RE: pcmcia - failed to initialize IDE interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

To: <linux-mips@xxxxxxxxxxxxxx>
Subject: RE: pcmcia - failed to initialize IDE interface
From: "Aeschbacher, Fabrice" <Fabrice.Aeschbacher@xxxxxxxxxxx>
Date: Fri, 27 Apr 2007 10:42:31 +0200
Cc: <linux-pcmcia@xxxxxxxxxxxxxxxxxxx>, "lkml" <linux-kernel@xxxxxxxxxxxxxxx>
In-reply-to: <D7810733513F4840B4EBAAFA64D9C6A401307A69@xxxxxxxxxxxxxxxxxxxxxxxxxx>
Thread-index: AceHqEmPYMhqH9+RSm+Ie3xgpMcxxgA9vZhwAAIIYDA=
Thread-topic: pcmcia - failed to initialize IDE interface

> Which would be the correct way to make pcmcia_request_irq() 
> use the correct value of 40?

This is in drivers/pcmcia/au1000_db1x00.c:

db1x00_pcmcia_hw_init():

	skt->irq = AU1000_GPIO_8;  /* = 40 */

Now the CF is working fine.

Fabrice

References:
- RE: pcmcia - failed to initialize IDE interface
  - From: Aeschbacher, Fabrice

Prev by Date: RE: pcmcia - failed to initialize IDE interface
Next by Date: spi: Add support for au1550 spi controller
Previous by thread: RE: pcmcia - failed to initialize IDE interface
Next by thread: Re: [MIPS] Fix kunmap_coherent() usage.
Index(es):
- Date
- Thread

[Index of Archives] [Linux MIPS Home] [LKML Archive] [Linux ARM Kernel] [Linux ARM] [Linux] [Git] [Yosemite News] [Linux SCSI] [Linux Hams]

Powered by Linux