Hello folks,
taken into account what Sergey told me wrt kgdb code for pnx8550, I've made the second attempt to make it work. So, inlined is the patch that only restores the pnx8550 compilation and removes dependency on BROKEN for that target.
I've verified that the target will boot up to mounting the NFS filesystem if this patch is applied.
Signed-off-by: Vitaly Wool <vitalywool@xxxxxxxxx>
arch/mips/Kconfig | 2
arch/mips/philips/pnx8550/common/Makefile | 2
arch/mips/philips/pnx8550/common/int.c | 9 ++-
arch/mips/philips/pnx8550/common/mipsIRQ.S | 76 ++++++++++++++++++++++++++++
arch/mips/philips/pnx8550/common/platform.c | 4 -
arch/mips/philips/pnx8550/common/setup.c | 2
include/asm-mips/mach-pnx8550/uart.h | 14 +++++
7 files changed, 99 insertions(+), 10 deletions(-)
Index: powerpc.git/arch/mips/Kconfig
===================================================================
--- powerpc.git.orig/arch/mips/Kconfig
+++ powerpc.git/arch/mips/Kconfig
@@ -493,13 +493,11 @@ config MIPS_XXS1500
config PNX8550_V2PCI
bool "Philips PNX8550 based Viper2-PCI board"
- depends on BROKEN
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_JBS
bool "Philips PNX8550 based JBS board"
- depends on BROKEN
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
Index: powerpc.git/arch/mips/philips/pnx8550/common/setup.c
===================================================================
--- powerpc.git.orig/arch/mips/philips/pnx8550/common/setup.c
+++ powerpc.git/arch/mips/philips/pnx8550/common/setup.c
@@ -56,7 +56,7 @@ extern char *prom_getcmdline(void);
struct resource standard_io_resources[] = {
{
- .start = .0x00,
+ .start = 0x00,
.end = 0x1f,
.name = "dma1",
.flags = IORESOURCE_BUSY
Index: powerpc.git/arch/mips/philips/pnx8550/common/Makefile
===================================================================
--- powerpc.git.orig/arch/mips/philips/pnx8550/common/Makefile
+++ powerpc.git/arch/mips/philips/pnx8550/common/Makefile
@@ -22,6 +22,6 @@
# under Linux.
#
-obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
+obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o mipsIRQ.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_KGDB) += gdb_hook.o
Index: powerpc.git/arch/mips/philips/pnx8550/common/int.c
===================================================================
--- powerpc.git.orig/arch/mips/philips/pnx8550/common/int.c
+++ powerpc.git/arch/mips/philips/pnx8550/common/int.c
@@ -52,7 +52,9 @@ static char gic_prio[PNX8550_INT_GIC_TOT
1 // 70
};
-static void hw0_irqdispatch(int irq, struct pt_regs *regs)
+extern asmlinkage void cp0_irqdispatch(void);
+
+void hw0_irqdispatch(int irq, struct pt_regs *regs)
{
/* find out which interrupt */
irq = PNX8550_GIC_VECTOR_0 >> 3;
@@ -65,7 +67,7 @@ static void hw0_irqdispatch(int irq, str
}
-static void timer_irqdispatch(int irq, struct pt_regs *regs)
+void timer_irqdispatch(int irq, struct pt_regs *regs)
{
irq = (0x01c0 & read_c0_config7()) >> 6;
@@ -234,6 +236,9 @@ void __init arch_init_irq(void)
int i;
int configPR;
+ /* init of cp0 interrupts */
+ set_except_vector(0, cp0_irqdispatch);
+
for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) {
irq_desc[i].chip = &level_irq_type;
pnx8550_ack(i); /* mask the irq just in case */
Index: powerpc.git/arch/mips/philips/pnx8550/common/mipsIRQ.S
===================================================================
--- /dev/null
+++ powerpc.git/arch/mips/philips/pnx8550/common/mipsIRQ.S
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2002 Philips, Inc. All rights.
+ * Copyright (c) 2002 Red Hat, Inc. All rights.
+ *
+ * This software may be freely redistributed under the terms of the
+ * GNU General Public License.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Based upon arch/mips/galileo-boards/ev64240/int-handler.S
+ *
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * cp0_irqdispatch
+ *
+ * Code to handle in-core interrupt exception.
+ */
+
+ .align 5
+ .set reorder
+ .set noat
+ NESTED(cp0_irqdispatch, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+ mfc0 t0,CP0_CAUSE
+ mfc0 t2,CP0_STATUS
+
+ and t0,t2
+
+ andi t1,t0,STATUSF_IP2 /* int0 hardware line */
+ bnez t1,ll_hw0_irq
+ nop
+
+ andi t1,t0,STATUSF_IP7 /* int5 hardware line */
+ bnez t1,ll_timer_irq
+ nop
+
+ /* wrong alarm or masked ... */
+
+ j spurious_interrupt
+ nop
+ END(cp0_irqdispatch)
+
+ .align 5
+ .set reorder
+ll_hw0_irq:
+ li a0,2
+ move a1,sp
+ jal hw0_irqdispatch
+ nop
+ j ret_from_irq
+ nop
+
+ .align 5
+ .set reorder
+ll_timer_irq:
+ mfc0 t3,CP0_CONFIG,7
+ andi t4,t3,0x01c0
+ beqz t4,ll_timer_out
+ nop
+ li a0,7
+ move a1,sp
+ jal timer_irqdispatch
+ nop
+
+ll_timer_out: j ret_from_irq
+ nop
Index: powerpc.git/arch/mips/philips/pnx8550/common/platform.c
===================================================================
--- powerpc.git.orig/arch/mips/philips/pnx8550/common/platform.c
+++ powerpc.git/arch/mips/philips/pnx8550/common/platform.c
@@ -24,8 +24,6 @@
#include <usb.h>
#include <uart.h>
-extern struct uart_ops ip3106_pops;
-
static struct resource pnx8550_usb_ohci_resources[] = {
[0] = {
.start = PNX8550_USB_OHCI_OP_BASE,
@@ -73,7 +71,6 @@ struct ip3106_port ip3106_ports[] = {
.irq = PNX8550_UART_INT(0),
.uartclk = 3692300,
.fifosize = 16,
- .ops = &ip3106_pops,
.flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
@@ -87,7 +84,6 @@ struct ip3106_port ip3106_ports[] = {
.irq = PNX8550_UART_INT(1),
.uartclk = 3692300,
.fifosize = 16,
- .ops = &ip3106_pops,
.flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
Index: powerpc.git/include/asm-mips/mach-pnx8550/uart.h
===================================================================
--- powerpc.git.orig/include/asm-mips/mach-pnx8550/uart.h
+++ powerpc.git/include/asm-mips/mach-pnx8550/uart.h
@@ -13,4 +13,18 @@
#define PNX8550_UART_INT(x) (PNX8550_INT_GIC_MIN+19+x)
#define IRQ_TO_UART(x) (x-PNX8550_INT_GIC_MIN-19)
+/* early macros needed for prom/kgdb */
+
+#define ip3106_lcr(base,port) *(volatile u32 *)(base+(port*0x1000) + 0x000)
+#define ip3106_mcr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x004)
+#define ip3106_baud(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x008)
+#define ip3106_cfg(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x00C)
+#define ip3106_fifo(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x028)
+#define ip3106_istat(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE0)
+#define ip3106_ien(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE4)
+#define ip3106_iclr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE8)
+#define ip3106_iset(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFEC)
+#define ip3106_pd(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFF4)
+#define ip3106_mid(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFFC)
+
#endif
