Revised for current git tree.
The setup_sigcontect()/restore_sigcontext() might sleep on
put_user()/get_user() with preemption disabled (i.e. atomic context).
Sleeping in atomic context is not allowed. This patch fixes this
problem by rewriting restore_fp_context()/save_fp_context().
A path to save fp context was:
(current.thread.fpu -> ) real FPU -> sigcontext on userstack
And with this patch it is:
(real FPU -> ) current.thread.fpu -> sigcontext on userstack
While transfer between real FPU and current.thread.fpu can be done by
usual context save/restore routines, all arch/mips/kernel/*_fpu.S,
SMP-variant of {save,restore}_fp_context and SC_ symbols in
asm-offset.h can be removed.
Signed-off-by: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
arch/mips/kernel/r2300_fpu.S | 126 ----------------------
arch/mips/kernel/r4k_fpu.S | 188 ----------------------------------
arch/mips/kernel/r6000_fpu.S | 87 ---------------
b/arch/mips/kernel/Makefile | 36 +++---
b/arch/mips/kernel/asm-offsets.c | 47 --------
b/arch/mips/kernel/signal-common.h | 54 +++++++--
b/arch/mips/kernel/signal32.c | 52 +++++++--
b/arch/mips/kernel/traps.c | 76 -------------
b/arch/mips/math-emu/kernel_linkage.c | 69 ------------
b/include/asm-mips/fpu.h | 9 -
10 files changed, 100 insertions(+), 644 deletions(-)
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 881c467..1da1ebb 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -15,24 +15,24 @@ obj-$(CONFIG_MODULES) += mips_ksyms.o m
obj-$(CONFIG_APM) += apm.o
-obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o
-obj-$(CONFIG_CPU_TX39XX) += r2300_fpu.o r2300_switch.o
-obj-$(CONFIG_CPU_TX49XX) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_R4000) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_VR41XX) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_R4300) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_R5432) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_R8000) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_RM7000) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_RM9000) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_NEVADA) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_R10000) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_SB1) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_R3000) += r2300_switch.o
+obj-$(CONFIG_CPU_TX39XX) += r2300_switch.o
+obj-$(CONFIG_CPU_TX49XX) += r4k_switch.o
+obj-$(CONFIG_CPU_R4000) += r4k_switch.o
+obj-$(CONFIG_CPU_VR41XX) += r4k_switch.o
+obj-$(CONFIG_CPU_R4300) += r4k_switch.o
+obj-$(CONFIG_CPU_R4X00) += r4k_switch.o
+obj-$(CONFIG_CPU_R5000) += r4k_switch.o
+obj-$(CONFIG_CPU_R5432) += r4k_switch.o
+obj-$(CONFIG_CPU_R8000) += r4k_switch.o
+obj-$(CONFIG_CPU_RM7000) += r4k_switch.o
+obj-$(CONFIG_CPU_RM9000) += r4k_switch.o
+obj-$(CONFIG_CPU_NEVADA) += r4k_switch.o
+obj-$(CONFIG_CPU_R10000) += r4k_switch.o
+obj-$(CONFIG_CPU_SB1) += r4k_switch.o
+obj-$(CONFIG_CPU_MIPS32) += r4k_switch.o
+obj-$(CONFIG_CPU_MIPS64) += r4k_switch.o
+obj-$(CONFIG_CPU_R6000) += r4k_switch.o
obj-$(CONFIG_SMP) += smp.o
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index f1bb6a2..c1762ea 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -244,53 +244,6 @@ void output_mm_defines(void)
linefeed;
}
-#ifdef CONFIG_32BIT
-void output_sc_defines(void)
-{
- text("/* Linux sigcontext offsets. */");
- offset("#define SC_REGS ", struct sigcontext, sc_regs);
- offset("#define SC_FPREGS ", struct sigcontext, sc_fpregs);
- offset("#define SC_MDHI ", struct sigcontext, sc_mdhi);
- offset("#define SC_MDLO ", struct sigcontext, sc_mdlo);
- offset("#define SC_PC ", struct sigcontext, sc_pc);
- offset("#define SC_STATUS ", struct sigcontext, sc_status);
- offset("#define SC_FPC_CSR ", struct sigcontext, sc_fpc_csr);
- offset("#define SC_FPC_EIR ", struct sigcontext, sc_fpc_eir);
- offset("#define SC_HI1 ", struct sigcontext, sc_hi1);
- offset("#define SC_LO1 ", struct sigcontext, sc_lo1);
- offset("#define SC_HI2 ", struct sigcontext, sc_hi2);
- offset("#define SC_LO2 ", struct sigcontext, sc_lo2);
- offset("#define SC_HI3 ", struct sigcontext, sc_hi3);
- offset("#define SC_LO3 ", struct sigcontext, sc_lo3);
- linefeed;
-}
-#endif
-
-#ifdef CONFIG_64BIT
-void output_sc_defines(void)
-{
- text("/* Linux sigcontext offsets. */");
- offset("#define SC_REGS ", struct sigcontext, sc_regs);
- offset("#define SC_FPREGS ", struct sigcontext, sc_fpregs);
- offset("#define SC_MDHI ", struct sigcontext, sc_mdhi);
- offset("#define SC_MDLO ", struct sigcontext, sc_mdlo);
- offset("#define SC_PC ", struct sigcontext, sc_pc);
- offset("#define SC_FPC_CSR ", struct sigcontext, sc_fpc_csr);
- linefeed;
-}
-#endif
-
-#ifdef CONFIG_MIPS32_COMPAT
-void output_sc32_defines(void)
-{
- text("/* Linux 32-bit sigcontext offsets. */");
- offset("#define SC32_FPREGS ", struct sigcontext32, sc_fpregs);
- offset("#define SC32_FPC_CSR ", struct sigcontext32, sc_fpc_csr);
- offset("#define SC32_FPC_EIR ", struct sigcontext32, sc_fpc_eir);
- linefeed;
-}
-#endif
-
void output_signal_defined(void)
{
text("/* Linux signal numbers. */");
diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S
deleted file mode 100644
index ac68e68..0000000
--- a/arch/mips/kernel/r2300_fpu.S
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1996, 1998 by Ralf Baechle
- *
- * Multi-arch abstraction and asm macros for easier reading:
- * Copyright (C) 1996 David S. Miller (dm@xxxxxxxxxxxx)
- *
- * Further modifications to make this work:
- * Copyright (c) 1998 Harald Koerfgen
- */
-#include <asm/asm.h>
-#include <asm/errno.h>
-#include <asm/fpregdef.h>
-#include <asm/mipsregs.h>
-#include <asm/asm-offsets.h>
-#include <asm/regdef.h>
-
-#define EX(a,b) \
-9: a,##b; \
- .section __ex_table,"a"; \
- PTR 9b,bad_stack; \
- .previous
-
- .set noreorder
- .set mips1
- /* Save floating point context */
-LEAF(_save_fp_context)
- li v0, 0 # assume success
- cfc1 t1,fcr31
- EX(swc1 $f0,(SC_FPREGS+0)(a0))
- EX(swc1 $f1,(SC_FPREGS+8)(a0))
- EX(swc1 $f2,(SC_FPREGS+16)(a0))
- EX(swc1 $f3,(SC_FPREGS+24)(a0))
- EX(swc1 $f4,(SC_FPREGS+32)(a0))
- EX(swc1 $f5,(SC_FPREGS+40)(a0))
- EX(swc1 $f6,(SC_FPREGS+48)(a0))
- EX(swc1 $f7,(SC_FPREGS+56)(a0))
- EX(swc1 $f8,(SC_FPREGS+64)(a0))
- EX(swc1 $f9,(SC_FPREGS+72)(a0))
- EX(swc1 $f10,(SC_FPREGS+80)(a0))
- EX(swc1 $f11,(SC_FPREGS+88)(a0))
- EX(swc1 $f12,(SC_FPREGS+96)(a0))
- EX(swc1 $f13,(SC_FPREGS+104)(a0))
- EX(swc1 $f14,(SC_FPREGS+112)(a0))
- EX(swc1 $f15,(SC_FPREGS+120)(a0))
- EX(swc1 $f16,(SC_FPREGS+128)(a0))
- EX(swc1 $f17,(SC_FPREGS+136)(a0))
- EX(swc1 $f18,(SC_FPREGS+144)(a0))
- EX(swc1 $f19,(SC_FPREGS+152)(a0))
- EX(swc1 $f20,(SC_FPREGS+160)(a0))
- EX(swc1 $f21,(SC_FPREGS+168)(a0))
- EX(swc1 $f22,(SC_FPREGS+176)(a0))
- EX(swc1 $f23,(SC_FPREGS+184)(a0))
- EX(swc1 $f24,(SC_FPREGS+192)(a0))
- EX(swc1 $f25,(SC_FPREGS+200)(a0))
- EX(swc1 $f26,(SC_FPREGS+208)(a0))
- EX(swc1 $f27,(SC_FPREGS+216)(a0))
- EX(swc1 $f28,(SC_FPREGS+224)(a0))
- EX(swc1 $f29,(SC_FPREGS+232)(a0))
- EX(swc1 $f30,(SC_FPREGS+240)(a0))
- EX(swc1 $f31,(SC_FPREGS+248)(a0))
- EX(sw t1,(SC_FPC_CSR)(a0))
- cfc1 t0,$0 # implementation/version
- jr ra
- .set nomacro
- EX(sw t0,(SC_FPC_EIR)(a0))
- .set macro
- END(_save_fp_context)
-
-/*
- * Restore FPU state:
- * - fp gp registers
- * - cp1 status/control register
- *
- * We base the decision which registers to restore from the signal stack
- * frame on the current content of c0_status, not on the content of the
- * stack frame which might have been changed by the user.
- */
-LEAF(_restore_fp_context)
- li v0, 0 # assume success
- EX(lw t0,(SC_FPC_CSR)(a0))
- EX(lwc1 $f0,(SC_FPREGS+0)(a0))
- EX(lwc1 $f1,(SC_FPREGS+8)(a0))
- EX(lwc1 $f2,(SC_FPREGS+16)(a0))
- EX(lwc1 $f3,(SC_FPREGS+24)(a0))
- EX(lwc1 $f4,(SC_FPREGS+32)(a0))
- EX(lwc1 $f5,(SC_FPREGS+40)(a0))
- EX(lwc1 $f6,(SC_FPREGS+48)(a0))
- EX(lwc1 $f7,(SC_FPREGS+56)(a0))
- EX(lwc1 $f8,(SC_FPREGS+64)(a0))
- EX(lwc1 $f9,(SC_FPREGS+72)(a0))
- EX(lwc1 $f10,(SC_FPREGS+80)(a0))
- EX(lwc1 $f11,(SC_FPREGS+88)(a0))
- EX(lwc1 $f12,(SC_FPREGS+96)(a0))
- EX(lwc1 $f13,(SC_FPREGS+104)(a0))
- EX(lwc1 $f14,(SC_FPREGS+112)(a0))
- EX(lwc1 $f15,(SC_FPREGS+120)(a0))
- EX(lwc1 $f16,(SC_FPREGS+128)(a0))
- EX(lwc1 $f17,(SC_FPREGS+136)(a0))
- EX(lwc1 $f18,(SC_FPREGS+144)(a0))
- EX(lwc1 $f19,(SC_FPREGS+152)(a0))
- EX(lwc1 $f20,(SC_FPREGS+160)(a0))
- EX(lwc1 $f21,(SC_FPREGS+168)(a0))
- EX(lwc1 $f22,(SC_FPREGS+176)(a0))
- EX(lwc1 $f23,(SC_FPREGS+184)(a0))
- EX(lwc1 $f24,(SC_FPREGS+192)(a0))
- EX(lwc1 $f25,(SC_FPREGS+200)(a0))
- EX(lwc1 $f26,(SC_FPREGS+208)(a0))
- EX(lwc1 $f27,(SC_FPREGS+216)(a0))
- EX(lwc1 $f28,(SC_FPREGS+224)(a0))
- EX(lwc1 $f29,(SC_FPREGS+232)(a0))
- EX(lwc1 $f30,(SC_FPREGS+240)(a0))
- EX(lwc1 $f31,(SC_FPREGS+248)(a0))
- jr ra
- ctc1 t0,fcr31
- END(_restore_fp_context)
- .set reorder
-
- .type fault@function
- .ent fault
-fault: li v0, -EFAULT
- jr ra
- .end fault
diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S
deleted file mode 100644
index 283a985..0000000
--- a/arch/mips/kernel/r4k_fpu.S
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1996, 98, 99, 2000, 01 Ralf Baechle
- *
- * Multi-arch abstraction and asm macros for easier reading:
- * Copyright (C) 1996 David S. Miller (dm@xxxxxxxxxxxx)
- *
- * Carsten Langgaard, carstenl@xxxxxxxx
- * Copyright (C) 2000 MIPS Technologies, Inc.
- * Copyright (C) 1999, 2001 Silicon Graphics, Inc.
- */
-#include <linux/config.h>
-#include <asm/asm.h>
-#include <asm/errno.h>
-#include <asm/fpregdef.h>
-#include <asm/mipsregs.h>
-#include <asm/asm-offsets.h>
-#include <asm/regdef.h>
-
- .macro EX insn, reg, src
- .set push
- .set nomacro
-.ex\@: \insn \reg, \src
- .set pop
- .section __ex_table,"a"
- PTR .ex\@, fault
- .previous
- .endm
-
- .set noreorder
- .set mips3
-
-LEAF(_save_fp_context)
- cfc1 t1, fcr31
-
-#ifdef CONFIG_64BIT
- /* Store the 16 odd double precision registers */
- EX sdc1 $f1, SC_FPREGS+8(a0)
- EX sdc1 $f3, SC_FPREGS+24(a0)
- EX sdc1 $f5, SC_FPREGS+40(a0)
- EX sdc1 $f7, SC_FPREGS+56(a0)
- EX sdc1 $f9, SC_FPREGS+72(a0)
- EX sdc1 $f11, SC_FPREGS+88(a0)
- EX sdc1 $f13, SC_FPREGS+104(a0)
- EX sdc1 $f15, SC_FPREGS+120(a0)
- EX sdc1 $f17, SC_FPREGS+136(a0)
- EX sdc1 $f19, SC_FPREGS+152(a0)
- EX sdc1 $f21, SC_FPREGS+168(a0)
- EX sdc1 $f23, SC_FPREGS+184(a0)
- EX sdc1 $f25, SC_FPREGS+200(a0)
- EX sdc1 $f27, SC_FPREGS+216(a0)
- EX sdc1 $f29, SC_FPREGS+232(a0)
- EX sdc1 $f31, SC_FPREGS+248(a0)
-#endif
-
- /* Store the 16 even double precision registers */
- EX sdc1 $f0, SC_FPREGS+0(a0)
- EX sdc1 $f2, SC_FPREGS+16(a0)
- EX sdc1 $f4, SC_FPREGS+32(a0)
- EX sdc1 $f6, SC_FPREGS+48(a0)
- EX sdc1 $f8, SC_FPREGS+64(a0)
- EX sdc1 $f10, SC_FPREGS+80(a0)
- EX sdc1 $f12, SC_FPREGS+96(a0)
- EX sdc1 $f14, SC_FPREGS+112(a0)
- EX sdc1 $f16, SC_FPREGS+128(a0)
- EX sdc1 $f18, SC_FPREGS+144(a0)
- EX sdc1 $f20, SC_FPREGS+160(a0)
- EX sdc1 $f22, SC_FPREGS+176(a0)
- EX sdc1 $f24, SC_FPREGS+192(a0)
- EX sdc1 $f26, SC_FPREGS+208(a0)
- EX sdc1 $f28, SC_FPREGS+224(a0)
- EX sdc1 $f30, SC_FPREGS+240(a0)
- EX sw t1, SC_FPC_CSR(a0)
- jr ra
- li v0, 0 # success
- END(_save_fp_context)
-
-#ifdef CONFIG_MIPS32_COMPAT
- /* Save 32-bit process floating point context */
-LEAF(_save_fp_context32)
- cfc1 t1, fcr31
-
- EX sdc1 $f0, SC32_FPREGS+0(a0)
- EX sdc1 $f2, SC32_FPREGS+16(a0)
- EX sdc1 $f4, SC32_FPREGS+32(a0)
- EX sdc1 $f6, SC32_FPREGS+48(a0)
- EX sdc1 $f8, SC32_FPREGS+64(a0)
- EX sdc1 $f10, SC32_FPREGS+80(a0)
- EX sdc1 $f12, SC32_FPREGS+96(a0)
- EX sdc1 $f14, SC32_FPREGS+112(a0)
- EX sdc1 $f16, SC32_FPREGS+128(a0)
- EX sdc1 $f18, SC32_FPREGS+144(a0)
- EX sdc1 $f20, SC32_FPREGS+160(a0)
- EX sdc1 $f22, SC32_FPREGS+176(a0)
- EX sdc1 $f24, SC32_FPREGS+192(a0)
- EX sdc1 $f26, SC32_FPREGS+208(a0)
- EX sdc1 $f28, SC32_FPREGS+224(a0)
- EX sdc1 $f30, SC32_FPREGS+240(a0)
- EX sw t1, SC32_FPC_CSR(a0)
- cfc1 t0, $0 # implementation/version
- EX sw t0, SC32_FPC_EIR(a0)
-
- jr ra
- li v0, 0 # success
- END(_save_fp_context32)
-#endif
-
-/*
- * Restore FPU state:
- * - fp gp registers
- * - cp1 status/control register
- */
-LEAF(_restore_fp_context)
- EX lw t0, SC_FPC_CSR(a0)
-#ifdef CONFIG_64BIT
- EX ldc1 $f1, SC_FPREGS+8(a0)
- EX ldc1 $f3, SC_FPREGS+24(a0)
- EX ldc1 $f5, SC_FPREGS+40(a0)
- EX ldc1 $f7, SC_FPREGS+56(a0)
- EX ldc1 $f9, SC_FPREGS+72(a0)
- EX ldc1 $f11, SC_FPREGS+88(a0)
- EX ldc1 $f13, SC_FPREGS+104(a0)
- EX ldc1 $f15, SC_FPREGS+120(a0)
- EX ldc1 $f17, SC_FPREGS+136(a0)
- EX ldc1 $f19, SC_FPREGS+152(a0)
- EX ldc1 $f21, SC_FPREGS+168(a0)
- EX ldc1 $f23, SC_FPREGS+184(a0)
- EX ldc1 $f25, SC_FPREGS+200(a0)
- EX ldc1 $f27, SC_FPREGS+216(a0)
- EX ldc1 $f29, SC_FPREGS+232(a0)
- EX ldc1 $f31, SC_FPREGS+248(a0)
-#endif
- EX ldc1 $f0, SC_FPREGS+0(a0)
- EX ldc1 $f2, SC_FPREGS+16(a0)
- EX ldc1 $f4, SC_FPREGS+32(a0)
- EX ldc1 $f6, SC_FPREGS+48(a0)
- EX ldc1 $f8, SC_FPREGS+64(a0)
- EX ldc1 $f10, SC_FPREGS+80(a0)
- EX ldc1 $f12, SC_FPREGS+96(a0)
- EX ldc1 $f14, SC_FPREGS+112(a0)
- EX ldc1 $f16, SC_FPREGS+128(a0)
- EX ldc1 $f18, SC_FPREGS+144(a0)
- EX ldc1 $f20, SC_FPREGS+160(a0)
- EX ldc1 $f22, SC_FPREGS+176(a0)
- EX ldc1 $f24, SC_FPREGS+192(a0)
- EX ldc1 $f26, SC_FPREGS+208(a0)
- EX ldc1 $f28, SC_FPREGS+224(a0)
- EX ldc1 $f30, SC_FPREGS+240(a0)
- ctc1 t0, fcr31
- jr ra
- li v0, 0 # success
- END(_restore_fp_context)
-
-#ifdef CONFIG_MIPS32_COMPAT
-LEAF(_restore_fp_context32)
- /* Restore an o32 sigcontext. */
- EX lw t0, SC32_FPC_CSR(a0)
- EX ldc1 $f0, SC32_FPREGS+0(a0)
- EX ldc1 $f2, SC32_FPREGS+16(a0)
- EX ldc1 $f4, SC32_FPREGS+32(a0)
- EX ldc1 $f6, SC32_FPREGS+48(a0)
- EX ldc1 $f8, SC32_FPREGS+64(a0)
- EX ldc1 $f10, SC32_FPREGS+80(a0)
- EX ldc1 $f12, SC32_FPREGS+96(a0)
- EX ldc1 $f14, SC32_FPREGS+112(a0)
- EX ldc1 $f16, SC32_FPREGS+128(a0)
- EX ldc1 $f18, SC32_FPREGS+144(a0)
- EX ldc1 $f20, SC32_FPREGS+160(a0)
- EX ldc1 $f22, SC32_FPREGS+176(a0)
- EX ldc1 $f24, SC32_FPREGS+192(a0)
- EX ldc1 $f26, SC32_FPREGS+208(a0)
- EX ldc1 $f28, SC32_FPREGS+224(a0)
- EX ldc1 $f30, SC32_FPREGS+240(a0)
- ctc1 t0, fcr31
- jr ra
- li v0, 0 # success
- END(_restore_fp_context32)
- .set reorder
-#endif
-
- .type fault@function
- .ent fault
-fault: li v0, -EFAULT # failure
- jr ra
- .end fault
diff --git a/arch/mips/kernel/r6000_fpu.S b/arch/mips/kernel/r6000_fpu.S
deleted file mode 100644
index 43cda53..0000000
--- a/arch/mips/kernel/r6000_fpu.S
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * r6000_fpu.S: Save/restore floating point context for signal handlers.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1996 by Ralf Baechle
- *
- * Multi-arch abstraction and asm macros for easier reading:
- * Copyright (C) 1996 David S. Miller (dm@xxxxxxxxxxxx)
- */
-#include <asm/asm.h>
-#include <asm/fpregdef.h>
-#include <asm/mipsregs.h>
-#include <asm/asm-offsets.h>
-#include <asm/regdef.h>
-
- .set noreorder
- .set mips2
- /* Save floating point context */
- LEAF(_save_fp_context)
- mfc0 t0,CP0_STATUS
- sll t0,t0,2
- bgez t0,1f
- nop
-
- cfc1 t1,fcr31
- /* Store the 16 double precision registers */
- sdc1 $f0,(SC_FPREGS+0)(a0)
- sdc1 $f2,(SC_FPREGS+16)(a0)
- sdc1 $f4,(SC_FPREGS+32)(a0)
- sdc1 $f6,(SC_FPREGS+48)(a0)
- sdc1 $f8,(SC_FPREGS+64)(a0)
- sdc1 $f10,(SC_FPREGS+80)(a0)
- sdc1 $f12,(SC_FPREGS+96)(a0)
- sdc1 $f14,(SC_FPREGS+112)(a0)
- sdc1 $f16,(SC_FPREGS+128)(a0)
- sdc1 $f18,(SC_FPREGS+144)(a0)
- sdc1 $f20,(SC_FPREGS+160)(a0)
- sdc1 $f22,(SC_FPREGS+176)(a0)
- sdc1 $f24,(SC_FPREGS+192)(a0)
- sdc1 $f26,(SC_FPREGS+208)(a0)
- sdc1 $f28,(SC_FPREGS+224)(a0)
- sdc1 $f30,(SC_FPREGS+240)(a0)
- jr ra
- sw t0,SC_FPC_CSR(a0)
-1: jr ra
- nop
- END(_save_fp_context)
-
-/* Restore FPU state:
- * - fp gp registers
- * - cp1 status/control register
- *
- * We base the decision which registers to restore from the signal stack
- * frame on the current content of c0_status, not on the content of the
- * stack frame which might have been changed by the user.
- */
- LEAF(_restore_fp_context)
- mfc0 t0,CP0_STATUS
- sll t0,t0,2
-
- bgez t0,1f
- lw t0,SC_FPC_CSR(a0)
- /* Restore the 16 double precision registers */
- ldc1 $f0,(SC_FPREGS+0)(a0)
- ldc1 $f2,(SC_FPREGS+16)(a0)
- ldc1 $f4,(SC_FPREGS+32)(a0)
- ldc1 $f6,(SC_FPREGS+48)(a0)
- ldc1 $f8,(SC_FPREGS+64)(a0)
- ldc1 $f10,(SC_FPREGS+80)(a0)
- ldc1 $f12,(SC_FPREGS+96)(a0)
- ldc1 $f14,(SC_FPREGS+112)(a0)
- ldc1 $f16,(SC_FPREGS+128)(a0)
- ldc1 $f18,(SC_FPREGS+144)(a0)
- ldc1 $f20,(SC_FPREGS+160)(a0)
- ldc1 $f22,(SC_FPREGS+176)(a0)
- ldc1 $f24,(SC_FPREGS+192)(a0)
- ldc1 $f26,(SC_FPREGS+208)(a0)
- ldc1 $f28,(SC_FPREGS+224)(a0)
- ldc1 $f30,(SC_FPREGS+240)(a0)
- jr ra
- ctc1 t0,fcr31
-1: jr ra
- nop
- END(_restore_fp_context)
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index ce6cb91..78e1fe3 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -10,6 +10,40 @@
#include <linux/config.h>
+/*
+ * Emulator context save/restore to/from a signal context
+ * presumed to be on the user stack, and therefore accessed
+ * with appropriate macros from uaccess.h
+ */
+
+static inline int save_fp_context(struct sigcontext __user *sc)
+{
+ int i;
+ int err = 0;
+
+ for (i = 0; i < 32; i++) {
+ err |=
+ __put_user(current->thread.fpu.fpr[i], &sc->sc_fpregs[i]);
+ }
+ err |= __put_user(current->thread.fpu.fcr31, &sc->sc_fpc_csr);
+
+ return err;
+}
+
+static inline int restore_fp_context(struct sigcontext __user *sc)
+{
+ int i;
+ int err = 0;
+
+ for (i = 0; i < 32; i++) {
+ err |=
+ __get_user(current->thread.fpu.fpr[i], &sc->sc_fpregs[i]);
+ }
+ err |= __get_user(current->thread.fpu.fcr31, &sc->sc_fpc_csr);
+
+ return err;
+}
+
static inline int
setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
{
@@ -53,15 +87,14 @@ setup_sigcontext(struct pt_regs *regs, s
* current FPU state.
*/
preempt_disable();
-
- if (!is_fpu_owner()) {
- own_fpu();
- restore_fp(current);
+ if (is_fpu_owner()) {
+ /* save current context to task_struct */
+ save_fp(current);
+ lose_fpu();
}
- err |= save_fp_context(sc);
-
preempt_enable();
+ err |= save_fp_context(sc);
out:
return err;
}
@@ -108,19 +141,16 @@ restore_sigcontext(struct pt_regs *regs,
err |= __get_user(used_math, &sc->sc_used_math);
conditional_used_math(used_math);
+ /* signal handler may have used FPU. Give it up. */
preempt_disable();
+ lose_fpu();
+ preempt_enable();
if (used_math()) {
/* restore fpu context if we have used it before */
- own_fpu();
err |= restore_fp_context(sc);
- } else {
- /* signal handler may have used FPU. Give it up. */
- lose_fpu();
}
- preempt_enable();
-
return err;
}
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index f32a229..409ea50 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -326,6 +326,38 @@ asmlinkage int sys32_sigaltstack(nabi_no
return ret;
}
+/*
+ * This is the o32 version
+ */
+
+static inline int save_fp_context32(struct sigcontext32 __user *sc)
+{
+ int i;
+ int err = 0;
+
+ for (i = 0; i < 32; i+=2) {
+ err |=
+ __put_user(current->thread.fpu.fpr[i], &sc->sc_fpregs[i]);
+ }
+ err |= __put_user(current->thread.fpu.fcr31, &sc->sc_fpc_csr);
+
+ return err;
+}
+
+static inline int restore_fp_context32(struct sigcontext32 __user *sc)
+{
+ int i;
+ int err = 0;
+
+ for (i = 0; i < 32; i+=2) {
+ err |=
+ __get_user(current->thread.fpu.fpr[i], &sc->sc_fpregs[i]);
+ }
+ err |= __get_user(current->thread.fpu.fcr31, &sc->sc_fpc_csr);
+
+ return err;
+}
+
static int restore_sigcontext32(struct pt_regs *regs, struct sigcontext32 __user *sc)
{
u32 used_math;
@@ -367,19 +399,16 @@ static int restore_sigcontext32(struct p
err |= __get_user(used_math, &sc->sc_used_math);
conditional_used_math(used_math);
+ /* signal handler may have used FPU. Give it up. */
preempt_disable();
+ lose_fpu();
+ preempt_enable();
if (used_math()) {
/* restore fpu context if we have used it before */
- own_fpu();
err |= restore_fp_context32(sc);
- } else {
- /* signal handler may have used FPU. Give it up. */
- lose_fpu();
}
- preempt_enable();
-
return err;
}
@@ -598,15 +627,14 @@ static inline int setup_sigcontext32(str
* current FPU state.
*/
preempt_disable();
-
- if (!is_fpu_owner()) {
- own_fpu();
- restore_fp(current);
+ if (is_fpu_owner()) {
+ /* save current context to task_struct */
+ save_fp(current);
+ lose_fpu();
}
- err |= save_fp_context32(sc);
-
preempt_enable();
+ err |= save_fp_context32(sc);
out:
return err;
}
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 6797193..532125f 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1205,77 +1205,6 @@ static inline void mips_srs_init(void)
#endif /* CONFIG_CPU_MIPSR2_SRS */
-/*
- * This is used by native signal handling
- */
-asmlinkage int (*save_fp_context)(struct sigcontext *sc);
-asmlinkage int (*restore_fp_context)(struct sigcontext *sc);
-
-extern asmlinkage int _save_fp_context(struct sigcontext *sc);
-extern asmlinkage int _restore_fp_context(struct sigcontext *sc);
-
-extern asmlinkage int fpu_emulator_save_context(struct sigcontext *sc);
-extern asmlinkage int fpu_emulator_restore_context(struct sigcontext *sc);
-
-#ifdef CONFIG_SMP
-static int smp_save_fp_context(struct sigcontext *sc)
-{
- return cpu_has_fpu
- ? _save_fp_context(sc)
- : fpu_emulator_save_context(sc);
-}
-
-static int smp_restore_fp_context(struct sigcontext *sc)
-{
- return cpu_has_fpu
- ? _restore_fp_context(sc)
- : fpu_emulator_restore_context(sc);
-}
-#endif
-
-static inline void signal_init(void)
-{
-#ifdef CONFIG_SMP
- /* For now just do the cpu_has_fpu check when the functions are invoked */
- save_fp_context = smp_save_fp_context;
- restore_fp_context = smp_restore_fp_context;
-#else
- if (cpu_has_fpu) {
- save_fp_context = _save_fp_context;
- restore_fp_context = _restore_fp_context;
- } else {
- save_fp_context = fpu_emulator_save_context;
- restore_fp_context = fpu_emulator_restore_context;
- }
-#endif
-}
-
-#ifdef CONFIG_MIPS32_COMPAT
-
-/*
- * This is used by 32-bit signal stuff on the 64-bit kernel
- */
-asmlinkage int (*save_fp_context32)(struct sigcontext32 *sc);
-asmlinkage int (*restore_fp_context32)(struct sigcontext32 *sc);
-
-extern asmlinkage int _save_fp_context32(struct sigcontext32 *sc);
-extern asmlinkage int _restore_fp_context32(struct sigcontext32 *sc);
-
-extern asmlinkage int fpu_emulator_save_context32(struct sigcontext32 *sc);
-extern asmlinkage int fpu_emulator_restore_context32(struct sigcontext32 *sc);
-
-static inline void signal32_init(void)
-{
- if (cpu_has_fpu) {
- save_fp_context32 = _save_fp_context32;
- restore_fp_context32 = _restore_fp_context32;
- } else {
- save_fp_context32 = fpu_emulator_save_context32;
- restore_fp_context32 = fpu_emulator_restore_context32;
- }
-}
-#endif
-
extern void cpu_cache_init(void);
extern void tlb_init(void);
extern void flush_tlb_handlers(void);
@@ -1506,11 +1435,6 @@ void __init trap_init(void)
else
memcpy((void *)(CAC_BASE + 0x080), &except_vec3_generic, 0x80);
- signal_init();
-#ifdef CONFIG_MIPS32_COMPAT
- signal32_init();
-#endif
-
flush_icache_range(ebase, ebase + 0x400);
flush_tlb_handlers();
}
diff --git a/arch/mips/math-emu/kernel_linkage.c b/arch/mips/math-emu/kernel_linkage.c
index 56ca0c6..685735e 100644
--- a/arch/mips/math-emu/kernel_linkage.c
+++ b/arch/mips/math-emu/kernel_linkage.c
@@ -44,72 +44,3 @@ void fpu_emulator_init_fpu(void)
current->thread.fpu.fpr[i] = SIGNALLING_NAN;
}
}
-
-
-/*
- * Emulator context save/restore to/from a signal context
- * presumed to be on the user stack, and therefore accessed
- * with appropriate macros from uaccess.h
- */
-
-int fpu_emulator_save_context(struct sigcontext *sc)
-{
- int i;
- int err = 0;
-
- for (i = 0; i < 32; i++) {
- err |=
- __put_user(current->thread.fpu.fpr[i], &sc->sc_fpregs[i]);
- }
- err |= __put_user(current->thread.fpu.fcr31, &sc->sc_fpc_csr);
-
- return err;
-}
-
-int fpu_emulator_restore_context(struct sigcontext *sc)
-{
- int i;
- int err = 0;
-
- for (i = 0; i < 32; i++) {
- err |=
- __get_user(current->thread.fpu.fpr[i], &sc->sc_fpregs[i]);
- }
- err |= __get_user(current->thread.fpu.fcr31, &sc->sc_fpc_csr);
-
- return err;
-}
-
-#ifdef CONFIG_64BIT
-/*
- * This is the o32 version
- */
-
-int fpu_emulator_save_context32(struct sigcontext32 *sc)
-{
- int i;
- int err = 0;
-
- for (i = 0; i < 32; i+=2) {
- err |=
- __put_user(current->thread.fpu.fpr[i], &sc->sc_fpregs[i]);
- }
- err |= __put_user(current->thread.fpu.fcr31, &sc->sc_fpc_csr);
-
- return err;
-}
-
-int fpu_emulator_restore_context32(struct sigcontext32 *sc)
-{
- int i;
- int err = 0;
-
- for (i = 0; i < 32; i+=2) {
- err |=
- __get_user(current->thread.fpu.fpr[i], &sc->sc_fpregs[i]);
- }
- err |= __get_user(current->thread.fpu.fcr31, &sc->sc_fpc_csr);
-
- return err;
-}
-#endif
diff --git a/include/asm-mips/fpu.h b/include/asm-mips/fpu.h
index 8bf510a..b0187a9 100644
--- a/include/asm-mips/fpu.h
+++ b/include/asm-mips/fpu.h
@@ -25,15 +25,6 @@
#include <asm/mips_mt.h>
#endif
-struct sigcontext;
-struct sigcontext32;
-
-extern asmlinkage int (*save_fp_context)(struct sigcontext *sc);
-extern asmlinkage int (*restore_fp_context)(struct sigcontext *sc);
-
-extern asmlinkage int (*save_fp_context32)(struct sigcontext32 *sc);
-extern asmlinkage int (*restore_fp_context32)(struct sigcontext32 *sc);
-
extern void fpu_emulator_init_fpu(void);
extern void _init_fpu(void);
extern void _save_fp(struct task_struct *);
