Hi Manuel,
On Wed, 16 May 2007 07:34:40 +0200, Manuel Lauss wrote:
> Convert the i2c-au1550 driver to platform_driver.
>
> * Convert the core i2c-au1550 driver to platform_driver, get rid of
> the i2c-au1550.h file, and remove the unused pb1550_wm_codec_write().
> * register the platform device for Alchemy boards which previously
> defined the i2c psc base address in their headers.
> * update au1x psc header for the new driver style.
>
> arch/mips/au1000/common/platform.c | 22 ++
> drivers/i2c/busses/i2c-au1550.c | 311 ++++++++++++++----------------
> drivers/i2c/busses/i2c-au1550.h | 32 ---
> include/asm-mips/mach-au1x00/au1xxx_psc.h | 18 -
> 4 files changed, 177 insertions(+), 206 deletions(-)
>
> Signed-off-by: Manuel Lauss <mano@xxxxxxxxxxxxxxxxxxxxxxx>
>
> diff -Naurp linux-2.6.21-a/arch/mips/au1000/common/platform.c linux-2.6.21-au/arch/mips/au1000/common/platform.c
> --- linux-2.6.21-a/arch/mips/au1000/common/platform.c 2007-05-15 20:31:58.000000000 +0200
> +++ linux-2.6.21-au/arch/mips/au1000/common/platform.c 2007-05-15 20:21:15.000000000 +0200
> @@ -14,6 +14,7 @@
> #include <linux/resource.h>
>
> #include <asm/mach-au1x00/au1xxx.h>
> +#include <asm/mach-au1x00/au1xxx_psc.h>
>
> /* OHCI (USB full speed host controller) */
> static struct resource au1xxx_usb_ohci_resources[] = {
> @@ -270,6 +271,24 @@ static struct platform_device smc91x_dev
>
> #endif
>
> +/* All Alchemy demoboards with I2C have this #define in their headers */
> +#ifdef SMBUS_PSC_BASE
> +static struct resource pbdb_smbus_resources[] = {
> + {
> + .start = SMBUS_PSC_BASE,
> + .end = SMBUS_PSC_BASE + 0x24 - 1,
> + .flags = IORESOURCE_MEM,
> + },
> +};
> +
> +static struct platform_device pbdb_smbus_device = {
> + .name = "au1xpsc_smbus",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(pbdb_smbus_resources),
> + .resource = pbdb_smbus_resources,
> +};
> +#endif
> +
> static struct platform_device *au1xxx_platform_devices[] __initdata = {
> &au1xxx_usb_ohci_device,
> &au1x00_pcmcia_device,
> @@ -287,6 +306,9 @@ static struct platform_device *au1xxx_pl
> #ifdef CONFIG_MIPS_DB1200
> &smc91x_device,
> #endif
> +#ifdef SMBUS_PSC_BASE
> + &pbdb_smbus_device,
> +#endif
> };
>
> int au1xxx_platform_init(void)
> diff -Naurp linux-2.6.21-a/drivers/i2c/busses/i2c-au1550.c linux-2.6.21-au/drivers/i2c/busses/i2c-au1550.c
> --- linux-2.6.21-a/drivers/i2c/busses/i2c-au1550.c 2007-05-15 20:32:44.000000000 +0200
> +++ linux-2.6.21-au/drivers/i2c/busses/i2c-au1550.c 2007-05-15 21:39:34.000000000 +0200
> @@ -33,29 +33,31 @@
> #include <linux/init.h>
> #include <linux/errno.h>
> #include <linux/i2c.h>
> +#include <linux/platform_device.h>
>
> #include <asm/mach-au1x00/au1xxx.h>
> #include <asm/mach-au1x00/au1xxx_psc.h>
>
> -#include "i2c-au1550.h"
> +struct i2c_au1550_data {
> + u32 psc_base;
> + int xfer_timeout;
> + int ack_timeout;
> + struct i2c_adapter adap;
> +};
>
> static int
> wait_xfer_done(struct i2c_au1550_data *adap)
> {
> - u32 stat;
> + u32 stat, base = adap->psc_base;
> int i;
> - volatile psc_smb_t *sp;
> -
> - sp = (volatile psc_smb_t *)(adap->psc_base);
>
> /* Wait for Tx FIFO Underflow.
> */
> for (i = 0; i < adap->xfer_timeout; i++) {
> - stat = sp->psc_smbevnt;
> - au_sync();
> + stat = au_readl(base + PSC_SMBEVNT);
> if ((stat & PSC_SMBEVNT_TU) != 0) {
> /* Clear it. */
> - sp->psc_smbevnt = PSC_SMBEVNT_TU;
> + au_writel(PSC_SMBEVNT_TU, base + PSC_SMBEVNT);
> au_sync();
> return 0;
> }
> @@ -68,18 +70,13 @@ wait_xfer_done(struct i2c_au1550_data *a
> static int
> wait_ack(struct i2c_au1550_data *adap)
> {
> - u32 stat;
> - volatile psc_smb_t *sp;
> + u32 stat, base = adap->psc_base;
>
> if (wait_xfer_done(adap))
> return -ETIMEDOUT;
>
> - sp = (volatile psc_smb_t *)(adap->psc_base);
> -
> - stat = sp->psc_smbevnt;
> - au_sync();
> -
> - if ((stat & (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | PSC_SMBEVNT_AL)) != 0)
> + stat = au_readl(base + PSC_SMBEVNT);
> + if (stat & (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | PSC_SMBEVNT_AL))
This cleanup doesn't belong to this patch.
> return -ETIMEDOUT;
>
> return 0;
> @@ -88,17 +85,13 @@ wait_ack(struct i2c_au1550_data *adap)
> static int
> wait_master_done(struct i2c_au1550_data *adap)
> {
> - u32 stat;
> - int i;
> - volatile psc_smb_t *sp;
> -
> - sp = (volatile psc_smb_t *)(adap->psc_base);
> + u32 stat, base = adap->psc_base;
> + int i;
>
> /* Wait for Master Done.
> */
> for (i = 0; i < adap->xfer_timeout; i++) {
> - stat = sp->psc_smbevnt;
> - au_sync();
> + stat = au_readl(base + PSC_SMBEVNT);
> if ((stat & PSC_SMBEVNT_MD) != 0)
> return 0;
> udelay(1);
> @@ -110,24 +103,18 @@ wait_master_done(struct i2c_au1550_data
> static int
> do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd)
> {
> - volatile psc_smb_t *sp;
> - u32 stat;
> -
> - sp = (volatile psc_smb_t *)(adap->psc_base);
> + u32 stat, base = adap->psc_base;
>
> /* Reset the FIFOs, clear events.
> */
> - stat = sp->psc_smbstat;
> - sp->psc_smbevnt = PSC_SMBEVNT_ALLCLR;
> + stat = au_readl(base + PSC_SMBSTAT);
> + au_writel(PSC_SMBEVNT_ALLCLR, base + PSC_SMBEVNT);
> au_sync();
> -
> if (!(stat & PSC_SMBSTAT_TE) || !(stat & PSC_SMBSTAT_RE)) {
> - sp->psc_smbpcr = PSC_SMBPCR_DC;
> + au_writel(PSC_SMBPCR_DC, base + PSC_SMBPCR);
> au_sync();
> - do {
> - stat = sp->psc_smbpcr;
> - au_sync();
> - } while ((stat & PSC_SMBPCR_DC) != 0);
> + while (au_readl(base + PSC_SMBPCR) & PSC_SMBPCR_DC)
> + msleep(0);
You are changing the behavior here, while this patch is supposed to
only convert the driver to the new device driver model.
> udelay(50);
> }
>
> @@ -139,44 +126,37 @@ do_address(struct i2c_au1550_data *adap,
>
> /* Put byte into fifo, start up master.
> */
> - sp->psc_smbtxrx = addr;
> + au_writel(addr, base + PSC_SMBTXRX);
> au_sync();
> - sp->psc_smbpcr = PSC_SMBPCR_MS;
> + au_writel(PSC_SMBPCR_MS, base + PSC_SMBPCR);
> au_sync();
> - if (wait_ack(adap))
> - return -EIO;
> - return 0;
> +
> + return wait_ack(adap) ? -EIO : 0;
This cleanup doesn't belong to this patch.
> }
>
> static u32
> wait_for_rx_byte(struct i2c_au1550_data *adap, u32 *ret_data)
> {
> - int j;
> - u32 data, stat;
> - volatile psc_smb_t *sp;
> + u32 stat, base = adap->psc_base;
> + int j;
>
> if (wait_xfer_done(adap))
> return -EIO;
>
> - sp = (volatile psc_smb_t *)(adap->psc_base);
> -
> j = adap->xfer_timeout * 100;
> do {
> j--;
> if (j <= 0)
> return -EIO;
>
> - stat = sp->psc_smbstat;
> - au_sync();
> + stat = au_readl(base + PSC_SMBSTAT);
> if ((stat & PSC_SMBSTAT_RE) == 0)
> j = 0;
> else
> udelay(1);
> } while (j > 0);
> - data = sp->psc_smbtxrx;
> - au_sync();
> - *ret_data = data;
>
> + *ret_data = au_readl(base + PSC_SMBTXRX);
> return 0;
> }
>
> @@ -184,9 +164,8 @@ static int
> i2c_read(struct i2c_au1550_data *adap, unsigned char *buf,
> unsigned int len)
> {
> - int i;
> - u32 data;
> - volatile psc_smb_t *sp;
> + u32 data, base = adap->psc_base;
> + int i;
>
> if (len == 0)
> return 0;
> @@ -196,11 +175,9 @@ i2c_read(struct i2c_au1550_data *adap, u
> * receive fifo, then reading the bytes.
> */
>
> - sp = (volatile psc_smb_t *)(adap->psc_base);
> -
> i = 0;
> while (i < (len-1)) {
> - sp->psc_smbtxrx = 0;
> + au_writel(0, base + PSC_SMBTXRX);
> au_sync();
> if (wait_for_rx_byte(adap, &data))
> return -EIO;
> @@ -211,14 +188,12 @@ i2c_read(struct i2c_au1550_data *adap, u
>
> /* The last byte has to indicate transfer done.
> */
> - sp->psc_smbtxrx = PSC_SMBTXRX_STP;
> + au_writel(PSC_SMBTXRX_STP, base + PSC_SMBTXRX);
> au_sync();
> if (wait_master_done(adap))
> return -EIO;
>
> - data = sp->psc_smbtxrx;
> - au_sync();
> - buf[i] = data;
> + buf[i] = au_readl(base + PSC_SMBTXRX);
> return 0;
> }
>
> @@ -226,19 +201,15 @@ static int
> i2c_write(struct i2c_au1550_data *adap, unsigned char *buf,
> unsigned int len)
> {
> - int i;
> - u32 data;
> - volatile psc_smb_t *sp;
> + u32 base = adap->psc_base;
> + int i;
>
> if (len == 0)
> return 0;
>
> - sp = (volatile psc_smb_t *)(adap->psc_base);
> -
> i = 0;
> while (i < (len-1)) {
> - data = buf[i];
> - sp->psc_smbtxrx = data;
> + au_writel(buf[i], base + PSC_SMBTXRX);
> au_sync();
> if (wait_ack(adap))
> return -EIO;
> @@ -247,9 +218,7 @@ i2c_write(struct i2c_au1550_data *adap,
>
> /* The last byte has to indicate transfer done.
> */
> - data = buf[i];
> - data |= PSC_SMBTXRX_STP;
> - sp->psc_smbtxrx = data;
> + au_writel(buf[i] | PSC_SMBTXRX_STP, base + PSC_SMBTXRX);
> au_sync();
> if (wait_master_done(adap))
> return -EIO;
> @@ -259,26 +228,27 @@ i2c_write(struct i2c_au1550_data *adap,
> static int
> au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
> {
> - struct i2c_au1550_data *adap = i2c_adap->algo_data;
> - volatile psc_smb_t *sp = (volatile psc_smb_t *)(adap->psc_base);
> + struct i2c_au1550_data *priv = i2c_adap->algo_data;
> struct i2c_msg *p;
> - int i, err = 0;
> + int i, err;
>
> + err = 0;
This change isn't very useful, most developers actually prefer the
original way.
> for (i = 0; !err && i < num; i++) {
> p = &msgs[i];
> - err = do_address(adap, p->addr, p->flags & I2C_M_RD);
> + err = do_address(priv, p->addr, p->flags & I2C_M_RD);
> if (err || ((!p->len) && (i == (num - 1)))) {
> - sp->psc_smbtxrx = PSC_SMBTXRX_STP;
> + au_writel(PSC_SMBTXRX_STP,
> + priv->psc_base + PSC_SMBTXRX);
> au_sync();
> - wait_master_done(adap);
> + wait_master_done(priv);
> continue;
> }
> if (!p->len)
> continue;
> if (p->flags & I2C_M_RD)
> - err = i2c_read(adap, p->buf, p->len);
> + err = i2c_read(priv, p->buf, p->len);
> else
> - err = i2c_write(adap, p->buf, p->len);
> + err = i2c_write(priv, p->buf, p->len);
> }
>
> /* Return the number of messages processed, or the error code.
> @@ -304,136 +274,151 @@ static const struct i2c_algorithm au1550
> * Prior to calling us, the 50MHz clock frequency and routing
> * must have been set up for the PSC indicated by the adapter.
> */
> -int
> -i2c_au1550_add_bus(struct i2c_adapter *i2c_adap)
> +static int
> +i2c_au1550_probe(struct platform_device *pdev)
> {
> - struct i2c_au1550_data *adap = i2c_adap->algo_data;
> - volatile psc_smb_t *sp;
> - u32 stat;
> -
> - i2c_adap->algo = &au1550_algo;
> + struct i2c_au1550_data *priv;
> + struct resource *r;
> + u32 base, cfg;
> + int ret;
> +
> + ret = -ENODEV;
> + r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!r)
> + goto out;
> + base = r->start;
> +
> + priv = kzalloc(sizeof(struct i2c_au1550_data), GFP_KERNEL);
> + if (!priv)
> + goto out;
> +
> + priv->psc_base = base;
> + priv->xfer_timeout = 200;
> + priv->ack_timeout = 200;
> +
> + priv->adap.id = I2C_HW_AU1550_PSC,
> + priv->adap.algo = &au1550_algo;
> + priv->adap.algo_data = priv;
> + priv->adap.dev.parent = &pdev->dev;
We usually don't do such alignments in the code.
> + strcpy(priv->adap.name, "Au1550 PSC I2C");
strlcpy(priv->adap.name, "Au1550 PSC I2C", sizeof(priv->adap.name));
>
> /* Now, set up the PSC for SMBus PIO mode.
> */
> - sp = (volatile psc_smb_t *)(adap->psc_base);
> - sp->psc_ctrl = PSC_CTRL_DISABLE;
> + au_writel(PSC_CTRL_DISABLE, base + PSC_CTRL_OFFSET);
> au_sync();
> - sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
> - sp->psc_smbcfg = 0;
> + au_writel(PSC_SEL_PS_SMBUSMODE, base + PSC_SEL_OFFSET);
> + au_writel(0, base + PSC_SMBCFG);
> au_sync();
> - sp->psc_ctrl = PSC_CTRL_ENABLE;
> + au_writel(PSC_CTRL_ENABLE, base + PSC_CTRL_OFFSET);
> au_sync();
> - do {
> - stat = sp->psc_smbstat;
> + while (!(au_readl(base + PSC_SMBSTAT) & PSC_SMBSTAT_SR))
> au_sync();
> - } while ((stat & PSC_SMBSTAT_SR) == 0);
>
> - sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 |
> - PSC_SMBCFG_DD_DISABLE);
> + cfg = PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 |
No tab please.
> + PSC_SMBCFG_DD_DISABLE;
>
> - /* Divide by 8 to get a 6.25 MHz clock. The later protocol
> - * timings are based on this clock.
> + au_writel(PSC_SMBMSK_ALLMASK, base + PSC_SMBMSK);
> +
> + /* Divide by 8 to get a 6.25 MHz clock. The protocol timings
> + * below are based on this clock. (96MHz AUXPLL assumed!)
> */
> - sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
> - sp->psc_smbmsk = PSC_SMBMSK_ALLMASK;
> + cfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
> + au_writel(cfg, base + PSC_SMBCFG);
> au_sync();
>
> /* Set the protocol timer values. See Table 71 in the
> * Au1550 Data Book for standard timing values.
> */
> - sp->psc_smbtmr = PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
> - PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \
> - PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \
> - PSC_SMBTMR_SET_CH(15);
> + au_writel(PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
> + PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \
> + PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \
These trailing backslashes don't seem needed at all?
> + PSC_SMBTMR_SET_CH(15), base + PSC_SMBTMR);
> au_sync();
>
> - sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE;
> - do {
> - stat = sp->psc_smbstat;
> + cfg |= PSC_SMBCFG_DE_ENABLE;
> + au_writel(cfg, base + PSC_SMBCFG);
> + au_sync();
You're adding a call to au_sync() here compared to the original code.
Is this on purpose?
> +
> + while (!(au_readl(base + PSC_SMBSTAT) & PSC_SMBSTAT_DR))
> au_sync();
> - } while ((stat & PSC_SMBSTAT_DR) == 0);
>
> - return i2c_add_adapter(i2c_adap);
> -}
> + ret = i2c_add_adapter(&priv->adap);
> + if (ret == 0) {
> + platform_set_drvdata(pdev, priv);
> + return 0;
> + }
>
> + au_writel(0, base + PSC_SMBCFG);
> + au_writel(PSC_CTRL_DISABLE, base + PSC_CTRL_OFFSET);
> + au_sync();
>
> -int
> -i2c_au1550_del_bus(struct i2c_adapter *adap)
> -{
> - return i2c_del_adapter(adap);
> + kfree(priv);
> +out: return ret;
Label should be on its own line.
> }
>
> static int
> -pb1550_reg(struct i2c_client *client)
> +i2c_au1550_remove(struct platform_device *pdev)
> {
> - return 0;
> + struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
> + u32 base;
> +
> + if (priv) {
This test doesn't seem needed, there's no way this function can be
called if i2c_au1550_probe() didn't succeed, so the driver data must
have been set.
> + platform_set_drvdata(pdev, NULL);
> + base = priv->psc_base;
> + i2c_del_adapter(&priv->adap);
> + au_writel(0, base + PSC_SMBCFG);
> + au_writel(PSC_CTRL_DISABLE, base + PSC_CTRL_OFFSET);
> + au_sync();
> + kfree(priv);
> + }
> + return 0;
> }
>
> static int
> -pb1550_unreg(struct i2c_client *client)
> +i2c_au1550_suspend(struct platform_device *pdev, pm_message_t state)
> {
> + struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
> + u32 base = priv->psc_base;
> +
> + au_writel(PSC_CTRL_SUSPEND, base + PSC_CTRL_OFFSET);
> + au_sync();
> return 0;
> }
>
> -static struct i2c_au1550_data pb1550_i2c_info = {
> - SMBUS_PSC_BASE, 200, 200
> -};
> -
> -static struct i2c_adapter pb1550_board_adapter = {
> - name: "pb1550 adapter",
> - id: I2C_HW_AU1550_PSC,
> - algo: NULL,
> - algo_data: &pb1550_i2c_info,
> - client_register: pb1550_reg,
> - client_unregister: pb1550_unreg,
> -};
> -
> -/* BIG hack to support the control interface on the Wolfson WM8731
> - * audio codec on the Pb1550 board. We get an address and two data
> - * bytes to write, create an i2c message, and send it across the
> - * i2c transfer function. We do this here because we have access to
> - * the i2c adapter structure.
> - */
> -static struct i2c_msg wm_i2c_msg; /* We don't want this stuff on the stack */
> -static u8 i2cbuf[2];
> -
> -int
> -pb1550_wm_codec_write(u8 addr, u8 reg, u8 val)
> +static int
> +i2c_au1550_resume(struct platform_device *pdev)
> {
> - wm_i2c_msg.addr = addr;
> - wm_i2c_msg.flags = 0;
> - wm_i2c_msg.buf = i2cbuf;
> - wm_i2c_msg.len = 2;
> - i2cbuf[0] = reg;
> - i2cbuf[1] = val;
> + struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
> + u32 base = priv->psc_base;
>
> - return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, &wm_i2c_msg, 1);
> + au_writel(PSC_CTRL_ENABLE, base + PSC_CTRL_OFFSET);
> + au_sync();
> + while (!(au_readl(base + PSC_SMBSTAT) & PSC_SMBSTAT_SR))
> + au_sync();
> + return 0;
> }
>
> +static struct platform_driver au1xpsc_smbus_driver = {
> + .driver = {
> + .name = "au1xpsc_smbus",
Maybe you want to add a MODULE_ALIAS so that the driver can be loaded
automatically?
> + .owner = THIS_MODULE,
> + },
> + .probe = i2c_au1550_probe,
> + .remove = __devexit_p(i2c_au1550_remove),
> + .suspend = i2c_au1550_suspend,
> + .resume = i2c_au1550_resume,
> +};
> +
> static int __init
> i2c_au1550_init(void)
> {
> - printk(KERN_INFO "Au1550 I2C: ");
> -
> - /* This is where we would set up a 50MHz clock source
> - * and routing. On the Pb1550, the SMBus is PSC2, which
> - * uses a shared clock with USB. This has been already
> - * configured by Yamon as a 48MHz clock, close enough
> - * for our work.
> - */
> - if (i2c_au1550_add_bus(&pb1550_board_adapter) < 0) {
> - printk("failed to initialize.\n");
> - return -ENODEV;
> - }
> -
> - printk("initialized.\n");
> - return 0;
> + return platform_driver_register(&au1xpsc_smbus_driver);
> }
>
> static void __exit
> i2c_au1550_exit(void)
> {
> - i2c_au1550_del_bus(&pb1550_board_adapter);
> + platform_driver_unregister(&au1xpsc_smbus_driver);
> }
>
> MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC.");
> diff -Naurp linux-2.6.21-a/drivers/i2c/busses/i2c-au1550.h linux-2.6.21-au/drivers/i2c/busses/i2c-au1550.h
> --- linux-2.6.21-a/drivers/i2c/busses/i2c-au1550.h 2007-05-15 20:32:02.000000000 +0200
> +++ linux-2.6.21-au/drivers/i2c/busses/i2c-au1550.h 1970-01-01 01:00:00.000000000 +0100
> @@ -1,32 +0,0 @@
> -/*
> - * Copyright (C) 2004 Embedded Edge, LLC <dan@xxxxxxxxxxxxxxxx>
> - * 2.6 port by Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> - */
> -
> -#ifndef I2C_AU1550_H
> -#define I2C_AU1550_H
> -
> -struct i2c_au1550_data {
> - u32 psc_base;
> - int xfer_timeout;
> - int ack_timeout;
> -};
> -
> -int i2c_au1550_add_bus(struct i2c_adapter *);
> -int i2c_au1550_del_bus(struct i2c_adapter *);
> -
> -#endif /* I2C_AU1550_H */
> diff -Naurp linux-2.6.21-a/include/asm-mips/mach-au1x00/au1xxx_psc.h linux-2.6.21-au/include/asm-mips/mach-au1x00/au1xxx_psc.h
> --- linux-2.6.21-a/include/asm-mips/mach-au1x00/au1xxx_psc.h 2007-05-15 20:32:16.000000000 +0200
> +++ linux-2.6.21-au/include/asm-mips/mach-au1x00/au1xxx_psc.h 2007-05-15 20:21:15.000000000 +0200
> @@ -412,17 +412,13 @@ typedef struct psc_spi {
>
> /* PSC in SMBus (I2C) Mode.
> */
> -typedef struct psc_smb {
> - u32 psc_sel;
> - u32 psc_ctrl;
> - u32 psc_smbcfg;
> - u32 psc_smbmsk;
> - u32 psc_smbpcr;
> - u32 psc_smbstat;
> - u32 psc_smbevnt;
> - u32 psc_smbtxrx;
> - u32 psc_smbtmr;
> -} psc_smb_t;
> +#define PSC_SMBCFG 0x08
> +#define PSC_SMBMSK 0x0C
> +#define PSC_SMBPCR 0x10
> +#define PSC_SMBSTAT 0x14
> +#define PSC_SMBEVNT 0x18
> +#define PSC_SMBTXRX 0x1C
> +#define PSC_SMBTMR 0x20
>
> /* SMBus Config Register.
> */
Other than these minor comments, the patch looks really good. Thanks
for your work. Domen, feel free to add you own comments.
Thanks,
--
Jean Delvare
