"Hw. address read/write mismap 0" or RTL8019 ethernet in linux

[zhuzhenhua <zzh.hust@xxxxxxxxx>]

i want to add a RTL8019 ethernet driver for my board, when i run the
linux, at the init of ethernet, it get

eth0: trigger_send() called with the transmitter busy.
.<6>NETDEV WATCHDOG: eth0: transmit timed out
Hw. address read/write mismap 0
Hw. address read/write mismap 1
Hw. address read/write mismap 2
Hw. address read/write mismap 3
Hw. address read/write mismap 4
Hw. address read/write mismap 5

then i check the code and find it's in 8390.c, caused by uncorrect
write of MAC addr, and now i repalce all the inb,outb,inb_p, outb_p
with get_reg and put_reg in the 8390.c.as follow:

static unsigned char get_reg (unsigned int regno)
{
	return (*(volatile unsigned char *) regno);
}

static void put_reg (unsigned int regno, unsigned char val)
{
	*(volatile unsigned char *) regno = val;
}

 it can run over t he ethernet init, and it also can mount nfs root
fs, it can ping and responding to ping, and also can do copy,delete in
the nfs root.
 but when i run  application in nfs root, it get message as follow,
and hang on it
"nfs: server 192.168.81.142 not responding, still trying"

does someone have any idea of this situation?

thanks for any hints

Best regards

zhuzhenhua