> On Mon, 26 Feb 2007 17:48:55 -0600 Marc St-Jean <stjeanma@xxxxxxxxxxxxxx> wrote:
> [PATCH] drivers: PMC MSP71xx LED driver
>
> Patch to add LED driver for the PMC-Sierra MSP71xx devices.
>
> This patch references some platform support files previously
> submitted to the linux-mips@xxxxxxxxxxxxxx list.
>
> Thanks,
> @@ -0,0 +1,464 @@
> +/*
> + Special LED-over-TWI-PCA9554 driver for PMC Sierra's Garibaldi
> + (and potentially other) boards
> +
> + Based on pca9539.c Copyright (C) 2005 Ben Gardner <bgardner@xxxxxxxxxx>
> +
> + This program is free software; you can redistribute it and/or modify
> + it under the terms of the GNU General Public License as published by
> + the Free Software Foundation; version 2 of the License.
> +*/
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/kthread.h>
> +#include <linux/i2c.h>
> +
> +#include <msp_led_macros.h>
> +
> +#define POLL_PERIOD msecs_to_jiffies(125) /* Poll at 125ms */
> +
> +/* The externally available "registers" */
> +/* TODO: We must somehow ensure these are in "shared memory" for the other VPE
> + * to access */
> +u32 _msp_led_register[MSP_LED_COUNT];
> +
> +/* Internal polling data */
> +static struct i2c_client *pmctwiled_device[MSP_LED_NUM_DEVICES];
> +static int pmctwiled_running;
> +static struct task_struct *pmctwiled_pollthread;
> +static u32 private_msp_led_register[MSP_LED_COUNT];
> +static u16 current_period;
> +
> +/* Addresses to scan */
> +#define PMCTWILED_BASEADDRESS (0x38)
> +
> +static unsigned short normal_i2c[] = {
> + PMCTWILED_BASEADDRESS + 0,
> + PMCTWILED_BASEADDRESS + 1,
> + PMCTWILED_BASEADDRESS + 2,
> + PMCTWILED_BASEADDRESS + 3,
> + PMCTWILED_BASEADDRESS + 4,
> + I2C_CLIENT_END
> +};
> +
> +/* Insmod parameters */
> +I2C_CLIENT_INSMOD_1(pmctwiled);
> +
> +enum pca9554_cmd {
> + PCA9554_INPUT = 0,
> + PCA9554_OUTPUT = 1,
> + PCA9554_INVERT = 2,
> + PCA9554_DIRECTION = 3,
> +};
> +
> +static int pmctwiled_attach_adapter(struct i2c_adapter *adapter);
> +static int pmctwiled_detect(struct i2c_adapter *adapter, int address, int kind);
> +static int pmctwiled_detach_client(struct i2c_client *client);
> +
> +/* This is the driver that will be inserted */
> +static struct i2c_driver pmctwiled_driver = {
> + .driver = {
> + .name = "pmctwiled",
> + },
> + .attach_adapter = pmctwiled_attach_adapter,
> + .detach_client = pmctwiled_detach_client,
> +};
> +
> +struct pmctwiled_data {
> + struct i2c_client client;
> +};
> +
> +static int pmctwiled_attach_adapter( struct i2c_adapter *adapter )
> +{
> + return i2c_probe(adapter, &addr_data, pmctwiled_detect);
> +}
> +
> +/* This function is called by i2c_probe */
> +static int pmctwiled_detect( struct i2c_adapter *adapter, int address, int kind )
> +{
> + struct i2c_client *new_client = NULL; /* client structure */
> + struct pmctwiled_data *data = NULL; /* local data structure */
> + int err = 0;
> + int devId = address - PMCTWILED_BASEADDRESS;
> +
> + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
> + goto exit;
> +
> + /* OK. For now, we presume we have a valid client. We now create the
> + client structure, even though we cannot fill it completely yet. */
> + if (!(data = kzalloc(sizeof(struct pmctwiled_data), GFP_KERNEL))) {
It is more robust to use kzalloc(sizeof(*data), ...) here.
> + err = -ENOMEM;
> + goto exit;
> + }
> + memset (data, 0x00, sizeof(*data));
As you did here.
This memset is unneeded.
> + new_client = &data->client;
> + i2c_set_clientdata(new_client, data);
> + new_client->addr = address;
> + new_client->adapter = adapter;
> + new_client->driver = &pmctwiled_driver;
> + new_client->flags = 0;
> +
> + /* Detection:
> + * The pca9554 only has 4 registers (0-3).
> + * All other reads should fail
> + */
> + if( i2c_smbus_read_byte_data(new_client, 3) < 0
> + || i2c_smbus_read_byte_data(new_client, 4) >= 0 )
Previous coding style comments apply.
> + goto exit_kfree;
> +
> + /* Found PCA9554 (probably) */
> + strlcpy(new_client->name, "pca9554", I2C_NAME_SIZE);
> + printk( "Detected PCA9554 I/O chip (device %d) at 0x%02x\n",
> + devId, address);
> +
> + /* Tell the I2C layer a new client has arrived */
> + if ((err = i2c_attach_client(new_client)))
> + goto exit_kfree;
> +
> + /* Register this in the list of available devices, and set up the
> + * initial state */
> + i2c_smbus_write_byte_data( new_client, PCA9554_OUTPUT,
> + i2c_smbus_read_byte_data(new_client, PCA9554_INPUT) );
> + i2c_smbus_write_byte_data( new_client, PCA9554_DIRECTION,
> + (u8)mspLedInitialInputState[devId] );
> + pmctwiled_device[devId] = new_client;
> +
> + return 0;
> +
> +exit_kfree:
> + kfree(data);
> +exit:
> + return err;
> +}
> +
> +static int pmctwiled_detach_client( struct i2c_client *client )
> +{
> + int err;
> + int devId = client->addr - PMCTWILED_BASEADDRESS;
> +
> + /* Clear reference so poll thread doesn't use while detaching */
> + pmctwiled_device[devId] = NULL;
> +
> + /* Remove this device from the list of devices */
> + if ((err = i2c_detach_client(client)))
> + return err;
Please avoid compounding operations in this manner. We prefer
err = i2c_detach_client(client);
if (err)
return err;
> + kfree(i2c_get_clientdata(client));
> +
> + return 0;
> +}
>
> ...
>
> +inline void mode_bits_update( u32 *ledRegPtr, msp_led_mode_t mode )
> +{
> + /* TODO: validate mode*/
> + *ledRegPtr |= MSP_LED_MODE_MASK;
> + *ledRegPtr &= (~((u32) MSP_LED_MODE_MASK) | mode);
> +}
Lose the StudlyCaps. led_reg_ptr here.
> +/**
> + * sync_led_timer_with_polling_count - Synchronizes the led timer with polling thread
> + * count
> + * @ledId: Index for the private led register used to obtain timer information
> + * @ledRegPtr: Pointer to the new led register value
> + *
> + * returns 0: If led is in its final period
> + * returns 1: If led is in its initial period
> + *
> + * This function determines if the led timer is in its initial period or the final,
> + * relative to the TWI-polling thread count (current_period) and updates the previous
> + * timer value in the private led register. If the state of the led needs to be
> + * turned off (i.e. when the led has timed out) then the mode bits in the current led
> + * register pointer is set to MSP_LED_OFF and the other data bits are set to 0.
This comment looks awful in an 80-column display.
> + **/
> +inline int sync_led_timer_with_polling_count( int ledId, u32 *ledRegPtr )
This non-static inline function will cause two copies to be generated: one
in the caller in this C file, one for external callers.
It's too large to inline: delete the `inline' keyword.
> +{
> + /* Timer variables */
> + int isInInitialPeriod = 0;
> + u8 timer, ledTimeOut,initialPeriod, finalPeriod;
> + u16 totalPeriod;
No StudlyCaps, please.
> + /* determine the progress into the current cycle, relative to the POLL_PERIOD */
> + initialPeriod = (u8)(*ledRegPtr >> MSP_LED_INITIALPERIOD_SHIFT);
> + finalPeriod = (u8)(*ledRegPtr >> MSP_LED_FINALPERIOD_SHIFT);
> + ledTimeOut = (u8)(*ledRegPtr >> MSP_LED_WATCHDOG_SHIFT);
> + timer = (u8)(private_msp_led_register[ledId] >> MSP_LED_WATCHDOG_SHIFT);
I assume all these (u8) casts are unneeded.
> + totalPeriod = (u16)initialPeriod + (u16)finalPeriod;
And here.
> + if (totalPeriod != 0) {
> + isInInitialPeriod = (current_period % totalPeriod) < initialPeriod;
> + }
> +
> + /* if the ledTimeOut is set, adjust the current state to be either ON or OFF */
> + if (ledTimeOut > 0) {
> + if (timer >= ledTimeOut) {
> + /* set the register to OFF state */
> + mode_bits_update(ledRegPtr,MSP_LED_OFF);
> + timer = 0;
> +
> + /*
> + * TODO:
> + * This introduces a race condition with other thread using
> + * shared memory and must be fixed.
> + */
> + msp_led_turn_off(ledId);
> + }
> + else {
> + timer += 1;
> + }
> + /* update timer */
> + *ledRegPtr &= ~(0xff << MSP_LED_WATCHDOG_SHIFT);
> + *ledRegPtr |= (timer << MSP_LED_WATCHDOG_SHIFT);
> + }
> +
> + return isInInitialPeriod;
> +}
> +
> +/**
> + * led_update - Sets the mode bits of the given led register
> + * @ledId - id pertaining to the led that needs update
> + * @prevDirectionBitsPtr - points to the previous direction bits on the bus
> + * @prevDataBitsPtr - points to the previous data bits on the bus
> + * @currDirectionBitsPtr - points to the new direction bits for bus update
> + * @currDataBitsPtr - points to the new data bits for bus update
> + *
> + * returns 1 - led is in output mode
> + * 0 - led is in input mode and hasn't been updated
> + *
> + * Sets the given mode value to the given led register.
> + **/
> +inline int led_update( int ledId, u8 *prevDirectionBitsPtr, u8 *prevDataBitsPtr,
> + u8 *currDirectionBitsPtr, u8 *currDataBitsPtr )
80-cols.
Remove inline.
> + u32 currLedReg;
> + msp_led_mode_t currMode, prevMode;
> + msp_led_direction_t currDirection, prevDirection;
> + int isInInitialPeriod;
> +
> + /* Read the shared memory into a temporary variable */
> + int pin = ledId % MSP_LED_NUM_DEVICE_PINS;
> + currLedReg = _msp_led_register[ledId];
> +
> + /* Check if the input direction has changed to output */
> + prevDirection = (msp_led_direction_t)
> + ((private_msp_led_register[ledId] & MSP_LED_DIRECTION_MASK) >>
> + MSP_LED_DIRECTION_SHIFT);
> + currDirection = (msp_led_direction_t)
> + ((currLedReg & MSP_LED_DIRECTION_MASK) >>
> + MSP_LED_DIRECTION_SHIFT);
> + if ((prevDirection == MSP_LED_INPUT) && (currDirection != MSP_LED_OUTPUT))
> + return 0;
> +
> + /* get the previous mode of the LED */
> + prevMode = (msp_led_mode_t)(private_msp_led_register[ledId] & MSP_LED_MODE_MASK);
> +
> + if (prevMode == MSP_LED_ON)
> + *prevDataBitsPtr |= (1 << pin);
> +
> + if (prevDirection == MSP_LED_INPUT)
> + *prevDirectionBitsPtr |= (1 << pin);
> +
> +
> + /* Update timer and obtain the current period */
> + isInInitialPeriod = sync_led_timer_with_polling_count(ledId, &currLedReg);
> +
> + /* get the current mode of the LED */
> + currMode = (msp_led_mode_t)(currLedReg & MSP_LED_MODE_MASK);
> +
> + switch (currMode) {
> + case MSP_LED_BLINK:
> + if (isInInitialPeriod) {
> + *currDataBitsPtr |= (1 << pin);
> + mode_bits_update(&currLedReg, MSP_LED_ON);
> + } else {
> + mode_bits_update(&currLedReg,MSP_LED_OFF);
> + }
> + break;
> + case MSP_LED_BLINK_INVERT:
> + if (!isInInitialPeriod) {
> + *currDataBitsPtr |= (1 << pin);
> + mode_bits_update(&currLedReg, MSP_LED_ON);
> + } else {
> + mode_bits_update(&currLedReg,MSP_LED_OFF);
> +
> + }
> + break;
> + case MSP_LED_OFF:
> + /* Assuming that the led be turned off when set to output mode */
> + break;
> + case MSP_LED_ON:
> + *currDataBitsPtr |= (1 << pin);
> + break;
> + }
Indent the switch body one tabstop to the left.
> + if (currDirection == MSP_LED_INPUT)
> + *currDirectionBitsPtr |= (1 << pin);
> +
> + /* save the current mode */
> + private_msp_led_register[ledId] = currLedReg;
> +
> + return 1;
> +}
> +
> +/**
> + * device_update - Updates led device(s) on GPIO
> + * @devId - id pertaining to the device that needs update
> + *
> + * returns 1 - device exists
> + * 0 - device does not exist
> + *
> + * Every pin connected to the GPIO is updated if the state of the pin has changed
> + * from its previous value stored in the memory register. A temporary variable,
> + * currLedReg is used to store the current value of the register corresponding to
> + * the pin under focus. curLedReg gets its value from the global shared memory
> + * registers for leds. This value is compared with the previous value to determine
> + * if a change to the led pin is required. The previous values are stored in the
> + * private led register, private_msp_led_register.
> + *
> + **/
> +inline int device_update( int devId )
Coding-style, StudlyCaps, remove inline
> +{
> + int pin;
> + u8 currDirectionBits, currDataBits, prevDataBits, prevDirectionBits;
> + currDirectionBits = currDataBits = prevDataBits = prevDirectionBits = 0;
The unneeded initialisations here are just to suppress the incorrect gcc
warning, yes?
If so, that should at least be comented. And try to avoid declarations o
this form as well as multiple assignments. So you want:
u8 curr_direction_bits = 0; /* Suppress gcc warning */
u8 curr_data_bits = 0; /* Suppress gcc warning */
u8 prev_data_bits = 0; /* Suppress gcc warning */
u8 prev_direction_bits = 0; /* Suppress gcc warning */
the initialisation does cause extra ode to be generated and we usually just
let te warning come out. I think later gcc's fixed it.
> + /* if the device wasn't detected */
> + if (pmctwiled_device[devId] == NULL)
> + return 0;
> +
> + /* iterate through each pin of the device and update register as necessary */
> + for (pin=0; pin < MSP_LED_NUM_DEVICE_PINS; pin++) {
Put a space either side of '='
> + int ledId = MSP_LED_DEVPIN(devId, pin);
> + led_update(ledId, &prevDirectionBits, &prevDataBits,
> + &currDirectionBits, &currDataBits);
> + }
> +
> + /* BUS OPERATIONS: if the previous state is different from the current state */
> + if (currDataBits != prevDataBits) {
> + i2c_smbus_write_byte_data(
> + pmctwiled_device[devId], PCA9554_OUTPUT,
> + ~(currDataBits) );
> + }
> + if (currDirectionBits != prevDirectionBits) {
> + i2c_smbus_write_byte_data(
> + pmctwiled_device[devId], PCA9554_DIRECTION,
> + currDirectionBits );
> + }
> +
> + return 1;
> +}
> +
> +static int pmctwiled_poll( void *data )
> +{
> + pmctwiled_running = 1;
> + current_period = 0;
> +
> + /* start the polling loop */
> + while( pmctwiled_running ) {
> + /* Starting Time */
> + unsigned long pollEnd;
> + unsigned long timeLeft;
> + unsigned int pollStart = jiffies;
> +
> + /* update every device in here for the current period */
> + int devId;
> + for (devId = 0; devId < MSP_LED_NUM_DEVICES; devId++)
> + device_update(devId);
> +
> + /* Ending Time */
> + pollEnd = jiffies;
> + if (pollEnd >= pollStart) {
> + timeLeft = POLL_PERIOD - (pollEnd - pollStart);
> + } else {
> + timeLeft = POLL_PERIOD - ((0xffffffff - pollStart) + pollEnd);
> + printk( "Warning: Delaying for %lu jiffies. This may not be correct because of clock wrapping\n", timeLeft );
> + }
> + if (timeLeft > POLL_PERIOD) {
> + printk( "Warning: Delay of %lu jiffies requested, defaulting back to %lu\n", timeLeft, POLL_PERIOD );
> + timeLeft = POLL_PERIOD;
> + }
> +
> + /* reshedule next polling interval */
> + set_current_state(TASK_INTERRUPTIBLE);
> + schedule_timeout(timeLeft);
> + current_period++;
> + }
> +
> + return 0;
> +}
Remove pmctwiled_running, use kthread_should_stop()
> +void __init pmctwiled_setup(void)
> +{
> + static int called;
> + int dev;
> +
> + /* check if already initialized */
> + if( called )
> + return;
This cannot happen (can it?)
> + /* initialize LEDs to default state */
> + for( dev = 0; dev < MSP_LED_NUM_DEVICES; dev++ ) {
> + int pin;
> + pmctwiled_device[dev] = NULL;
> +
> + for( pin = 0; pin < 8; pin++ ) {
> + int led = MSP_LED_DEVPIN(dev,pin);
> + if (mspLedInitialInputState[dev] & (1 << pin)) {
> + msp_led_disable(led);
> + } else {
> + msp_led_enable(led);
> + if (mspLedInitialPinState[dev] & (1 << pin))
> + msp_led_turn_on(led);
> + else
> + msp_led_turn_off(led);
> + }
> +
> + /* Initialize the private led register memory */
> + private_msp_led_register[led] = 0;
> + }
> + }
> +
> + /* indicate initialised */
> + called++;
> +}
>
>
> +++ b/include/asm-mips/pmc-sierra/msp71xx/msp_led_macros.h
> @@ -0,0 +1,282 @@
> +/*
> + * $Id: msp_led_macros.h,v 1.3 2006/12/18 18:16:19 stjeanma Exp $
Please remove all CVS IDs from all patches. Once this code hits mainline
they become meaningless.
> +static const u8 mspLedInitialInputState[] = {
> + /* No outputs on device 0 or 1, these are inputs only */
> + MSP_LED_INPUT_MODE, MSP_LED_INPUT_MODE,
> + /* All outputs on device 2 through 4 */
> + MSP_LED_OUTPUT_MODE, MSP_LED_OUTPUT_MODE, MSP_LED_OUTPUT_MODE,
> +};
> +
> +/* For each device, which output pins should start on and off:
> + * One byte per device:
> + * 0 = OFF = HI
> + * 1 = ON = Lo
> + */
> +static const u8 mspLedInitialPinState[] = {
> + 0, 0, /* No initial state, these are input only */
> + (1 << 1), /* PWR_GREEN LED on, all others off */
> + 0, /* All off */
> + 0, /* All off */
> +};
Move these into a .c file.
> +typedef enum {
> + MSP_LED_INPUT = 0,
> + MSP_LED_OUTPUT,
> +} msp_led_direction_t;
No typedefs, please. Convert this to
enum msp_led_direction {
...
};
> +/* Output modes */
> +typedef enum {
> + MSP_LED_OFF = 0, /* Off steady */
> + MSP_LED_ON, /* On steady */
> + MSP_LED_BLINK, /* On for initialPeriod, off for finalPeriod */
> + MSP_LED_BLINK_INVERT, /* Off for initialPeriod, on for finalPeriod */
> +} msp_led_mode_t;
Ditto.
> +/* For non-LED pins, these macros set HI and LO accordingly */
> +#define msp_led_pin_hi msp_led_turn_off
> +#define msp_led_pin_lo msp_led_turn_on
eww.
static inline wrapper functions are preferred. Write code in C, not cpp
where possible.
