
+
+config HPT_TIMER
+ bool
+ default y
+
config GENERIC_CMOS_UPDATE
bool
default y
@@ -1741,6 +1749,7 @@ config HZ
default 1000 if HZ_1000
default 1024 if HZ_1024
+source "kernel/time/Kconfig"
source "kernel/Kconfig.preempt"
config MIPS_INSANE_LARGE
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 4924626..7cc807c 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -11,6 +11,8 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \
binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \
irix5sys.o sysirix.o
+obj-$(CONFIG_HPT_TIMER) += hpt.o
+
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_MODULES) += mips_ksyms.o module.o
diff --git a/arch/mips/kernel/hpt.c b/arch/mips/kernel/hpt.c
new file mode 100644
index 0000000..0b5dbce
--- /dev/null
+++ b/arch/mips/kernel/hpt.c
@@ -0,0 +1,294 @@
+#include <linux/kernel_stat.h>
+#include <linux/spinlock.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+
+#include <asm/time.h>
+#include <asm/hpt.h>
+
+
+#define MIPS_HPT_NAME "MIPS-HPT"
+
+/*
+ * FIXME: Is it really needed ? Can it be 'static at least ?
+ */
+unsigned int mips_hpt_frequency __read_mostly;
+
+/*
+ * hpt can be disabled by boot command line
+ */
+static int hpt_disabled __initdata;
+
+static int __init nohpt_setup(char *str)
+{
+ hpt_disabled = 1;
+ return 0;
+}
+early_param("nohpt", nohpt_setup);
+
+/*
+ * cp0 hpt operations. Can be overriden by platform code
+ */
+void __weak mips_hpt_ack(void)
+{
+ write_c0_compare(read_c0_compare());
+}
+
+cycle_t __weak mips_hpt_read(void)
+{
+ return read_c0_count();
+}
+
+/*
+ * Clocksource
+ */
+struct clocksource hpt_clocksource = {
+ .name = MIPS_HPT_NAME,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .read = mips_hpt_read,
+};
+
+static int mips_hpt_rating(unsigned freq)
+{
+ return 200 + freq / 10000000;
+}
+
+static void __init setup_hpt_clocksource(unsigned freq)
+{
+ u64 mult;
+ unsigned shift = 0;
+
+ for (shift = 32; shift > 0; shift--) {
+ mult = (u64)NSEC_PER_SEC << shift;
+ do_div(mult, freq);
+ if ((mult >> 32) == 0)
+ break;
+ }
+
+ hpt_clocksource.shift = shift;
+ hpt_clocksource.mult = mult;
+ hpt_clocksource.rating = mips_hpt_rating(freq);
+
+ clocksource_register(&hpt_clocksource);
+}
+
+/*
+ * High precision timer functions for a R4k-compatible timer.
+ */
+
+static int mips_hpt_set_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ unsigned int cnt;
+
+ BUG_ON(evt->mode != CLOCK_EVT_MODE_ONESHOT);
+
+ /* interrupt ack is done by setting up the next event */
+ cnt = read_c0_count();
+ cnt += delta;
+ write_c0_compare(cnt);
+
+ return ((long)(read_c0_count() - cnt ) > 0) ? -ETIME : 0;
+}
+
+static void mips_hpt_setup(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ /* nothing to do */
+}
+
+static struct clock_event_device hpt_clockevent = {
+ .name = MIPS_HPT_NAME,
+ .mode = CLOCK_EVT_MODE_UNUSED,
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .set_mode = mips_hpt_setup,
+ .set_next_event = mips_hpt_set_next_event,
+ .irq = -1,
+};
+
+static DEFINE_PER_CPU(struct clock_event_device, hpt_clock_events);
+
+static void __init finalize_hpt_clockevent(unsigned freq)
+{
+ hpt_clockevent.mult = div_sc(freq, NSEC_PER_SEC, 32);
+ hpt_clockevent.max_delta_ns = clockevent_delta2ns(-1, &hpt_clockevent);
+ hpt_clockevent.min_delta_ns = clockevent_delta2ns(+1, &hpt_clockevent);
+ hpt_clockevent.rating = mips_hpt_rating(freq);
+}
+
+void __init setup_hpt_clockevent(void)
+{
+ struct clock_event_device *cd;
+
+ if (hpt_disabled)
+ return;
+
+ cd = &__get_cpu_var(hpt_clock_events);
+
+ memcpy(cd, &hpt_clockevent, sizeof(*cd));
+ cd->cpumask = cpumask_of_cpu(smp_processor_id());
+
+ clockevents_register_device(cd);
+}
+
+/*
+ * Performance counter IRQ or -1 if shared with timer
+ */
+int mipsxx_perfcount_irq;
+
+int null_perf_irq(void)
+{
+ return 0;
+}
+
+int (*perf_irq)(void) = null_perf_irq;
+
+EXPORT_SYMBOL(mipsxx_perfcount_irq);
+EXPORT_SYMBOL(null_perf_irq);
+EXPORT_SYMBOL(perf_irq);
+
+/*
+ * Possibly handle a performance counter interrupt.
+ * Return true if the timer interrupt should not be checked
+ */
+static inline int handle_perf_irq (int r2)
+{
+ /*
+ * The performance counter overflow interrupt may be shared with the
+ * timer interrupt (mipsxx_perfcount_irq < 0). If it is and a
+ * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
+ * and we can't reliably determine if a counter interrupt has also
+ * happened (!r2) then don't check for a timer interrupt.
+ */
+ return mipsxx_perfcount_irq < 0 &&
+ perf_irq() == IRQ_HANDLED &&
+ !r2;
+}
+
+static irqreturn_t hpt_interrupt(int irq, void *dev_id)
+{
+ const int r2 = cpu_has_mips_r2;
+ struct clock_event_device *cd;
+
+ /*
+ * Suckage alert:
+ * Before R2 of the architecture there was no way to see if a
+ * performance counter interrupt was pending, so we have to run
+ * the performance counter interrupt handler anyway.
+ */
+ if (handle_perf_irq(r2))
+ goto out;
+
+ /*
+ * The same applies to performance counter interrupts. But with the
+ * above we now know that the reason we got here must be a timer
+ * interrupt. Being the paranoiacs we are we check anyway.
+ */
+ if (!r2 || (read_c0_cause() & (1 << 30))) {
+ /*
+ * We always ack the counter since we never shuts it down.
+ * Therefore we can get interrupts whereas the hpt clock
+ * event device has been disabled.
+ */
+ mips_hpt_ack();
+
+ cd = &__get_cpu_var(hpt_clock_events);
+
+ if (cd->mode != CLOCK_EVT_MODE_SHUTDOWN)
+ cd->event_handler(cd);
+ }
+out:
+ return IRQ_HANDLED;
+}
+
+struct irqaction hpt_irqaction = {
+ .handler = hpt_interrupt,
+ .flags = IRQF_DISABLED | IRQF_PERCPU,
+ .name = MIPS_HPT_NAME,
+};
+
+
+/*
+ * These 2 functions are used by platforms which uses the hpt as
+ * timer.
+ */
+void __init setup_hpt_timer(unsigned freq, unsigned irq)
+{
+ if (!cpu_has_counter || hpt_disabled)
+ return;
+ if (freq == 0)
+ return;
+
+ BUG_ON(freq != mips_hpt_frequency);
+
+ finalize_hpt_clockevent(freq);
+ setup_hpt_clockevent();
+
+ /* Enable hpt interrupt. */
+ setup_irq(irq, &hpt_irqaction);
+
+ printk("Using %u.%03u MHz high precision timer.\n",
+ ((freq + 500) / 1000) / 1000,
+ ((freq + 500) / 1000) % 1000);
+}
+
+void __init setup_hpt_clock(unsigned freq)
+{
+ if (!cpu_has_counter || hpt_disabled)
+ return;
+ if (freq == 0)
+ return;
+
+ /* FIXME: shouldn't get rid of mips_hpt_frequency ? */
+ mips_hpt_frequency = freq;
+
+ setup_hpt_clocksource(freq);
+}
+
+/*
+ * If you don't know your hpt frequency and you have another
+ * timer you can use this helper to determinate the hpt freq.
+ */
+unsigned int __init calibrate_hpt(int (*timer_state)(void))
+{
+ cycle_t freq, start, end, count, hz;
+
+ const int loops = HZ / 10;
+ int log_2_loops = 0;
+ int i;
+
+ /*
+ * We want to calibrate for 0.1s, but to avoid a 64-bit
+ * division we round the number of loops up to the nearest
+ * power of 2.
+ */
+ while (loops > 1 << log_2_loops)
+ log_2_loops++;
+ i = 1 << log_2_loops;
+
+ /*
+ * Wait for a rising edge of the timer interrupt.
+ */
+ while (timer_state());
+ while (!timer_state());
+
+ /*
+ * Now see how many high precision timer ticks happen
+ * during the calculated number of periods between timer
+ * interrupts.
+ */
+ start = mips_hpt_read();
+ do {
+ while (timer_state());
+ while (!timer_state());
+ } while (--i);
+ end = mips_hpt_read();
+
+ count = end - start;
+ hz = HZ;
+ freq = count * hz;
+
+ return freq >> log_2_loops;
+}
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 6bdfb5a..b75aa6c 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -50,6 +50,7 @@ ATTRIB_NORET void cpu_idle(void)
{
/* endless idle loop with no priority at all */
while (1) {
+ tick_nohz_stop_sched_tick();
while (!need_resched()) {
#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
extern void smtc_idle_loop_hook(void);
@@ -59,6 +60,7 @@ ATTRIB_NORET void cpu_idle(void)
if (cpu_wait)
(*cpu_wait)();
}
+ tick_nohz_restart_sched_tick();
preempt_enable_no_resched();
schedule();
preempt_disable();
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 67edfa7..0d84d70 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -79,6 +79,7 @@ asmlinkage __cpuinit void start_secondary(void)
cpu_probe();
cpu_report();
per_cpu_trap_init();
+ setup_hpt_clockevent();
prom_init_secondary();
/*
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index a75d63b..3d0a575 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -1,507 +1,75 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@xxxxxxxxxx or jsun@xxxxxxxxxx
- * Copyright (c) 2003, 2004 Maciej W. Rozycki
- *
- * Common time service routines for MIPS machines. See
- * Documentation/mips/time.README.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/param.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/smp.h>
#include <linux/kernel_stat.h>
#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/bootinfo.h>
-#include <asm/cache.h>
-#include <asm/compiler.h>
-#include <asm/cpu.h>
-#include <asm/cpu-features.h>
-#include <asm/div64.h>
-#include <asm/sections.h>
#include <asm/time.h>
+#include <asm/hpt.h>
/*
- * The integer part of the number of usecs per jiffy is taken from tick,
- * but the fractional part is not recorded, so we calculate it using the
- * initial value of HZ. This aids systems where tick isn't really an
- * integer (e.g. for HZ = 128).
- */
-#define USECS_PER_JIFFY TICK_SIZE
-#define USECS_PER_JIFFY_FRAC ((unsigned long)(u32)((1000000ULL << 32) / HZ))
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-/*
- * forward reference
+ * RTC. By default we provide the null RTC hooks
*/
DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
-int __attribute__((weak)) rtc_mips_set_time(unsigned long sec)
-{
- return 0;
-}
-
-int __attribute__((weak)) rtc_mips_set_mmss(unsigned long nowtime)
-{
- return rtc_mips_set_time(nowtime);
-}
-
-int update_persistent_clock(struct timespec now)
-{
- return rtc_mips_set_mmss(now.tv_sec);
-}
-
-/* how many counter cycles in a jiffy */
-static unsigned long cycles_per_jiffy __read_mostly;
-
-/* expirelo is the count value for next CPU timer interrupt */
-static unsigned int expirelo;
-
-
-/*
- * Null timer ack for systems not needing one (e.g. i8254).
- */
-static void null_timer_ack(void) { /* nothing */ }
-
-/*
- * Null high precision timer functions for systems lacking one.
- */
-static cycle_t null_hpt_read(void)
+unsigned long __weak mips_rtc_get_time(void)
{
return 0;
}
-/*
- * Timer ack for an R4k-compatible timer of a known frequency.
- */
-static void c0_timer_ack(void)
+int __weak mips_rtc_set_time(unsigned long sec)
{
- unsigned int count;
-
- /* Ack this timer interrupt and set the next one. */
- expirelo += cycles_per_jiffy;
- write_c0_compare(expirelo);
-
- /* Check to see if we have missed any timer interrupts. */
- while (((count = read_c0_count()) - expirelo) < 0x7fffffff) {
- /* missed_timer_count++; */
- expirelo = count + cycles_per_jiffy;
- write_c0_compare(expirelo);
- }
+ return rtc_mips_set_time(sec);
}
-/*
- * High precision timer functions for a R4k-compatible timer.
- */
-static cycle_t c0_hpt_read(void)
-{
- return read_c0_count();
-}
+int __weak mips_rtc_set_mmss(unsigned long time)
+ {
+ return mips_rtc_set_time(time);
+ }
-/* For use both as a high precision timer and an interrupt source. */
-static void __init c0_hpt_timer_init(void)
+int update_persistent_clock(struct timespec now)
{
- expirelo = read_c0_count() + cycles_per_jiffy;
- write_c0_compare(expirelo);
+ return mips_rtc_set_mmss(now.tv_sec);
}
-int (*mips_timer_state)(void);
-void (*mips_timer_ack)(void);
-
+#if 0
/*
- * local_timer_interrupt() does profiling and process accounting
- * on a per-CPU basis.
- *
- * In UP mode, it is invoked from the (global) timer_interrupt.
- *
- * In SMP mode, it might invoked by per-CPU timer interrupt, or
- * a broadcasted inter-processor interrupt which itself is triggered
- * by the global timer interrupt.
+ * FIXME: we need to init rtc earlier since timekeeping_init()
+ * is called before time_init().
*/
-void local_timer_interrupt(int irq)
+unsigned long read_persistent_clock(void)
{
- profile_tick(CPU_PROFILING);
- update_process_times(user_mode(get_irq_regs()));
+ return mips_rtc_get_time();
}
+#endif
-/*
- * High-level timer interrupt service routines. This function
- * is set as irqaction->handler and is invoked through do_IRQ.
- */
-irqreturn_t timer_interrupt(int irq, void *dev_id)
+/* only during transition period */
+unsigned long rtc_mips_get_time(void)
{
- write_seqlock(&xtime_lock);
-
- mips_timer_ack();
-
- /*
- * call the generic timer interrupt handling
- */
- do_timer(1);
-
- write_sequnlock(&xtime_lock);
-
- /*
- * In UP mode, we call local_timer_interrupt() to do profiling
- * and process accouting.
- *
- * In SMP mode, local_timer_interrupt() is invoked by appropriate
- * low-level local timer interrupt handler.
- */
- local_timer_interrupt(irq);
-
- return IRQ_HANDLED;
+ return mips_rtc_get_time();
}
+EXPORT_SYMBOL(rtc_mips_get_time);
-int null_perf_irq(void)
+int rtc_mips_set_time(unsigned long sec)
{
- return 0;
-}
-
-EXPORT_SYMBOL(null_perf_irq);
-
-int (*perf_irq)(void) = null_perf_irq;
-
-EXPORT_SYMBOL(perf_irq);
-
-/*
- * Performance counter IRQ or -1 if shared with timer
- */
-int mipsxx_perfcount_irq;
-EXPORT_SYMBOL(mipsxx_perfcount_irq);
-
-/*
- * Possibly handle a performance counter interrupt.
- * Return true if the timer interrupt should not be checked
- */
-static inline int handle_perf_irq(int r2)
-{
- /*
- * The performance counter overflow interrupt may be shared with the
- * timer interrupt (mipsxx_perfcount_irq < 0). If it is and a
- * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
- * and we can't reliably determine if a counter interrupt has also
- * happened (!r2) then don't check for a timer interrupt.
- */
- return (mipsxx_perfcount_irq < 0) &&
- perf_irq() == IRQ_HANDLED &&
- !r2;
-}
-
-extern void smtc_timer_broadcast(int);
-
-void ll_timer_interrupt(int irq)
-{
- int cpu = smp_processor_id();
- int r2 = cpu_has_mips_r2;
-
- irq_enter();
- kstat_this_cpu.irqs[irq]++;
-
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * In an SMTC system, one Count/Compare set exists per VPE.
- * Which TC within a VPE gets the interrupt is essentially
- * random - we only know that it shouldn't be one with
- * IXMT set. Whichever TC gets the interrupt needs to
- * send special interprocessor interrupts to the other
- * TCs to make sure that they schedule, etc.
- *
- * That code is specific to the SMTC kernel, not to
- * the a particular platform, so it's invoked from
- * the general MIPS timer_interrupt routine.
- */
-
- /*
- * We could be here due to timer interrupt,
- * perf counter overflow, or both.
- */
- (void) handle_perf_irq(1);
-
- if (read_c0_cause() & (1 << 30)) {
- /*
- * There are things we only want to do once per tick
- * in an "MP" system. One TC of each VPE will take
- * the actual timer interrupt. The others will get
- * timer broadcast IPIs. We use whoever it is that takes
- * the tick on VPE 0 to run the full timer_interrupt().
- */
- if (cpu_data[cpu].vpe_id == 0) {
- timer_interrupt(irq, NULL);
- } else {
- write_c0_compare(read_c0_count() +
- (mips_hpt_frequency/HZ));
- local_timer_interrupt(irq);
- }
- smtc_timer_broadcast(cpu_data[cpu].vpe_id);
- }
-#else /* CONFIG_MIPS_MT_SMTC */
- if (handle_perf_irq(r2))
- goto out;
-
- if (r2 && ((read_c0_cause() & (1 << 30)) == 0))
- goto out;
-
- if (cpu == 0) {
- /*
- * CPU 0 handles the global timer interrupt job and process
- * accounting resets count/compare registers to trigger next
- * timer int.
- */
- timer_interrupt(irq, NULL);
- } else {
- /* Everyone else needs to reset the timer int here as
- ll_local_timer_interrupt doesn't */
- /*
- * FIXME: need to cope with counter underflow.
- * More support needs to be added to kernel/time for
- * counter/timer interrupts on multiple CPU's
- */
- write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
-
- /*
- * Other CPUs should do profiling and process accounting
- */
- local_timer_interrupt(irq);
- }
-out:
-#endif /* CONFIG_MIPS_MT_SMTC */
-
- irq_exit();
-}
-
-
-asmlinkage void ll_local_timer_interrupt(int irq)
-{
- irq_enter();
- if (smp_processor_id() != 0)
- kstat_this_cpu.irqs[irq]++;
-
- /* we keep interrupt disabled all the time */
- local_timer_interrupt(irq);
-
- irq_exit();
+ return mips_rtc_set_time(sec);
}
+EXPORT_SYMBOL(rtc_mips_set_time);
/*
- * time_init() - it does the following things.
- *
- * 1) plat_time_init() -
- * a) (optional) set up RTC routines,
- * b) (optional) calibrate and set the mips_hpt_frequency
- * (only needed if you intended to use cpu counter as timer interrupt
- * source)
- * 2) calculate a couple of cached variables for later usage
- * 3) plat_timer_setup() -
- * a) (optional) over-write any choices made above by time_init().
- * b) machine specific code should setup the timer irqaction.
- * c) enable the timer interrupt
+ * Basically it calls platform hooks to set up
+ * a) RTC
+ * b) a timer
*/
-
-unsigned int mips_hpt_frequency;
-
-static struct irqaction timer_irqaction = {
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
- .name = "timer",
-};
-
-static unsigned int __init calibrate_hpt(void)
-{
- cycle_t frequency, hpt_start, hpt_end, hpt_count, hz;
-
- const int loops = HZ / 10;
- int log_2_loops = 0;
- int i;
-
- /*
- * We want to calibrate for 0.1s, but to avoid a 64-bit
- * division we round the number of loops up to the nearest
- * power of 2.
- */
- while (loops > 1 << log_2_loops)
- log_2_loops++;
- i = 1 << log_2_loops;
-
- /*
- * Wait for a rising edge of the timer interrupt.
- */
- while (mips_timer_state());
- while (!mips_timer_state());
-
- /*
- * Now see how many high precision timer ticks happen
- * during the calculated number of periods between timer
- * interrupts.
- */
- hpt_start = clocksource_mips.read();
- do {
- while (mips_timer_state());
- while (!mips_timer_state());
- } while (--i);
- hpt_end = clocksource_mips.read();
-
- hpt_count = (hpt_end - hpt_start) & clocksource_mips.mask;
- hz = HZ;
- frequency = hpt_count * hz;
-
- return frequency >> log_2_loops;
-}
-
-struct clocksource clocksource_mips = {
- .name = "MIPS",
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void __init init_mips_clocksource(void)
-{
- u64 temp;
- u32 shift;
-
- if (!mips_hpt_frequency || clocksource_mips.read == null_hpt_read)
- return;
-
- /* Calclate a somewhat reasonable rating value */
- clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
- /* Find a shift value */
- for (shift = 32; shift > 0; shift--) {
- temp = (u64) NSEC_PER_SEC << shift;
- do_div(temp, mips_hpt_frequency);
- if ((temp >> 32) == 0)
- break;
- }
- clocksource_mips.shift = shift;
- clocksource_mips.mult = (u32)temp;
-
- clocksource_register(&clocksource_mips);
-}
-
-void __init __weak plat_time_init(void)
-{
-}
-
void __init time_init(void)
{
- plat_time_init();
-
- /* Choose appropriate high precision timer routines. */
- if (!cpu_has_counter && !clocksource_mips.read)
- /* No high precision timer -- sorry. */
- clocksource_mips.read = null_hpt_read;
- else if (!mips_hpt_frequency && !mips_timer_state) {
- /* A high precision timer of unknown frequency. */
- if (!clocksource_mips.read)
- /* No external high precision timer -- use R4k. */
- clocksource_mips.read = c0_hpt_read;
- } else {
- /* We know counter frequency. Or we can get it. */
- if (!clocksource_mips.read) {
- /* No external high precision timer -- use R4k. */
- clocksource_mips.read = c0_hpt_read;
-
- if (!mips_timer_state) {
- /* No external timer interrupt -- use R4k. */
- mips_timer_ack = c0_timer_ack;
- /* Calculate cache parameters. */
- cycles_per_jiffy =
- (mips_hpt_frequency + HZ / 2) / HZ;
- /*
- * This sets up the high precision
- * timer for the first interrupt.
- */
- c0_hpt_timer_init();
- }
- }
- if (!mips_hpt_frequency)
- mips_hpt_frequency = calibrate_hpt();
-
- /* Report the high precision timer rate for a reference. */
- printk("Using %u.%03u MHz high precision timer.\n",
- ((mips_hpt_frequency + 500) / 1000) / 1000,
- ((mips_hpt_frequency + 500) / 1000) % 1000);
- }
-
- if (!mips_timer_ack)
- /* No timer interrupt ack (e.g. i8254). */
- mips_timer_ack = null_timer_ack;
-
/*
- * Call board specific timer interrupt setup.
- *
- * this pointer must be setup in machine setup routine.
- *
- * Even if a machine chooses to use a low-level timer interrupt,
- * it still needs to setup the timer_irqaction.
- * In that case, it might be better to set timer_irqaction.handler
- * to be NULL function so that we are sure the high-level code
- * is not invoked accidentally.
+ * Mandatory platform hook. It basically setup the RTC.
+ * FIXME: shouldn't we call these before calling
+ * timekeeping_init() ?
*/
- plat_timer_setup(&timer_irqaction);
-
- init_mips_clocksource();
-}
-
-#define FEBRUARY 2
-#define STARTOFTIME 1970
-#define SECDAY 86400L
-#define SECYR (SECDAY * 365)
-#define leapyear(y) ((!((y) % 4) && ((y) % 100)) || !((y) % 400))
-#define days_in_year(y) (leapyear(y) ? 366 : 365)
-#define days_in_month(m) (month_days[(m) - 1])
-
-static int month_days[12] = {
- 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-};
-
-void to_tm(unsigned long tim, struct rtc_time *tm)
-{
- long hms, day, gday;
- int i;
-
- gday = day = tim / SECDAY;
- hms = tim % SECDAY;
-
- /* Hours, minutes, seconds are easy */
- tm->tm_hour = hms / 3600;
- tm->tm_min = (hms % 3600) / 60;
- tm->tm_sec = (hms % 3600) % 60;
-
- /* Number of years in days */
- for (i = STARTOFTIME; day >= days_in_year(i); i++)
- day -= days_in_year(i);
- tm->tm_year = i;
-
- /* Number of months in days left */
- if (leapyear(tm->tm_year))
- days_in_month(FEBRUARY) = 29;
- for (i = 1; day >= days_in_month(i); i++)
- day -= days_in_month(i);
- days_in_month(FEBRUARY) = 28;
- tm->tm_mon = i - 1; /* tm_mon starts from 0 to 11 */
-
- /* Days are what is left over (+1) from all that. */
- tm->tm_mday = day + 1;
+ plat_time_init();
/*
- * Determine the day of week
+ * Platform can setup a new timer, hpt timer or both...
*/
- tm->tm_wday = (gday + 4) % 7; /* 1970/1/1 was Thursday */
+ plat_timer_setup();
}
-
-EXPORT_SYMBOL(rtc_lock);
-EXPORT_SYMBOL(to_tm);
-EXPORT_SYMBOL(rtc_mips_set_time);
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 5dad13e..447e803 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -3,7 +3,7 @@
#
lib-y += csum_partial.o memcpy.o memcpy-inatomic.o memset.o strlen_user.o \
- strncpy_user.o strnlen_user.o uncached.o
+ strncpy_user.o strnlen_user.o time.o uncached.o
obj-y += iomap.o
obj-$(CONFIG_PCI) += iomap-pci.o
diff --git a/arch/mips/lib/time.c b/arch/mips/lib/time.c
new file mode 100644
index 0000000..e561050
--- /dev/null
+++ b/arch/mips/lib/time.c
@@ -0,0 +1,52 @@
+#include <asm/time.h>
+
+/*
+ * to_tm(). FIXME: should be shared with all archs...
+ */
+#define FEBRUARY 2
+#define STARTOFTIME 1970
+#define SECDAY 86400L
+#define SECYR (SECDAY * 365)
+#define leapyear(y) ((!((y) % 4) && ((y) % 100)) || !((y) % 400))
+#define days_in_year(y) (leapyear(y) ? 366 : 365)
+#define days_in_month(m) (month_days[(m) - 1])
+
+static int month_days[12] = {
+ 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
+};
+
+void to_tm(unsigned long tim, struct rtc_time *tm)
+{
+ long hms, day, gday;
+ int i;
+
+ gday = day = tim / SECDAY;
+ hms = tim % SECDAY;
+
+ /* Hours, minutes, seconds are easy */
+ tm->tm_hour = hms / 3600;
+ tm->tm_min = (hms % 3600) / 60;
+ tm->tm_sec = (hms % 3600) % 60;
+
+ /* Number of years in days */
+ for (i = STARTOFTIME; day >= days_in_year(i); i++)
+ day -= days_in_year(i);
+ tm->tm_year = i;
+
+ /* Number of months in days left */
+ if (leapyear(tm->tm_year))
+ days_in_month(FEBRUARY) = 29;
+ for (i = 1; day >= days_in_month(i); i++)
+ day -= days_in_month(i);
+ days_in_month(FEBRUARY) = 28;
+ tm->tm_mon = i - 1; /* tm_mon starts from 0 to 11 */
+
+ /* Days are what is left over (+1) from all that. */
+ tm->tm_mday = day + 1;
+
+ /*
+ * Determine the day of week
+ */
+ tm->tm_wday = (gday + 4) % 7; /* 1970/1/1 was Thursday */
+}
+EXPORT_SYMBOL(to_tm);
diff --git a/include/asm-mips/hpt.h b/include/asm-mips/hpt.h
new file mode 100644
index 0000000..08f7650
--- /dev/null
+++ b/include/asm-mips/hpt.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_HPT_H
+#define _ASM_HPT_H
+
+/*
+ * mips_hpt_frequency - must be set if you intend to use an R4k-compatible
+ * counter as a timer interrupt source; otherwise it can be set up
+ * automagically with an aid of mips_timer_state.
+ */
+extern unsigned int mips_hpt_frequency;
+
+
+extern void setup_hpt_clock(unsigned freq);
+extern void setup_hpt_timer(unsigned freq, unsigned irq);
+extern unsigned calibrate_hpt(int (*timer_state)(void));
+
+#endif /* _ASM_HPT_H */
diff --git a/include/asm-mips/time.h b/include/asm-mips/time.h
index 9a49a93..e63e51a 100644
--- a/include/asm-mips/time.h
+++ b/include/asm-mips/time.h
@@ -16,12 +16,7 @@
#ifndef _ASM_TIME_H
#define _ASM_TIME_H
-#include <linux/interrupt.h>
-#include <linux/linkage.h>
-#include <linux/ptrace.h>
#include <linux/rtc.h>
-#include <linux/spinlock.h>
-#include <linux/clocksource.h>
extern spinlock_t rtc_lock;
@@ -43,12 +38,6 @@ extern int (*mips_timer_state)(void);
extern void (*mips_timer_ack)(void);
/*
- * High precision timer clocksource.
- * If .read is NULL, an R4k-compatible timer setup is attempted.
- */
-extern struct clocksource clocksource_mips;
-
-/*
* to_tm() converts system time back to (year, mon, day, hour, min, sec).
* It is intended to help implement rtc_set_time() functions.
* Copied from PPC implementation.
@@ -56,32 +45,9 @@ extern struct clocksource clocksource_mips;
extern void to_tm(unsigned long tim, struct rtc_time *tm);
/*
- * high-level timer interrupt routines.
- */
-extern irqreturn_t timer_interrupt(int irq, void *dev_id);
-
-/*
- * the corresponding low-level timer interrupt routine.
+ * board specific hooks called by time_init().
*/
-extern void ll_timer_interrupt(int irq);
-
-/*
- * profiling and process accouting is done separately in local_timer_interrupt
- */
-extern void local_timer_interrupt(int irq);
-
-/*
- * board specific routines required by time_init().
- */
-struct irqaction;
extern void plat_time_init(void);
-extern void plat_timer_setup(struct irqaction *irq);
-
-/*
- * mips_hpt_frequency - must be set if you intend to use an R4k-compatible
- * counter as a timer interrupt source; otherwise it can be set up
- * automagically with an aid of mips_timer_state.
- */
-extern unsigned int mips_hpt_frequency;
+extern void plat_timer_setup(void);
#endif /* _ASM_TIME_H */
--
1.5.2.1
