On Wednesday 30 August 2006 14:12, Russell King wrote: > iotype is all about the access method used to access the registers of > the device, be it by byte or word, and it also takes account of any > variance in the addressing of the registers. > > It does not refer to features or bugs in any particular implementation. That's what I assumed, too - it seemed obvious. And it seemed equally obvious that it is the port type that encodes the the implementation's peculiarities. Among these are the register offset mapping requirements, so I assumed these should depend on the port type as well. Now Sergei strongly insist that it's the iotype that should be checked whenever to get to the hardware type. I still do not quite understand how that is supposed to work. If I have a PCI device, for example, then the iotype will always be either UPIO_MEM or UPIO_PORT, so how could I learn something about the hardware implementation by looking at these values? Or is the assumption that devices on a standard bus will always be of a standard type? Thomas -- Thomas Koeller, Software Development Basler Vision Technologies An der Strusbek 60-62 22926 Ahrensburg Germany Tel +49 (4102) 463-390 Fax +49 (4102) 463-46390 mailto:thomas.koeller@xxxxxxxxxxxxx http://www.baslerweb.com
