I forgot adding the GENERIC_GPIO entry in Kconfig. The attached patch selects
GENERIC_GPIO for CONFIG_AU1X00.
Le lundi 21 mai 2007, Florian Fainelli a écrit :
> Hello Atsushi,
>
> Thank you very much for your comments. Here is an updated version which
> includes implementation for input/output directions and should take your
> comments into account.
>
> Le dimanche 20 mai 2007, Atsushi Nemoto a écrit :
> > On Sat, 19 May 2007 21:51:39 +0200, Florian Fainelli
>
> <florian.fainelli@xxxxxxxxxxxxx> wrote:
> > > diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h
> > > linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h ---
> > > linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h 2007-04-27
> > > 23:49:26.000000000 +0200 +++
> > > linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h 2007-05-1
> > >9 21:34:27.000000000 +0200 @@ -1,10 +1,7 @@
> >
> > ...
> >
> > > +/* Wrappers for the arch-neutral GPIO API */
> > > +
> > > +static inline int gpio_request(unsigned gpio, const char *label)
> > > +{
> > > + /* Not yet implemented */
> > > + return 0;
> > > +}
> > > +
> > > +static inline void gpio_free(unsigned gpio)
> > > +{
> > > + /* Not yet implemented */
> > > +}
> > > +
> > > +extern int gpio_direction_input(unsigned gpio);
> > > +extern int gpio_direction_output(unsigned gpio, int value);
> > > +
> > > +static inline int gpio_get_value(unsigned gpio)
> > > +{
> > > + return au1xxx_gpio_get_value(gpio);
> > > +}
> > > +
> > > +static inline void gpio_set_value(unsigned gpio, int value)
> > > +{
> > > + au1xxx_gpio_set_value(gpio, value);
> > > +}
> > > +
> > > +static inline int gpio_to_irq(unsigned gpio)
> > > +{
> > > + return gpio;
> > > +}
> > > +
> > > +static inline int irq_to_gpio(unsigned irq)
> > > +{
> > > + return irq;
> > > +}
> > > +
> > > +/* For cansleep */
> > > +#include <asm-generic/gpio.h>
> > > +
> > > +#endif /* _AU1XXX_GPIO_H_ */
> >
> > These APIs should be usable by "#include <asm/gpio.h>". So move
> > mach-au1x00/au1xxx_gpio.h to mach-au1x00/gpio.h and include it by
> > include/asm-mips/gpio.h (as Youichi said).
> >
> > And it seems gpio_direction_input()/gpio_direction_output() are not
> > implemented. A user of the GPIO API _should_ use these interfaces.
> >
> > ---
> > Atsushi Nemoto
--
Cordialement, Florian Fainelli
---------------------------------------------
diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h
--- linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h 2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h 1970-01-01 01:00:00.000000000 +0100
@@ -1,20 +0,0 @@
-#ifndef __AU1XXX_GPIO_H
-#define __AU1XXX_GPIO_H
-
-void au1xxx_gpio1_set_inputs(void);
-void au1xxx_gpio_tristate(int signal);
-void au1xxx_gpio_write(int signal, int value);
-int au1xxx_gpio_read(int signal);
-
-typedef volatile struct
-{
- u32 dir;
- u32 reserved;
- u32 output;
- u32 pinstate;
- u32 inten;
- u32 enable;
-
-} AU1X00_GPIO2;
-
-#endif //__AU1XXX_GPIO_H
diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h
--- linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h 2007-05-21 01:10:22.000000000 +0200
@@ -0,0 +1,69 @@
+#ifndef _AU1XXX_GPIO_H_
+#define _AU1XXX_GPIO_H_
+
+#define AU1XXX_GPIO_BASE 200
+
+typedef volatile struct
+{
+ u32 dir;
+ u32 reserved;
+ u32 output;
+ u32 pinstate;
+ u32 inten;
+ u32 enable;
+
+} AU1X00_GPIO2;
+
+extern int au1xxx_gpio_get_value(unsigned gpio);
+extern void au1xxx_gpio_set_value(unsigned gpio, int value);
+extern int au1xxx_gpio_direction_input(unsigned gpio);
+extern int au1xxx_gpio_direction_output(unsigned gpio, int value);
+
+
+/* Wrappers for the arch-neutral GPIO API */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+ /* Not yet implemented */
+ return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+ /* Not yet implemented */
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ return au1xxx_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ return au1xxx_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ return au1xxx_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ au1xxx_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return irq;
+}
+
+/* For cansleep */
+#include <asm-generic/gpio.h>
+
+#endif /* _AU1XXX_GPIO_H_ */
diff -urN linux-2.6.21.1/arch/mips/au1000/common/gpio.c linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c
--- linux-2.6.21.1/arch/mips/au1000/common/gpio.c 2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c 2007-05-21 01:27:53.000000000 +0200
@@ -1,4 +1,7 @@
/*
+ * Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@xxxxxxxxxxx>
+ * Architecture specific GPIO support
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -18,101 +21,128 @@
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Notes :
+ * au1000 SoC have only one GPIO line : GPIO1
+ * others have a second one : GPIO2
*/
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/types.h>
#include <linux/module.h>
-#include <au1000.h>
-#include <au1xxx_gpio.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/gpio.h>
#define gpio1 sys
#if !defined(CONFIG_SOC_AU1000)
static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE;
+#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
-#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
-
-int au1xxx_gpio2_read(int signal)
+static int au1xxx_gpio2_read(unsigned gpio)
{
- signal -= 200;
-/* gpio2->dir &= ~(0x01 << signal); //Set GPIO to input */
- return ((gpio2->pinstate >> signal) & 0x01);
+ gpio -= AU1XXX_GPIO_BASE;
+ return ((gpio2->pinstate >> gpio) & 0x01);
}
-void au1xxx_gpio2_write(int signal, int value)
+static void au1xxx_gpio2_write(unsigned gpio, int value)
{
- signal -= 200;
+ gpio -= AU1XXX_GPIO_BASE;
- gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) |
- (value << signal);
+ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) |
+ (value << gpio);
}
-void au1xxx_gpio2_tristate(int signal)
+static int au1xxx_gpio2_direction_input(unsigned gpio)
{
- signal -= 200;
- gpio2->dir &= ~(0x01 << signal); /* Set GPIO to input */
+ gpio -= AU1XXX_GPIO_BASE;
+ gpio2->dir &= ~(0x01 << gpio);
+ return 0;
}
-#endif
-int au1xxx_gpio1_read(int signal)
+static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
{
-/* gpio1->trioutclr |= (0x01 << signal); */
- return ((gpio1->pinstaterd >> signal) & 0x01);
+ gpio -= AU1XXX_GPIO_BASE;
+ gpio2->dir = (0x01 << gpio) | (value << gpio);
+ return 0;
}
-void au1xxx_gpio1_write(int signal, int value)
+#endif /* !defined(CONFIG_SOC_AU1000) */
+
+static int au1xxx_gpio1_read(unsigned gpio)
+{
+ return ((gpio1->pinstaterd >> gpio) & 0x01);
+}
+
+static void au1xxx_gpio1_write(unsigned gpio, int value)
{
if(value)
- gpio1->outputset = (0x01 << signal);
+ gpio1->outputset = (0x01 << gpio);
else
- gpio1->outputclr = (0x01 << signal); /* Output a Zero */
+ /* Output a zero */
+ gpio1->outputclr = (0x01 << gpio);
}
-void au1xxx_gpio1_tristate(int signal)
+static int au1xxx_gpio1_direction_input(unsigned gpio)
{
- gpio1->trioutclr = (0x01 << signal); /* Tristate signal */
+ gpio1->pininputen = 0;;
+ return 0;
}
+static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
+{
+ gpio1->trioutclr = (0x01 & gpio);
+ return 0;
+}
-int au1xxx_gpio_read(int signal)
+int au1xxx_gpio_get_value(unsigned gpio)
{
- if(signal >= 200)
+ if(gpio >= AU1XXX_GPIO_BASE)
#if defined(CONFIG_SOC_AU1000)
return 0;
#else
- return au1xxx_gpio2_read(signal);
+ return au1xxx_gpio2_read(gpio);
#endif
else
- return au1xxx_gpio1_read(signal);
+ return au1xxx_gpio1_read(gpio);
}
-void au1xxx_gpio_write(int signal, int value)
+void au1xxx_gpio_set_value(unsigned gpio, int value)
{
- if(signal >= 200)
+ if(gpio >= AU1XXX_GPIO_BASE)
#if defined(CONFIG_SOC_AU1000)
;
#else
- au1xxx_gpio2_write(signal, value);
+ au1xxx_gpio2_write(gpio, value);
#endif
else
- au1xxx_gpio1_write(signal, value);
+ au1xxx_gpio1_write(gpio, value);
}
-void au1xxx_gpio_tristate(int signal)
+int au1xxx_gpio_direction_input(unsigned gpio)
{
- if(signal >= 200)
+ if (gpio >= AU1XXX_GPIO_BASE)
#if defined(CONFIG_SOC_AU1000)
;
#else
- au1xxx_gpio2_tristate(signal);
+ return au1xxx_gpio2_direction_input(gpio);
#endif
else
- au1xxx_gpio1_tristate(signal);
+ return au1xxx_gpio1_direction_input(gpio);
}
-void au1xxx_gpio1_set_inputs(void)
+int au1xxx_gpio_direction_output(unsigned gpio, int value)
{
- gpio1->pininputen = 0;
+ if (gpio >= AU1XXX_GPIO_BASE)
+#if defined(CONFIG_SOC_AU1000)
+ ;
+#else
+ return au1xxx_gpio2_direction_output(gpio, value);
+#endif
+ else
+ return au1xxx_gpio1_direction_output(gpio, value);
}
-
-EXPORT_SYMBOL(au1xxx_gpio1_set_inputs);
-EXPORT_SYMBOL(au1xxx_gpio_tristate);
-EXPORT_SYMBOL(au1xxx_gpio_write);
-EXPORT_SYMBOL(au1xxx_gpio_read);
--- linux-2.6.21.1/arch/mips/Kconfig 2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1.new/arch/mips/Kconfig 2007-05-21 08:04:42.000000000 +0200
@@ -1044,6 +1044,7 @@
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_APM_EMULATION
select SYS_SUPPORTS_KGDB
+ select GENERIC_GPIO
config PNX8550
bool
Attachment:
pgp98al6L3sL7.pgp
Description: PGP signature
