No need to stop tc35815 before resetting the board. This fixes the
build of tc35815 as a module. This also means there is no caller of
tc35815_killall left, so remove that function also.
Signed-off-by: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c
index 7ca3d6d..ecabe5b 100644
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ b/arch/mips/jmr3927/rbhma3100/setup.c
@@ -137,10 +137,6 @@ int jmr3927_ccfg_toeon = 0;
static inline void do_reset(void)
{
-#ifdef CONFIG_TC35815
- extern void tc35815_killall(void);
- tc35815_killall();
-#endif
#if 1 /* Resetting PCI bus */
jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 81ed82f..911ff51 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -1703,19 +1703,6 @@ static void tc35815_chip_init(struct net_device *dev)
spin_unlock_irqrestore(&lp->lock, flags);
}
-/* XXX */
-void
-tc35815_killall(void)
-{
- struct net_device *dev;
-
- for (dev = root_tc35815_dev; dev; dev = ((struct tc35815_local *)dev->priv)->next_module) {
- if (dev->flags&IFF_UP){
- dev->stop(dev);
- }
- }
-}
-
static struct pci_driver tc35815_driver = {
.name = TC35815_MODULE_NAME,
.probe = tc35815_probe,
