On Sat, Jan 20, 2007 at 11:42:37PM +0000, sathesh babu wrote: > Hi, > I am trying to run Linux-2.6.18.2 ( with preemption enable) kernel on FPGA board which has MIPS24KE processor runs at 12 MHZ. Programmed the timer to give interrupt at every 10msec. > I am seeing some inconsistence behavior during boot up processor. Some times it stops after "NET: Registered protocol family 17" and "VFS: Mounted root (jffs2 filesystem).". > Could some give some pointers why the behavior is random. > Is it OK to program the timer to 10 msec? or should it be more. The overhead of timer interrupts at this low clockrate is significant so I recommend to minimize the timer interrupt rate as far as possible. This is really a tradeoff between latency and overhead and matters much less on hardcores which run at hundreds of MHz. For power sensitive applications lowering the interrupt rate can also help. And that's alredy pretty much what you need to know, that is a 10ms timer is fine. Btw, is this coincidentally on a CoreFPGA 2 or 3 CPU card on a Malta board? Ralf
