Here is my second attempt at the serial driver patch for the
PMC-Sierra MSP71xx device.
There are three different fixes:
1. Fix for THRE errata
- I verified the UART_BUG_TXEN fix does not help with this erratum.
- I left our current fix in until I get our platform booting on
2.6.20-rc4 to try the mm tree "8250-uart-backup-timer.patch".
Feel free to ignore for now.
2. Fix for Busy Detect on LCR write
- Moved to new UPIO_DWAPB iotype. Because the new type is a memory
mapped device and there are several tests for UPIO_MEM, this involved
updating serial_core.c and 8250_early.c in addition to 8250.c.
- I tried implementing this totally in serial_in as suggested, but
it can't be done because of bit overlap between UART_IIR_NO_INT and
UART_IIR_BUSY. Also there is no way to set the interrupt "handled = 1"
from serial_in.
3. Workaround for interrupt/data concurrency issue
- Moved to new UPIO_DWAPB iotype.
Thanks,
Marc
Signed-off-by: Marc St-Jean <Marc_St-Jean@xxxxxxxxxxxxxx>
Index: linux_2_6/drivers/serial/8250.c
===================================================================
RCS file: linux_2_6/drivers/serial/8250.c,v
retrieving revision 1.1.1.7
diff -u -r1.1.1.7 8250.c
--- linux_2_6/drivers/serial/8250.c 19 Oct 2006 21:00:58 -0000 1.1.1.7
+++ linux_2_6/drivers/serial/8250.c 24 Jan 2007 23:55:27 -0000
@@ -308,6 +308,7 @@
return inb(up->port.iobase + 1);
case UPIO_MEM:
+ case UPIO_DWAPB:
return readb(up->port.membase + offset);
case UPIO_MEM32:
@@ -333,6 +334,8 @@
static void
serial_out(struct uart_8250_port *up, int offset, int value)
{
+ /* Save the offset before it's remapped */
+ int save_offset = offset;
offset = map_8250_out_reg(up, offset) << up->port.regshift;
switch (up->port.iotype) {
@@ -359,6 +362,19 @@
writeb(value, up->port.membase + offset);
break;
+ case UPIO_DWAPB:
+ /* Save the LCR value so it can be re-written when a
+ * Busy Detect interrupt occurs. */
+ if (save_offset == UART_LCR)
+ up->lcr = value;
+ writeb(value, up->port.membase + offset);
+ /* Read the IER to ensure any interrupt is cleared before
+ * returning from ISR. */
+ if ((save_offset == UART_TX || save_offset == UART_IER) &&
+ in_irq())
+ value = serial_in(up, UART_IER);
+ break;
+
default:
outb(value, up->port.iobase + offset);
}
@@ -1016,6 +1032,17 @@
up->bugs |= UART_BUG_NOMSR;
#endif
+ /* Workaround:
+ * The DesignWare SoC UART part has a bug for all
+ * versions before 3.03a (2005-07-18)
+ * In brief, this is a non-standard 16550 in that the THRE interrupt
+ * will not re-assert itself simply by disabling and re-enabling the
+ * THRI bit in the IER, it is only re-enabled if a character is actually
+ * sent out.
+ */
+ if( up->port.flags & UPF_DW_THRE_BUG )
+ up->bugs |= UART_BUG_DWTHRE;
+
serial_outp(up, UART_LCR, save_lcr);
if (up->capabilities != uart_config[up->port.type].flags) {
@@ -1141,6 +1168,12 @@
iir = serial_in(up, UART_IIR);
if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT)
transmit_chars(up);
+ } else if (up->bugs & UART_BUG_DWTHRE) {
+ unsigned char lsr, iir;
+ lsr = serial_in(up, UART_LSR);
+ iir = serial_in(up, UART_IIR);
+ if (lsr & UART_LSR_THRE)
+ transmit_chars(up);
}
}
@@ -1366,6 +1399,19 @@
handled = 1;
end = NULL;
+ } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY &&
+ up->port.iotype == UPIO_DWAPB) {
+ /* The DesignWare APB UART has an Busy Detect (0x07)
+ * interrupt meaning the LCR was written while the UART
+ * was busy, so the LCR was not actually written. It's
+ * cleared by reading the extended UART status register. */
+ unsigned int status;
+ status = *(volatile u32 *)up->port.user;
+ serial_out(up, UART_LCR, up->lcr);
+
+ handled = 1;
+
+ end = NULL;
} else if (end == NULL)
end = l;
@@ -1950,6 +1996,7 @@
size = 0x100000;
/* fall thru */
case UPIO_MEM:
+ case UPIO_DWAPB:
if (!up->port.mapbase)
break;
@@ -1985,6 +2032,7 @@
size = 0x100000;
/* fall thru */
case UPIO_MEM:
+ case UPIO_DWAPB:
if (!up->port.mapbase)
break;
@@ -2011,6 +2059,7 @@
switch (up->port.iotype) {
case UPIO_MEM:
+ case UPIO_DWAPB:
ret = -EINVAL;
break;
@@ -2032,6 +2081,7 @@
switch (up->port.iotype) {
case UPIO_MEM:
+ case UPIO_DWAPB:
break;
case UPIO_HUB6:
@@ -2352,9 +2402,12 @@
add_preferred_console("ttyS", line, options);
printk("Adding console on ttyS%d at %s 0x%lx (options '%s')\n",
- line, port->iotype == UPIO_MEM ? "MMIO" : "I/O port",
- port->iotype == UPIO_MEM ? (unsigned long) port->mapbase :
- (unsigned long) port->iobase, options);
+ line,
+ (port->iotype == UPIO_MEM || port->iotype == UPIO_DWAPB)
+ ? "MMIO" : "I/O port",
+ (port->iotype == UPIO_MEM || port->iotype == UPIO_DWAPB)
+ ? (unsigned long) port->mapbase : (unsigned long) port->iobase,
+ options);
if (!(serial8250_console.flags & CON_ENABLED)) {
serial8250_console.flags &= ~CON_PRINTBUFFER;
register_console(&serial8250_console);
Index: linux_2_6/drivers/serial/8250.h
===================================================================
RCS file: linux_2_6/drivers/serial/8250.h,v
retrieving revision 1.1.1.6
retrieving revision 1.4
diff -u -r1.1.1.6 -r1.4
--- linux_2_6/drivers/serial/8250.h 19 Oct 2006 21:00:58 -0000 1.1.1.6
+++ linux_2_6/drivers/serial/8250.h 19 Oct 2006 22:08:15 -0000 1.4
@@ -49,6 +49,7 @@
#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */
+#define UART_BUG_DWTHRE (1 << 3) /* UART has buggy DesignWare THRE interrupt re-assertion */
#define PROBE_RSA (1 << 0)
#define PROBE_ANY (~0)
Index: linux_2_6/drivers/serial/8250_early.c
===================================================================
RCS file: linux_2_6/drivers/serial/8250_early.c,v
retrieving revision 1.1.1.3
diff -u -r1.1.1.3 8250_early.c
--- linux_2_6/drivers/serial/8250_early.c 19 Oct 2006 20:08:20 -0000 1.1.1.3
+++ linux_2_6/drivers/serial/8250_early.c 24 Jan 2007 23:55:27 -0000
@@ -46,7 +46,7 @@
static unsigned int __init serial_in(struct uart_port *port, int offset)
{
- if (port->iotype == UPIO_MEM)
+ if (port->iotype == UPIO_MEM || port->iotype == UPIO_DWAPB)
return readb(port->membase + offset);
else
return inb(port->iobase + offset);
@@ -54,7 +54,7 @@
static void __init serial_out(struct uart_port *port, int offset, int value)
{
- if (port->iotype == UPIO_MEM)
+ if (port->iotype == UPIO_MEM || port->iotype == UPIO_DWAPB)
writeb(value, port->membase + offset);
else
outb(value, port->iobase + offset);
@@ -233,7 +233,7 @@
return 0;
/* Try to start the normal driver on a matching line. */
- mmio = (port->iotype == UPIO_MEM);
+ mmio = (port->iotype == UPIO_MEM || port->iotype == UPIO_DWAPB);
line = serial8250_start_console(port, device->options);
if (line < 0)
printk("No ttyS device at %s 0x%lx for console\n",
Index: linux_2_6/drivers/serial/serial_core.c
===================================================================
RCS file: linux_2_6/drivers/serial/serial_core.c,v
retrieving revision 1.1.1.7
diff -u -r1.1.1.7 serial_core.c
--- linux_2_6/drivers/serial/serial_core.c 19 Oct 2006 21:00:58 -0000 1.1.1.7
+++ linux_2_6/drivers/serial/serial_core.c 24 Jan 2007 23:55:28 -0000
@@ -1669,9 +1669,10 @@
ret = sprintf(buf, "%d: uart:%s %s%08lX irq:%d",
port->line, uart_type(port),
- port->iotype == UPIO_MEM ? "mmio:0x" : "port:",
- port->iotype == UPIO_MEM ? port->mapbase :
- (unsigned long) port->iobase,
+ (port->iotype == UPIO_MEM || port->iotype == UPIO_DWAPB)
+ ? "mmio:0x" : "port:",
+ (port->iotype == UPIO_MEM || port->iotype == UPIO_DWAPB)
+ ? port->mapbase : (unsigned long) port->iobase,
port->irq);
if (port->type == PORT_UNKNOWN) {
@@ -2037,6 +2038,7 @@
case UPIO_MEM32:
case UPIO_AU:
case UPIO_TSI:
+ case UPIO_DWAPB:
snprintf(address, sizeof(address),
"MMIO 0x%lx", port->mapbase);
break;
@@ -2380,6 +2382,7 @@
case UPIO_MEM32:
case UPIO_AU:
case UPIO_TSI:
+ case UPIO_DWAPB:
return (port1->mapbase == port2->mapbase);
}
return 0;
Index: linux_2_6/include/linux/serial_core.h
===================================================================
RCS file: linux_2_6/include/linux/serial_core.h,v
retrieving revision 1.1.1.7
diff -u -r1.1.1.7 serial_core.h
--- linux_2_6/include/linux/serial_core.h 19 Oct 2006 21:01:02 -0000 1.1.1.7
+++ linux_2_6/include/linux/serial_core.h 24 Jan 2007 23:55:28 -0000
@@ -228,6 +228,7 @@
#define UPIO_MEM32 (3)
#define UPIO_AU (4) /* Au1x00 type IO */
#define UPIO_TSI (5) /* Tsi108/109 type IO */
+#define UPIO_DWAPB (6) /* DesignWare APB UART */
unsigned int read_status_mask; /* driver specific */
unsigned int ignore_status_mask; /* driver specific */
@@ -258,6 +259,8 @@
#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
#define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
+#define UPF_DW_THRE_BUG ((__force upf_t)(1 << 29)) /* DesignWare THRE hardware BUG
+ * (cannot be autodetected) */
#define UPF_DEAD ((__force upf_t) (1 << 30))
#define UPF_IOREMAP ((__force upf_t) (1 << 31))
@@ -274,6 +277,7 @@
struct device *dev; /* parent device */
unsigned char hub6; /* this should be in the 8250 driver */
unsigned char unused[3];
+ void *user; /* generic platform 'user' pointer */
};
/*
Index: linux_2_6/include/linux/serial_reg.h
===================================================================
RCS file: linux_2_6/include/linux/serial_reg.h,v
retrieving revision 1.1.1.2
diff -u -r1.1.1.2 serial_reg.h
--- linux_2_6/include/linux/serial_reg.h 19 Oct 2006 18:29:50 -0000 1.1.1.2
+++ linux_2_6/include/linux/serial_reg.h 24 Jan 2007 23:55:29 -0000
@@ -218,6 +218,10 @@
#define UART_FCR_PXAR16 0x80 /* receive FIFO treshold = 16 */
#define UART_FCR_PXAR32 0xc0 /* receive FIFO treshold = 32 */
+/*
+ * DesignWare APB UART
+ */
+#define UART_IIR_BUSY 0x07 /* Busy Detect */
