Hello. Save the Config.OD bit from being clobbered by coherency_setup(). This bit, when set, fixes various errata in the early steppings of Au1x00 SOCs. Unfortunately, the bit was write-only on the most early of them. In addition, also restore the bit after a wakeup from sleep. WBR, Sergei Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
Index: linux-mips/arch/mips/au1000/common/sleeper.S =================================================================== --- linux-mips.orig/arch/mips/au1000/common/sleeper.S +++ linux-mips/arch/mips/au1000/common/sleeper.S @@ -112,6 +112,11 @@ sdsleep: mtc0 k0, CP0_PAGEMASK lw k0, 0x14(sp) mtc0 k0, CP0_CONFIG + + /* We need to catch the ealry Alchemy SOCs with + * the write-only Config[OD] bit and set it back to one... + */ + jal au1x00_fixup_config_od lw $1, PT_R1(sp) lw $2, PT_R2(sp) lw $3, PT_R3(sp) Index: linux-mips/arch/mips/mm/c-r4k.c =================================================================== --- linux-mips.orig/arch/mips/mm/c-r4k.c +++ linux-mips/arch/mips/mm/c-r4k.c @@ -1136,6 +1136,26 @@ static void __init setup_scache(void) c->options |= MIPS_CPU_SUBSET_CACHES; } +void au1x00_fixup_config_od(void) +{ + /* + * c0_config.od (bit 19) was write only (and read as 0) + * on the early revisions of Alchemy SOCs. It disables the bus + * transaction overlapping and needs to be set to fix various errata. + */ + switch (current_cpu_data.cputype) { + case CPU_AU1000: /* rev. DA, HA, HB */ + case CPU_AU1100: /* rev. AB, BA, BC ?? */ + if ((read_c0_prid() & 0xff) < 3) + set_c0_config(1 << 19); + break; + case CPU_AU1500: /* rev. AB */ + if ((read_c0_prid() & 0xff) < 1) + set_c0_config(1 << 19); + break; + } +} + static inline void coherency_setup(void) { change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT); @@ -1156,6 +1176,13 @@ static inline void coherency_setup(void) case CPU_R4400MC: clear_c0_config(CONF_CU); break; + default: + /* + * We need to catch the ealry Alchemy SOCs with + * the write-only co_config.od bit and set it back to one... + */ + au1x00_fixup_config_od(); + break; } }