Untested as I don't have any IOC3 hardware so if someone could give this
a check that would be great.
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.21-rc6-mm1/drivers/net/ioc3-eth.c linux-2.6.21-rc6-mm1/drivers/net/ioc3-eth.c
--- linux.vanilla-2.6.21-rc6-mm1/drivers/net/ioc3-eth.c 2007-04-12 14:15:04.000000000 +0100
+++ linux-2.6.21-rc6-mm1/drivers/net/ioc3-eth.c 2007-04-23 11:49:32.708000752 +0100
@@ -1103,20 +1103,30 @@
* MiniDINs; all other subdevices are left swinging in the wind, leave
* them disabled.
*/
-static inline int ioc3_is_menet(struct pci_dev *pdev)
+
+static int ioc3_adjacent_is_ioc3(struct pci_dev *pdev, int dev)
+{
+ struct pci_dev *dev = pci_get_bus_and_slot(pdev->bus->number,
+ PCI_DEVFN(dev, 0));
+ int ret = 0;
+
+ if (dev) {
+ if (dev->vendor == PCI_VENDOR_ID_SGI &&
+ dev->device == PCI_DEVICE_ID_SGI_IOC3)
+ ret = 1;
+ pci_dev_put(dev);
+ }
+ return ret;
+}
+
+static int ioc3_is_menet(struct pci_dev *pdev)
{
struct pci_dev *dev;
- return pdev->bus->parent == NULL
- && (dev = pci_find_slot(pdev->bus->number, PCI_DEVFN(0, 0)))
- && dev->vendor == PCI_VENDOR_ID_SGI
- && dev->device == PCI_DEVICE_ID_SGI_IOC3
- && (dev = pci_find_slot(pdev->bus->number, PCI_DEVFN(1, 0)))
- && dev->vendor == PCI_VENDOR_ID_SGI
- && dev->device == PCI_DEVICE_ID_SGI_IOC3
- && (dev = pci_find_slot(pdev->bus->number, PCI_DEVFN(2, 0)))
- && dev->vendor == PCI_VENDOR_ID_SGI
- && dev->device == PCI_DEVICE_ID_SGI_IOC3;
+ return pdev->bus->parent == NULL &&
+ ioc3_adjacent_is_ioc3(pdev, 0) &&
+ ioc3_adjacent_is_ioc3(pdev, 1) &&
+ ioc3_adjacent_is_ioc3(pdev, 2));
}
#ifdef CONFIG_SERIAL_8250
