On Sun, 19 Feb 2006, Martin Michlmayr wrote:
> diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
> index 6acfa3d..dd628cb 100644
> --- a/drivers/mtd/devices/Kconfig
> +++ b/drivers/mtd/devices/Kconfig
> @@ -47,11 +47,6 @@ config MTD_MS02NV
> accelerator. Say Y here if you have a DECstation 5000/2x0 or a
> DECsystem 5900 equipped with such a module.
>
> - If you want to compile this driver as a module ( = code which can be
> - inserted in and removed from the running kernel whenever you want),
> - say M here and read <file:Documentation/modules.txt>. The module will
> - be called ms02-nv.o.
> -
> config MTD_DATAFLASH
> tristate "Support for AT45xxx DataFlash"
> depends on MTD && SPI_MASTER && EXPERIMENTAL
NAK.
> diff --git a/drivers/net/declance.c b/drivers/net/declance.c
> index d049129..6561575 100644
> --- a/drivers/net/declance.c
> +++ b/drivers/net/declance.c
> @@ -1301,7 +1301,6 @@ static void __exit dec_lance_cleanup(voi
> while (root_lance_dev) {
> struct net_device *dev = root_lance_dev;
> struct lance_private *lp = netdev_priv(dev);
> -
> unregister_netdev(dev);
> #ifdef CONFIG_TC
> if (lp->slot >= 0)
NAK.
> diff --git a/drivers/scsi/dec_esp.c b/drivers/scsi/dec_esp.c
> index e755664..4b86685 100644
> --- a/drivers/scsi/dec_esp.c
> +++ b/drivers/scsi/dec_esp.c
> @@ -55,7 +55,7 @@
>
> static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
> static void dma_drain(struct NCR_ESP *esp);
> -static int dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd * sp);
> +static int dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd *sp);
> static void dma_dump_state(struct NCR_ESP *esp);
> static void dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length);
> static void dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length);
ACK.
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 7d7724c..7e63f15 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -1336,8 +1336,8 @@ config FB_PMAGB_B
> select FB_CFB_IMAGEBLIT
> help
> Support for the PMAGB-B TURBOchannel framebuffer card used mainly
> - in the MIPS-based DECstation series. The card is currently only
> - supported in 1280x1024x8 mode.
> + in the MIPS-based DECstation series. The card is currently only
> + supported in 1280x1024x8 mode.
>
> config FB_MAXINE
> bool "Maxine (Personal DECstation) onboard framebuffer support"
ACK.
Thanks for looking into it.
Maciej
