Hi Ralf,
This patch has removed unused codes about au1000.
Please apply.
Yoichi
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
diff -pruN -X mips/Documentation/dontdiff mips-orig/arch/mips/au1000/csb250/Makefile mips/arch/mips/au1000/csb250/Makefile
--- mips-orig/arch/mips/au1000/csb250/Makefile 2006-06-28 13:34:58.611275750 +0900
+++ mips/arch/mips/au1000/csb250/Makefile 1970-01-01 09:00:00.000000000 +0900
@@ -1,8 +0,0 @@
-#
-# Copyright 2002 Cogent Computer Systems
-# dan@xxxxxxxxxxxxxxxx
-#
-# Makefile for the Cogent CSB250 Au1500 board. Copied from Pb1500.
-#
-
-obj-y := init.o board_setup.o irqmap.o
diff -pruN -X mips/Documentation/dontdiff mips-orig/arch/mips/au1000/csb250/board_setup.c mips/arch/mips/au1000/csb250/board_setup.c
--- mips-orig/arch/mips/au1000/csb250/board_setup.c 2006-06-28 13:34:58.611275750 +0900
+++ mips/arch/mips/au1000/csb250/board_setup.c 1970-01-01 09:00:00.000000000 +0900
@@ -1,239 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Cogent CSB250 board setup.
- *
- * Copyright 2002 Cogent Computer Systems, Inc.
- * dan@xxxxxxxxxxxxxxxx
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/keyboard.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/au1000.h>
-#include <asm/csb250.h>
-
-extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int csb250_pci_idsel(unsigned int devsel, int assert);
-
-void __init board_setup(void)
-{
- u32 pin_func, pin_val;
- u32 sys_freqctrl, sys_clksrc;
-
-
- // set AUX clock to 12MHz * 8 = 96 MHz
- au_writel(8, SYS_AUXPLL);
- au_writel(0, SYS_PINSTATERD);
- udelay(100);
-
-#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
-
- /* GPIO201 is input for PCMCIA card detect */
- /* GPIO203 is input for PCMCIA interrupt request */
- au_writel(au_readl(GPIO2_DIR) & (u32)(~((1<<1)|(1<<3))), GPIO2_DIR);
-
- /* zero and disable FREQ2 */
- sys_freqctrl = au_readl(SYS_FREQCTRL0);
- sys_freqctrl &= ~0xFFF00000;
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
- /* zero and disable USBH/USBD clocks */
- sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
- au_writel(sys_clksrc, SYS_CLKSRC);
-
- sys_freqctrl = au_readl(SYS_FREQCTRL0);
- sys_freqctrl &= ~0xFFF00000;
-
- sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
-
- // FREQ2 = aux/2 = 48 MHz
- sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
- /*
- * Route 48MHz FREQ2 into USB Host and/or Device
- */
-#ifdef CONFIG_USB_OHCI
- sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-#endif
-#ifdef CONFIG_AU1X00_USB_DEVICE
- sys_clksrc |= ((4<<7) | (0<<6) | (0<<5));
-#endif
- au_writel(sys_clksrc, SYS_CLKSRC);
-
-
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
-#ifndef CONFIG_AU1X00_USB_DEVICE
- // 2nd USB port is USB host
- pin_func |= 0x8000;
-#endif
- au_writel(pin_func, SYS_PINFUNC);
-#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
-
- /* Configure GPIO2....it's used by PCI among other things.
- */
-
- /* Make everything but GP200 (PCI RST) an input until we get
- * the pins set correctly.
- */
- au_writel(0x00000001, GPIO2_DIR);
-
- /* Set the pins used for output.
- * A zero bit will leave PCI reset, LEDs off, power up USB,
- * IDSEL disabled.
- */
- pin_val = ((3 << 30) | (7 << 19) | (1 << 17) | (1 << 16));
- au_writel(pin_val, GPIO2_OUTPUT);
-
- /* Set the output direction.
- */
- pin_val = ((3 << 14) | (7 << 3) | (1 << 1) | (1 << 0));
- au_writel(pin_val, GPIO2_DIR);
-
-#ifdef CONFIG_PCI
- /* Use FREQ1 for the PCI output clock. We use the
- * CPU clock of 384 MHz divided by 12 to get 32 MHz PCI.
- * If Michael changes the CPU speed, we need to adjust
- * that here as well :-).
- */
-
- /* zero and disable FREQ1
- */
- sys_freqctrl = au_readl(SYS_FREQCTRL0);
- sys_freqctrl &= ~0x000ffc00;
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
- /* zero and disable PCI clock
- */
- sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x000f8000;
- au_writel(sys_clksrc, SYS_CLKSRC);
-
- /* Get current values (which really should match above).
- */
- sys_freqctrl = au_readl(SYS_FREQCTRL0);
- sys_freqctrl &= ~0x000ffc00;
-
- sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x000f8000;
-
- /* FREQ1 = cpu/12 = 32 MHz
- */
- sys_freqctrl |= ((5<<12) | (1<<11) | (0<<10));
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
- /* Just connect the clock without further dividing.
- */
- sys_clksrc |= ((3<<17) | (0<<16) | (0<<15));
- au_writel(sys_clksrc, SYS_CLKSRC);
-
- udelay(1);
-
- /* Now that clocks should be running, take PCI out of reset.
- */
- pin_val = au_readl(GPIO2_OUTPUT);
- pin_val |= ((1 << 16) | 1);
- au_writel(pin_val, GPIO2_OUTPUT);
-
- // Setup PCI bus controller
- au_writel(0, Au1500_PCI_CMEM);
- au_writel(0x00003fff, Au1500_CFG_BASE);
-
- /* We run big endian without any of the software byte swapping,
- * so configure the PCI bridge to help us out.
- */
- au_writel(0xf | (2<<6) | (1<<5) | (1<<4), Au1500_PCI_CFG);
-
- au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
- au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
- au_writel(0x02a00356, Au1500_PCI_STATCMD);
- au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
- au_writel(0x00000008, Au1500_PCI_MBAR);
- au_sync();
-
- board_pci_idsel = csb250_pci_idsel;
-#endif
-
- /* Enable sys bus clock divider when IDLE state or no bus activity. */
- au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
-
-#ifdef CONFIG_RTC
- // Enable the RTC if not already enabled
- if (!(au_readl(0xac000028) & 0x20)) {
- printk("enabling clock ...\n");
- au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
- }
- // Put the clock in BCD mode
- if (readl(0xac00002C) & 0x4) { /* reg B */
- au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
- au_sync();
- }
-#endif
-}
-
-/* The IDSEL is selected in the GPIO2 register. We will make device
- * 12 appear in slot 0 and device 13 appear in slot 1.
- */
-int
-csb250_pci_idsel(unsigned int devsel, int assert)
-{
- int retval;
- unsigned int gpio2_pins;
-
- retval = 1;
-
- /* First, disable both selects, then assert the one requested.
- */
- au_writel(0xc000c000, GPIO2_OUTPUT);
- au_sync();
-
- if (assert) {
- if (devsel == 12)
- gpio2_pins = 0x40000000;
- else if (devsel == 13)
- gpio2_pins = 0x80000000;
- else {
- gpio2_pins = 0xc000c000;
- retval = 0;
- }
- au_writel(gpio2_pins, GPIO2_OUTPUT);
- }
- au_sync();
-
- return retval;
-}
diff -pruN -X mips/Documentation/dontdiff mips-orig/arch/mips/au1000/csb250/init.c mips/arch/mips/au1000/csb250/init.c
--- mips-orig/arch/mips/au1000/csb250/init.c 2006-06-28 13:34:58.611275750 +0900
+++ mips/arch/mips/au1000/csb250/init.c 1970-01-01 09:00:00.000000000 +0900
@@ -1,94 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Cogent CSB250 board setup
- *
- * Copyright 2002 Cogent Computer Systems, Inc.
- * dan@xxxxxxxxxxxxxxxx
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-extern void __init prom_init_cmdline(void);
-extern char *prom_getenv(char *envname);
-
-/* When we get initrd working someday.........
-*/
-int my_initrd_start, my_initrd_size;
-
-/* Start arguments and environment.
-*/
-static char *csb_env[2];
-static char *csb_arg[4];
-static char *arg1 = "console=ttyS3,38400";
-static char *arg2 = "root=/dev/nfs rw ip=any";
-static char *env1 = "ethaddr=00:30:23:50:00:00";
-
-const char *get_system_type(void)
-{
- return "Cogent CSB250";
-}
-
-int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- /* We use a0 and a1 to pass initrd start and size.
- */
- if (((uint) argc > 0) && ((uint)argv > 0)) {
- my_initrd_start = (uint)argc;
- my_initrd_size = (uint)argv;
- }
-
- /* First argv is ignored.
- */
- prom_argc = 3;
- prom_argv = csb_arg;
- prom_envp = csb_env;
- csb_arg[1] = arg1;
- csb_arg[2] = arg2;
- csb_env[0] = env1;
-
- mips_machgroup = MACH_GROUP_ALCHEMY;
- mips_machtype = MACH_CSB250;
-
- prom_init_cmdline();
- memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
- memsize = 0x02000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
- add_memory_region(0, memsize, BOOT_MEM_RAM);
- return 0;
-}
diff -pruN -X mips/Documentation/dontdiff mips-orig/arch/mips/au1000/csb250/irqmap.c mips/arch/mips/au1000/csb250/irqmap.c
--- mips-orig/arch/mips/au1000/csb250/irqmap.c 2006-06-28 13:34:58.611275750 +0900
+++ mips/arch/mips/au1000/csb250/irqmap.c 1970-01-01 09:00:00.000000000 +0900
@@ -1,60 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- * dan@xxxxxxxxxxxxxxxx
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/au1000.h>
-
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
-
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
- { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff -pruN -X mips/Documentation/dontdiff mips-orig/arch/mips/au1000/hydrogen3/Makefile mips/arch/mips/au1000/hydrogen3/Makefile
--- mips-orig/arch/mips/au1000/hydrogen3/Makefile 2006-06-28 13:34:58.611275750 +0900
+++ mips/arch/mips/au1000/hydrogen3/Makefile 1970-01-01 09:00:00.000000000 +0900
@@ -1,9 +0,0 @@
-#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@xxxxxxxxxx or source@xxxxxxxxxx
-#
-# Makefile for the Alchemy Semiconductor PB1000 board.
-#
-
-obj-y := init.o board_setup.o irqmap.o
diff -pruN -X mips/Documentation/dontdiff mips-orig/arch/mips/au1000/hydrogen3/board_setup.c mips/arch/mips/au1000/hydrogen3/board_setup.c
--- mips-orig/arch/mips/au1000/hydrogen3/board_setup.c 2006-06-28 13:34:58.611275750 +0900
+++ mips/arch/mips/au1000/hydrogen3/board_setup.c 1970-01-01 09:00:00.000000000 +0900
@@ -1,70 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Alchemy Db1x00 board setup.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@xxxxxxxxxx or source@xxxxxxxxxx
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/keyboard.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/au1000.h>
-
-void board_reset (void)
-{
-}
-
-void __init board_setup(void)
-{
- u32 pin_func;
-
-#ifdef CONFIG_AU1X00_USB_DEVICE
- // 2nd USB port is USB device
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
- au_writel(pin_func, SYS_PINFUNC);
-#endif
-
-#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
- /* set IRFIRSEL instead of GPIO15 */
- pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8));
- au_writel(pin_func, SYS_PINFUNC);
- au_sync();
-#endif
-
- printk("AMD Alchemy Hydrogen3 Board\n");
-}
diff -pruN -X mips/Documentation/dontdiff mips-orig/arch/mips/au1000/hydrogen3/init.c mips/arch/mips/au1000/hydrogen3/init.c
--- mips-orig/arch/mips/au1000/hydrogen3/init.c 2006-06-28 13:34:58.611275750 +0900
+++ mips/arch/mips/au1000/hydrogen3/init.c 1970-01-01 09:00:00.000000000 +0900
@@ -1,76 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * PB1000 board setup
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@xxxxxxxxxx or source@xxxxxxxxxx
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <linux/config.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-extern void __init prom_init_cmdline(void);
-extern char *prom_getenv(char *envname);
-
-const char *get_system_type(void)
-{
-#ifdef CONFIG_MIPS_BOSPORUS
- return "Alchemy Bosporus Gateway Reference";
-#else
- return "Alchemy Db1x00";
-#endif
-}
-
-int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = argc;
- prom_argv = argv;
- prom_envp = envp;
-
- mips_machgroup = MACH_GROUP_ALCHEMY;
- mips_machtype = MACH_DB1000; /* set the platform # */
- prom_init_cmdline();
-
- memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
- memsize = 0x04000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
- add_memory_region(0, memsize, BOOT_MEM_RAM);
- return 0;
-}
diff -pruN -X mips/Documentation/dontdiff mips-orig/arch/mips/au1000/hydrogen3/irqmap.c mips/arch/mips/au1000/hydrogen3/irqmap.c
--- mips-orig/arch/mips/au1000/hydrogen3/irqmap.c 2006-06-28 13:34:58.611275750 +0900
+++ mips/arch/mips/au1000/hydrogen3/irqmap.c 1970-01-01 09:00:00.000000000 +0900
@@ -1,56 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- * dan@xxxxxxxxxxxxxxxx
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/au1000.h>
-
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
-
- /* { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, */
- { AU1000_GPIO_21, INTC_INT_LOW_LEVEL, 0 },
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
