From: Franck Bui-Huu <fbuihuu@xxxxxxxxx>
This patch introduces plat_clk_setup() which is a hook that platforms
can implement to setup clock and mips_hpt_frequency.
This was done by board_time_init function pointer previously.
There are 3 reasons why we should prefer plat_clk_setup() over
board_time_init:
1/ There's no need for platforms to initialize a function
pointer anymore.
2/ board_time_init was previously initialized in plat_mem_setup()
which is normally used to setup platform's *memories*.
3/ plat_clk_setup() is called earlier in boot process. Therefore
others subsystems can get the time during their initialisation,
timekeeping subsystem is an example.
Signed-off-by: Franck Bui-Huu <fbuihuu@xxxxxxxxx>
---
arch/mips/au1000/common/setup.c | 2 --
arch/mips/au1000/common/time.c | 4 ----
arch/mips/basler/excite/excite_setup.c | 5 +----
arch/mips/ddb5xxx/ddb5477/setup.c | 4 +---
arch/mips/dec/setup.c | 3 ---
arch/mips/dec/time.c | 2 +-
arch/mips/emma2rh/markeins/setup.c | 4 +---
arch/mips/gt64120/wrppmc/setup.c | 4 ----
arch/mips/gt64120/wrppmc/time.c | 2 +-
arch/mips/jmr3927/rbhma3100/setup.c | 4 +---
arch/mips/kernel/setup.c | 13 +++++++++++++
arch/mips/kernel/time.c | 16 +++-------------
arch/mips/lasat/setup.c | 4 +---
arch/mips/mips-boards/atlas/atlas_setup.c | 2 --
arch/mips/mips-boards/generic/time.c | 2 +-
arch/mips/mips-boards/malta/malta_setup.c | 2 --
arch/mips/mips-boards/sead/sead_setup.c | 4 ----
arch/mips/mips-boards/sim/sim_setup.c | 2 --
arch/mips/mips-boards/sim/sim_time.c | 2 +-
arch/mips/momentum/jaguar_atx/setup.c | 6 +-----
arch/mips/momentum/ocelot_3/setup.c | 5 +----
arch/mips/momentum/ocelot_c/setup.c | 8 ++------
arch/mips/momentum/ocelot_g/gt-irq.c | 2 +-
arch/mips/momentum/ocelot_g/setup.c | 3 ---
arch/mips/philips/pnx8550/common/setup.c | 3 ---
arch/mips/philips/pnx8550/common/time.c | 5 ++---
arch/mips/pmc-sierra/yosemite/setup.c | 4 ++--
arch/mips/sgi-ip22/ip22-time.c | 4 +---
arch/mips/sgi-ip27/ip27-init.c | 3 ---
arch/mips/sgi-ip27/ip27-timer.c | 2 +-
arch/mips/sgi-ip32/ip32-setup.c | 4 +---
arch/mips/sibyte/swarm/setup.c | 3 +--
arch/mips/sni/pcimt.c | 1 -
arch/mips/sni/pcit.c | 1 -
arch/mips/sni/rm200.c | 1 -
arch/mips/sni/time.c | 2 +-
arch/mips/tx4927/common/tx4927_setup.c | 5 +----
arch/mips/tx4938/common/setup.c | 4 +---
arch/mips/vr41xx/common/init.c | 8 +-------
include/asm-mips/sni.h | 3 ---
40 files changed, 42 insertions(+), 116 deletions(-)
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index 13fe187..646d7aa 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -50,7 +50,6 @@ extern void au1000_halt(void);
extern void au1000_power_off(void);
extern void au1x_time_init(void);
extern void au1x_timer_setup(struct irqaction *irq);
-extern void au1xxx_time_init(void);
extern void set_cpuspec(void);
void __init plat_mem_setup(void)
@@ -121,7 +120,6 @@ void __init plat_mem_setup(void)
_machine_restart = au1000_restart;
_machine_halt = au1000_halt;
pm_power_off = au1000_power_off;
- board_time_init = au1xxx_time_init;
/* IO/MEM resources. */
set_io_port_base(0);
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index fa1c62f..b32bf46 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -358,7 +358,3 @@ void __init plat_timer_setup(struct irqaction *irq)
#endif
}
-
-void __init au1xxx_time_init(void)
-{
-}
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
index 2f0e4c0..a337e0d 100644
--- a/arch/mips/basler/excite/excite_setup.c
+++ b/arch/mips/basler/excite/excite_setup.c
@@ -67,7 +67,7 @@ DEFINE_SPINLOCK(titan_lock);
int titan_irqflags;
-static void excite_timer_init(void)
+void __init plat_clk_setup(void)
{
const u32 modebit5 = ocd_readl(0x00e4);
unsigned int
@@ -260,9 +260,6 @@ void __init plat_mem_setup(void)
/* Announce RAM to system */
add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
- /* Set up timer initialization hooks */
- board_time_init = excite_timer_init;
-
/* Set up the peripheral address map */
*(boot_ocd_base + (LKB9 / sizeof (u32))) = 0;
*(boot_ocd_base + (LKB10 / sizeof (u32))) = 0;
diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c
index f0cc0e8..94aebbb 100644
--- a/arch/mips/ddb5xxx/ddb5477/setup.c
+++ b/arch/mips/ddb5xxx/ddb5477/setup.c
@@ -121,7 +121,7 @@ static unsigned int __init detect_bus_frequency(unsigned long rtc_base)
return freq;
}
-static void __init ddb_time_init(void)
+void __init plat_clk_setup(void)
{
unsigned long rtc_base;
unsigned int i;
@@ -176,8 +176,6 @@ void __init plat_mem_setup(void)
set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE));
- board_time_init = ddb_time_init;
-
_machine_restart = ddb_machine_restart;
_machine_halt = ddb_machine_halt;
pm_power_off = ddb_machine_power_off;
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index b8a5e75..25b879b 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -146,12 +146,9 @@ static void __init dec_be_init(void)
}
-extern void dec_time_init(void);
-
void __init plat_mem_setup(void)
{
board_be_init = dec_be_init;
- board_time_init = dec_time_init;
wbflush_setup();
diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c
index 8b7e0c1..47d11a2 100644
--- a/arch/mips/dec/time.c
+++ b/arch/mips/dec/time.c
@@ -161,7 +161,7 @@ static cycle_t dec_ioasic_hpt_read(void)
}
-void __init dec_time_init(void)
+void __init plat_clk_setup(void)
{
rtc_mips_get_time = dec_rtc_get_time;
rtc_mips_set_mmss = dec_rtc_set_mmss;
diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c
index b29a447..2cd8c28 100644
--- a/arch/mips/emma2rh/markeins/setup.c
+++ b/arch/mips/emma2rh/markeins/setup.c
@@ -88,7 +88,7 @@ static unsigned int __init detect_bus_frequency(unsigned long rtc_base)
return clock[reg];
}
-static void __init emma2rh_time_init(void)
+void __init plat_clk_setup(void)
{
u32 reg;
if (bus_frequency == 0)
@@ -148,8 +148,6 @@ void __init plat_mem_setup(void)
set_io_port_base(KSEG1ADDR(EMMA2RH_PCI_IO_BASE));
- board_time_init = emma2rh_time_init;
-
_machine_restart = markeins_machine_restart;
_machine_halt = markeins_machine_halt;
pm_power_off = markeins_machine_power_off;
diff --git a/arch/mips/gt64120/wrppmc/setup.c b/arch/mips/gt64120/wrppmc/setup.c
index 121188d..46abb59 100644
--- a/arch/mips/gt64120/wrppmc/setup.c
+++ b/arch/mips/gt64120/wrppmc/setup.c
@@ -125,7 +125,6 @@ static void wrppmc_setup_serial(void)
void __init plat_mem_setup(void)
{
- extern void wrppmc_time_init(void);
extern void wrppmc_machine_restart(char *command);
extern void wrppmc_machine_halt(void);
extern void wrppmc_machine_power_off(void);
@@ -134,9 +133,6 @@ void __init plat_mem_setup(void)
_machine_halt = wrppmc_machine_halt;
pm_power_off = wrppmc_machine_power_off;
- /* Use MIPS Count/Compare Timer */
- board_time_init = wrppmc_time_init;
-
/* This makes the operations of 'in/out[bwl]' to the
* physical address ( < KSEG0) can work via KSEG1
*/
diff --git a/arch/mips/gt64120/wrppmc/time.c b/arch/mips/gt64120/wrppmc/time.c
index 5b44085..dbb8fae 100644
--- a/arch/mips/gt64120/wrppmc/time.c
+++ b/arch/mips/gt64120/wrppmc/time.c
@@ -38,7 +38,7 @@ void __init plat_timer_setup(struct irqaction *irq)
* NOTE: We disable all GT64120 timers, and use MIPS processor internal
* timer as the source of kernel clock tick.
*/
-void __init wrppmc_time_init(void)
+void __init plat_clk_setup(void)
{
/* Disable GT64120 timers */
GT_WRITE(GT_TC_CONTROL_OFS, 0x00);
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c
index 8303001..8c4a988 100644
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ b/arch/mips/jmr3927/rbhma3100/setup.c
@@ -109,7 +109,7 @@ static void jmr3927_timer_ack(void)
jmr3927_tmrptr->tisr = 0; /* ack interrupt */
}
-static void __init jmr3927_time_init(void)
+void __init plat_clk_setup(void)
{
clocksource_mips.read = jmr3927_hpt_read;
mips_timer_ack = jmr3927_timer_ack;
@@ -141,8 +141,6 @@ void __init plat_mem_setup(void)
set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
- board_time_init = jmr3927_time_init;
-
_machine_restart = jmr3927_machine_restart;
_machine_halt = jmr3927_machine_halt;
pm_power_off = jmr3927_machine_power_off;
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 4975da0..6cdd596 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -521,6 +521,18 @@ static void __init resource_init(void)
}
}
+/*
+ * plat_clk_setup() -- optional
+ *
+ * a) set up RTC routines,
+ * b) calibrate and set the mips_hpt_frequency (only needed if
+ * you intended to use cpu counter as timer interrupt source)
+ */
+void __init __weak plat_clk_setup(void)
+{
+ return;
+}
+
void __init setup_arch(char **cmdline_p)
{
cpu_probe();
@@ -549,6 +561,7 @@ void __init setup_arch(char **cmdline_p)
#ifdef CONFIG_SMP
plat_smp_setup();
#endif
+ plat_clk_setup();
}
static int __init fpu_disable(char *s)
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 751b4a1..5a4fd06 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -239,21 +239,14 @@ asmlinkage void ll_local_timer_interrupt(int irq)
/*
* time_init() - it does the following things.
*
- * 1) board_time_init() -
- * a) (optional) set up RTC routines,
- * b) (optional) calibrate and set the mips_hpt_frequency
- * (only needed if you intended to use cpu counter as timer interrupt
- * source)
- * 2) setup xtime based on rtc_mips_get_time().
- * 3) calculate a couple of cached variables for later usage
- * 4) plat_timer_setup() -
+ * 1) setup xtime based on rtc_mips_get_time().
+ * 2) calculate a couple of cached variables for later usage
+ * 3) plat_timer_setup() -
* a) (optional) over-write any choices made above by time_init().
* b) machine specific code should setup the timer irqaction.
* c) enable the timer interrupt
*/
-void (*board_time_init)(void);
-
unsigned int mips_hpt_frequency;
static struct irqaction timer_irqaction = {
@@ -335,9 +328,6 @@ static void __init init_mips_clocksource(void)
void __init time_init(void)
{
- if (board_time_init)
- board_time_init();
-
if (!rtc_mips_set_mmss)
rtc_mips_set_mmss = rtc_mips_set_time;
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
index 488007f..1b3221c 100644
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -109,7 +109,7 @@ static struct notifier_block lasat_panic_block[] =
{ lasat_panic_prom_monitor, NULL, INT_MIN }
};
-static void lasat_time_init(void)
+void __init plat_clk_setup(void)
{
mips_hpt_frequency = lasat_board_info.li_cpu_hz / 2;
}
@@ -164,8 +164,6 @@ void __init plat_mem_setup(void)
lasat_reboot_setup();
- board_time_init = lasat_time_init;
-
#ifdef CONFIG_DS1603
ds1603 = &ds_defs[mips_machtype];
rtc_mips_get_time = ds1603_read;
diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
index 0c6b0ce..cc4057e 100644
--- a/arch/mips/mips-boards/atlas/atlas_setup.c
+++ b/arch/mips/mips-boards/atlas/atlas_setup.c
@@ -34,7 +34,6 @@
#include <asm/traps.h>
extern void mips_reboot_setup(void);
-extern void mips_time_init(void);
extern unsigned long mips_rtc_get_time(void);
#ifdef CONFIG_KGDB
@@ -61,7 +60,6 @@ void __init plat_mem_setup(void)
#endif
mips_reboot_setup();
- board_time_init = mips_time_init;
rtc_mips_get_time = mips_rtc_get_time;
}
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index df2a2bd..d24ffe9 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -249,7 +249,7 @@ unsigned long __init mips_rtc_get_time(void)
return mc146818_get_cmos_time();
}
-void __init mips_time_init(void)
+void __init plat_clk_setup(void)
{
unsigned int est_freq;
diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c
index 7873932..2602131 100644
--- a/arch/mips/mips-boards/malta/malta_setup.c
+++ b/arch/mips/mips-boards/malta/malta_setup.c
@@ -36,7 +36,6 @@
#endif
extern void mips_reboot_setup(void);
-extern void mips_time_init(void);
extern unsigned long mips_rtc_get_time(void);
#ifdef CONFIG_KGDB
@@ -182,6 +181,5 @@ void __init plat_mem_setup(void)
#endif
mips_reboot_setup();
- board_time_init = mips_time_init;
rtc_mips_get_time = mips_rtc_get_time;
}
diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c
index a189dec..ad52e14 100644
--- a/arch/mips/mips-boards/sead/sead_setup.c
+++ b/arch/mips/mips-boards/sead/sead_setup.c
@@ -34,8 +34,6 @@
#include <asm/time.h>
extern void mips_reboot_setup(void);
-extern void mips_time_init(void);
-
static void __init serial_init(void);
const char *get_system_type(void)
@@ -49,8 +47,6 @@ void __init plat_mem_setup(void)
serial_init ();
- board_time_init = mips_time_init;
-
mips_reboot_setup();
}
diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c
index b705f09..58c427a 100644
--- a/arch/mips/mips-boards/sim/sim_setup.c
+++ b/arch/mips/mips-boards/sim/sim_setup.c
@@ -36,7 +36,6 @@
#include <asm/mips-boards/simint.h>
-extern void sim_time_init(void);
static void __init serial_init(void);
unsigned int _isbonito = 0;
@@ -54,7 +53,6 @@ void __init plat_mem_setup(void)
serial_init();
- board_time_init = sim_time_init;
pr_info("Linux started...\n");
#ifdef CONFIG_MIPS_MT_SMP
diff --git a/arch/mips/mips-boards/sim/sim_time.c b/arch/mips/mips-boards/sim/sim_time.c
index d3a21c7..2dcda66 100644
--- a/arch/mips/mips-boards/sim/sim_time.c
+++ b/arch/mips/mips-boards/sim/sim_time.c
@@ -146,7 +146,7 @@ static unsigned int __init estimate_cpu_frequency(void)
return count;
}
-void __init sim_time_init(void)
+void __init plat_clk_setup(void)
{
unsigned int est_freq, flags;
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
index 5a51014..14ed3f5 100644
--- a/arch/mips/momentum/jaguar_atx/setup.c
+++ b/arch/mips/momentum/jaguar_atx/setup.c
@@ -75,8 +75,6 @@ extern void momenco_jaguar_restart(char *command);
extern void momenco_jaguar_halt(void);
extern void momenco_jaguar_power_off(void);
-void momenco_time_init(void);
-
static char reset_reason;
static inline unsigned long ENTRYLO(unsigned long paddr)
@@ -220,7 +218,7 @@ void __init plat_timer_setup(struct irqaction *irq)
* Ugly but the least of all evils. TLB initialization did flush the TLB so
* We need to setup mappings again before we can touch the RTC.
*/
-void momenco_time_init(void)
+void __init plat_clk_setup(void)
{
wire_stupidity_into_tlb();
@@ -360,8 +358,6 @@ void __init plat_mem_setup(void)
{
unsigned int tmpword;
- board_time_init = momenco_time_init;
-
_machine_restart = momenco_jaguar_restart;
_machine_halt = momenco_jaguar_halt;
pm_power_off = momenco_jaguar_power_off;
diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c
index ff0829f..7191dc4 100644
--- a/arch/mips/momentum/ocelot_3/setup.c
+++ b/arch/mips/momentum/ocelot_3/setup.c
@@ -98,7 +98,6 @@ extern void momenco_ocelot_restart(char *command);
extern void momenco_ocelot_halt(void);
extern void momenco_ocelot_power_off(void);
-void momenco_time_init(void);
static char reset_reason;
void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
@@ -201,7 +200,7 @@ void __init plat_timer_setup(struct irqaction *irq)
setup_irq(7, irq); /* Timer interrupt, unmask status IM7 */
}
-void momenco_time_init(void)
+void __init plat_clk_setup(void)
{
setup_wired_tlb_entries();
@@ -315,8 +314,6 @@ void __init plat_mem_setup(void)
{
unsigned int tmpword;
- board_time_init = momenco_time_init;
-
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
pm_power_off = momenco_ocelot_power_off;
diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c
index 0b6b233..8e083c8 100644
--- a/arch/mips/momentum/ocelot_c/setup.c
+++ b/arch/mips/momentum/ocelot_c/setup.c
@@ -76,8 +76,6 @@ extern void momenco_ocelot_restart(char *command);
extern void momenco_ocelot_halt(void);
extern void momenco_ocelot_power_off(void);
-void momenco_time_init(void);
-
static char reset_reason;
void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, unsigned long entryhi, unsigned long pagemask);
@@ -210,7 +208,7 @@ void __init plat_timer_setup(struct irqaction *irq)
setup_irq(7, irq);
}
-void momenco_time_init(void)
+void __init plat_clk_setup(void)
{
#ifdef CONFIG_CPU_SR71000
mips_hpt_frequency = cpu_clock;
@@ -219,7 +217,7 @@ void momenco_time_init(void)
#else
#error Unknown CPU for this board
#endif
- printk("momenco_time_init cpu_clock=%d\n", cpu_clock);
+ printk("%s cpu_clock=%d\n", __FUNCTION__, cpu_clock);
rtc_mips_get_time = m48t37y_get_time;
rtc_mips_set_time = m48t37y_set_time;
@@ -229,8 +227,6 @@ void __init plat_mem_setup(void)
{
unsigned int tmpword;
- board_time_init = momenco_time_init;
-
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
pm_power_off = momenco_ocelot_power_off;
diff --git a/arch/mips/momentum/ocelot_g/gt-irq.c b/arch/mips/momentum/ocelot_g/gt-irq.c
index e5576bd..8b06f4f 100644
--- a/arch/mips/momentum/ocelot_g/gt-irq.c
+++ b/arch/mips/momentum/ocelot_g/gt-irq.c
@@ -156,7 +156,7 @@ static irqreturn_t gt64240_p0int_irq(int irq, void *dev)
* that is passed in as *irq (=irq0 in ../kernel/time.c).
* We will do our own timer interrupt handling.
*/
-void gt64240_time_init(void)
+void plat_clk_setup(void)
{
static struct irqaction timer;
diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c
index 9db638a..b0513cc 100644
--- a/arch/mips/momentum/ocelot_g/setup.c
+++ b/arch/mips/momentum/ocelot_g/setup.c
@@ -75,7 +75,6 @@ extern void momenco_ocelot_restart(char *command);
extern void momenco_ocelot_halt(void);
extern void momenco_ocelot_power_off(void);
-extern void gt64240_time_init(void);
extern void momenco_ocelot_irq_setup(void);
static char reset_reason;
@@ -170,8 +169,6 @@ void __init plat_mem_setup(void)
void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache);
unsigned int tmpword;
- board_time_init = gt64240_time_init;
-
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
pm_power_off = momenco_ocelot_power_off;
diff --git a/arch/mips/philips/pnx8550/common/setup.c b/arch/mips/philips/pnx8550/common/setup.c
index 5bd7374..2ce298f 100644
--- a/arch/mips/philips/pnx8550/common/setup.c
+++ b/arch/mips/philips/pnx8550/common/setup.c
@@ -47,7 +47,6 @@ extern void pnx8550_machine_halt(void);
extern void pnx8550_machine_power_off(void);
extern struct resource ioport_resource;
extern struct resource iomem_resource;
-extern void pnx8550_time_init(void);
extern void rs_kgdb_hook(int tty_no);
extern char *prom_getcmdline(void);
@@ -104,8 +103,6 @@ void __init plat_mem_setup(void)
_machine_halt = pnx8550_machine_halt;
pm_power_off = pnx8550_machine_power_off;
- board_time_init = pnx8550_time_init;
-
/* Clear the Global 2 Register, PCI Inta Output Enable Registers
Bit 1:Enable DAC Powerdown
-> 0:DACs are enabled and are working normally
diff --git a/arch/mips/philips/pnx8550/common/time.c b/arch/mips/philips/pnx8550/common/time.c
index 68def38..0e1ae35 100644
--- a/arch/mips/philips/pnx8550/common/time.c
+++ b/arch/mips/philips/pnx8550/common/time.c
@@ -46,16 +46,15 @@ static void timer_ack(void)
}
/*
- * pnx8550_time_init() - it does the following things:
+ * plat_clk_setup() - it does the following things:
*
- * 1) board_time_init() -
* a) (optional) set up RTC routines,
* b) (optional) calibrate and set the mips_hpt_frequency
* (only needed if you intended to use cpu counter as timer interrupt
* source)
*/
-void pnx8550_time_init(void)
+void __init plat_clk_setup(void)
{
unsigned int n;
unsigned int m;
diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
index 6a6e15e..ceae27c 100644
--- a/arch/mips/pmc-sierra/yosemite/setup.c
+++ b/arch/mips/pmc-sierra/yosemite/setup.c
@@ -137,8 +137,9 @@ void __init plat_timer_setup(struct irqaction *irq)
setup_irq(7, irq);
}
-void yosemite_time_init(void)
+void __init plat_clk_setup(void)
{
+ /* FIXME: what's this code is doing ? */
mips_hpt_frequency = cpu_clock / 2;
mips_hpt_frequency = 33000000 * 3 * 5;
}
@@ -220,7 +221,6 @@ static void __init py_late_time_init(void)
void __init plat_mem_setup(void)
{
- board_time_init = yosemite_time_init;
late_time_init = py_late_time_init;
/* Add memory regions */
diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c
index 8e88a44..202fe80 100644
--- a/arch/mips/sgi-ip22/ip22-time.c
+++ b/arch/mips/sgi-ip22/ip22-time.c
@@ -128,7 +128,7 @@ static unsigned long dosample(void)
/*
* Here we need to calibrate the cycle counter to at least be close.
*/
-static __init void indy_time_init(void)
+void __init plat_clk_setup(void)
{
unsigned long r4k_ticks[3];
unsigned long r4k_tick;
@@ -213,6 +213,4 @@ void __init ip22_time_init(void)
/* setup hookup functions */
rtc_mips_get_time = indy_rtc_get_time;
rtc_mips_set_time = indy_rtc_set_time;
-
- board_time_init = indy_time_init;
}
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 74158d3..8427231 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -191,7 +191,6 @@ static inline void ioc3_eth_init(void)
ioc3->eier = 0;
}
-extern void ip27_time_init(void);
extern void ip27_reboot_setup(void);
void __init plat_mem_setup(void)
@@ -238,6 +237,4 @@ void __init plat_mem_setup(void)
per_cpu_init();
set_io_port_base(IO_BASE);
-
- board_time_init = ip27_time_init;
}
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 8c3c78c..d7740c4 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -223,7 +223,7 @@ static cycle_t ip27_hpt_read(void)
return REMOTE_HUB_L(cputonasid(0), PI_RT_COUNT);
}
-void __init ip27_time_init(void)
+void __init plat_clk_setup(void)
{
clocksource_mips.read = ip27_hpt_read;
mips_hpt_frequency = CYCLES_PER_SEC;
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
index 57708fe..0910b84 100644
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -71,7 +71,7 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
/* An arbitrary time; this can be decreased if reliability looks good */
#define WAIT_MS 10
-void __init ip32_time_init(void)
+void __init plat_clk_setup(void)
{
printk(KERN_INFO "Calibrating system timer... ");
write_c0_count(0);
@@ -94,8 +94,6 @@ void __init plat_mem_setup(void)
rtc_mips_get_time = mc146818_get_cmos_time;
rtc_mips_set_mmss = mc146818_set_rtc_mmss;
- board_time_init = ip32_time_init;
-
#ifdef CONFIG_SERIAL_8250
{
static struct uart_port o2_serial[2];
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 83572d8..93f8d14 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -69,7 +69,7 @@ const char *get_system_type(void)
return "SiByte " SIBYTE_BOARD_NAME;
}
-void __init swarm_time_init(void)
+void __init plat_clk_setup(void)
{
#if defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
/* Setup HPT */
@@ -116,7 +116,6 @@ void __init plat_mem_setup(void)
panic_timeout = 5; /* For debug. */
- board_time_init = swarm_time_init;
board_be_handler = swarm_be_handler;
if (xicor_probe()) {
diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
index 9ee208d..ba04719 100644
--- a/arch/mips/sni/pcimt.c
+++ b/arch/mips/sni/pcimt.c
@@ -280,7 +280,6 @@ void sni_pcimt_init(void)
sni_pcimt_sc_init();
rtc_mips_get_time = mc146818_get_cmos_time;
rtc_mips_set_time = mc146818_set_rtc_mmss;
- board_time_init = sni_cpu_time_init;
ioport_resource.end = sni_io_resource.end;
#ifdef CONFIG_PCI
PCIBIOS_MIN_IO = 0x9000;
diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c
index 00d151f..4d722ae 100644
--- a/arch/mips/sni/pcit.c
+++ b/arch/mips/sni/pcit.c
@@ -247,7 +247,6 @@ void sni_pcit_init(void)
{
rtc_mips_get_time = mc146818_get_cmos_time;
rtc_mips_set_time = mc146818_set_rtc_mmss;
- board_time_init = sni_cpu_time_init;
ioport_resource.end = sni_io_resource.end;
#ifdef CONFIG_PCI
PCIBIOS_MIN_IO = 0x9000;
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
index b82ff12..2421441 100644
--- a/arch/mips/sni/rm200.c
+++ b/arch/mips/sni/rm200.c
@@ -182,5 +182,4 @@ void sni_rm200_init(void)
ioport_resource.end += 0x02000000;
ds1216_base = (volatile unsigned char *) SNI_DS1216_RM200_BASE;
rtc_mips_get_time = ds1216_get_cmos_time;
- board_time_init = sni_cpu_time_init;
}
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index 20028fc..85b4986 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -71,7 +71,7 @@ static __init unsigned long dosample(void)
/*
* Here we need to calibrate the cycle counter to at least be close.
*/
-__init void sni_cpu_time_init(void)
+void __init plat_clk_setup(void)
{
unsigned long r4k_ticks[3];
unsigned long r4k_tick;
diff --git a/arch/mips/tx4927/common/tx4927_setup.c b/arch/mips/tx4927/common/tx4927_setup.c
index c8e49fe..60f594c 100644
--- a/arch/mips/tx4927/common/tx4927_setup.c
+++ b/arch/mips/tx4927/common/tx4927_setup.c
@@ -49,14 +49,11 @@
#undef DEBUG
-void __init tx4927_time_init(void);
void dump_cp0(char *key);
void __init plat_mem_setup(void)
{
- board_time_init = tx4927_time_init;
-
#ifdef CONFIG_TOSHIBA_RBTX4927
{
extern void toshiba_rbtx4927_setup(void);
@@ -65,7 +62,7 @@ void __init plat_mem_setup(void)
#endif
}
-void __init tx4927_time_init(void)
+void __init plat_clk_setup(void)
{
#ifdef CONFIG_TOSHIBA_RBTX4927
diff --git a/arch/mips/tx4938/common/setup.c b/arch/mips/tx4938/common/setup.c
index 142abf4..e7f2dfc 100644
--- a/arch/mips/tx4938/common/setup.c
+++ b/arch/mips/tx4938/common/setup.c
@@ -37,18 +37,16 @@ extern void toshiba_rbtx4938_setup(void);
extern void rbtx4938_time_init(void);
void __init tx4938_setup(void);
-void __init tx4938_time_init(void);
void dump_cp0(char *key);
void __init
plat_mem_setup(void)
{
- board_time_init = tx4938_time_init;
toshiba_rbtx4938_setup();
}
void __init
-tx4938_time_init(void)
+plat_clk_setup(void)
{
rbtx4938_time_init();
}
diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c
index 4f97e0b..14ac696 100644
--- a/arch/mips/vr41xx/common/init.c
+++ b/arch/mips/vr41xx/common/init.c
@@ -36,7 +36,7 @@ static void __init iomem_resource_init(void)
iomem_resource.end = IO_MEM_RESOURCE_END;
}
-static void __init setup_timer_frequency(void)
+void __init plat_clk_setup(void)
{
unsigned long tclock;
@@ -53,16 +53,10 @@ void __init plat_timer_setup(struct irqaction *irq)
setup_irq(TIMER_IRQ, irq);
}
-static void __init timer_init(void)
-{
- board_time_init = setup_timer_frequency;
-}
-
void __init plat_mem_setup(void)
{
vr41xx_calculate_clock_frequency();
- timer_init();
iomem_resource_init();
}
diff --git a/include/asm-mips/sni.h b/include/asm-mips/sni.h
index f257509..5667797 100644
--- a/include/asm-mips/sni.h
+++ b/include/asm-mips/sni.h
@@ -209,9 +209,6 @@ extern void sni_pcit_cplus_irq_init (void);
extern void sni_rm200_irq_init (void);
extern void sni_pcimt_irq_init (void);
-/* timer inits */
-extern void sni_cpu_time_init(void);
-
/* common irq stuff */
extern void (*sni_hwint)(void);
extern struct irqaction sni_isa_irq;
--
1.5.1.3
