Hi all,
I am testing linux-2.6.16 on DB1100 board.I downloded the kernel from
www.linux-mips.org and cross compiled with configaration that suit for
Db1100.
I used following command to get vmlinux.srec
$ make vmlinux.srec
and copyed it to /tftpboot/
DB1100 board load the kernel image through nfs using yamon boot loader.
when we reset the board, it starts the yamon and load the kernel from nfs
server after that it hang threre. There are no any kernel messages comming
to minicom ( minicom is running in PC with serial port is connected to the
db1100 boards serial port 0)
Followings are the minicom output I recived
-----------------------------------------------------------
About to load tftp://192.168.0.3//tftpboot/vmlinux.srec
Press Ctrl-C to break
...............................................................................
..................................................................................
................................................................................
Start = 0x8034f000, range = ( 0x80100000,0x8036e084 )
-----------------------------------------------------------
Please can anyone help me to short it out this problem?
Thanx
Safiudeen
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
