Hi,
No, I am not using fixed memory size.
The original source code (part) in arch/mips/adm5120/memory.c is:
......
#define ADM5120_MEMCTRL 0x1200001c
#define ADM5120_MEMCTRL_SDRAM_MASK 0x7
static const unsigned long adm_sdramsize[] __initdata = {
0x0, /* Reserved */
0x0400000, /* 4Mb */
0x0800000, /* 8Mb */
0x1000000, /* 16Mb */
0x4000000, /* 64Mb */
0x8000000, /* 128Mb */
};
void __init prom_meminit(void)
{
unsigned long base=CPHYSADDR(PFN_ALIGN(&_end));
unsigned long size;
u32 memctrl = *(u32*)KSEG1ADDR(ADM5120_MEMCTRL);
size = adm_sdramsize[memctrl & ADM5120_MEMCTRL_SDRAM_MASK];
add_memory_region(base, size-base, BOOT_MEM_RAM);
}
......
memctrl value returns 0x50403 even though the actual memory size is 64M.
Then I tried to manually set KSEG1ADDR(ADM5120_MEMCTRL) to 0x50404 by
inserting the following lines into prom_meminit(void).
unsigned long size;
+ u32* pm = (u32*)KSEG1ADDR(ADM5120_MEMCTRL);
+ *pm = (*pm & ~ADM5120_MEMCTRL_SDRAM_MASK) + 0x4;
u32 memctrl = *(u32*)KSEG1ADDR(ADM5120_MEMCTRL);
memctrl value returns 0x50404, the boot is failed but many messages
printed to the console:
**********************************************************************
Linux Boot Loader
Copyright 2002-2003 ADMtek, Inc.
CPU: ADM5120 Home Gateway Processor
Boot Loader Version: 2.00.0125
Creation Date: 2003.07.09
Linux version 2.6.12 (root@debian) (gcc version 3.4.2) #36 Wed Aug 31
22:52:06 MDT 2005
memctrl: 50404
CPU revision is: 0001800b
ADM5120 board setup
Determined physical RAM map:
memory: 03b0b000 @ 004f5000 (usable)
Built 1 zonelists
Kernel command line:
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (19 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (30 instructions).
PID hash table entries: 512 (order: 9, 8192 bytes)
CPU clock: 175MHz
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 59776k/60460k available (2369k kernel code, 624k reserved, 375k
data, 2004k init, 0k highmem)
Mount-cache hash table entries: 512
Data bus error, epc == 80108e50, ra == 8005c21c
Oops in arch/mips/kernel/traps.c::do_be, line 354[#1]:
Cpu 0
$ 0 : 00000000 10008c00 804fb410 8c8506e4
$ 4 : 804fb410 b31e0620 00000040 ffffffff
$ 8 : 00000002 00000000 00000000 804b0000
$12 : 80288214 00100100 00200200 804fc8f4
$16 : 804fb400 804fc960 804fc96c 8109eac0
$20 : 804b0000 00000000 000000d0 11110017
$24 : 00000000 80283de2
$28 : 80282000 80283e28 80ee1da0 8005c21c
Hi : 00000000
Lo : 00000ea0
epc : 80108e50 both_aligned+0x10/0x64 Not tainted
ra : 8005c21c cache_alloc_refill+0x254/0x690
Status: 10008c02 KERNEL EXL
Cause : 3080001c
PrId : 0001800b
Modules linked in:
Process swapper (pid: 0, threadinfo=80282000, task=80284000)
Stack : 0000000d 804b0000 10008c01 000041ed 804fb000 800c2130 10008c01
804f7ed4
00000000 80255da0 804b0000 00000000 11110016 11110017 80ee1da0
8005bc60
804fb000 8009fffc 804fc86c 00000000 00000000 8009e67c 804fb000
000041ed
00000000 800a0814 00000000 804f7ed4 80000000 800c2130 00000000
8009e924
00000000 800849d4 8028994c 8025e89c 804f7ed4 804fb000 800c21a8
800c2190
...
Call Trace:
[<800c2130>] ramfs_fill_super+0x0/0xac
[<8005bc60>] kmem_cache_alloc+0x94/0x9c
[<8009fffc>] alloc_inode+0x11c/0x144
[<8009e67c>] d_alloc+0x34/0x228
[<800a0814>] new_inode+0x14/0x8c
[<800c2130>] ramfs_fill_super+0x0/0xac
[<8009e924>] d_alloc_root+0x30/0x68
[<800849d4>] sget+0x324/0x3ac
[<800c21a8>] ramfs_fill_super+0x78/0xac
[<800c2190>] ramfs_fill_super+0x60/0xac
[<800c2130>] ramfs_fill_super+0x0/0xac
[<800859b0>] get_sb_nodev+0x84/0xdc
[<800a31a8>] alloc_vfsmnt+0xa8/0xe8
[<8005ddcc>] kmem_cache_create+0x770/0x7c4
[<80085b54>] do_kern_mount+0x68/0x1b0
[<802c58f0>] mnt_init+0xe4/0x280
[<802c5848>] mnt_init+0x3c/0x280
[<802c575c>] inode_init+0x4c/0xfc
[<802c5538>] vfs_caches_init+0x100/0x1d0
[<802c5528>] vfs_caches_init+0xf0/0x1d0
[<800f88c0>] key_link+0x40/0x5c
[<802b17c8>] start_kernel+0x1e8/0x260
[<802b17c0>] start_kernel+0x1e0/0x260
[<802b112c>] unknown_bootoption+0x0/0x310
Code: 11000017 30d8001f 00000000 <8ca80000> 8ca90004 8caa0008
8cab000c 24c6ffe0 8cac0010
Kernel panic - not syncing: Attempted to kill the idle task!
******************************************************************
Any suggestions will be appreciated!
Yoichi Yuasa wrote:
Hi,
2005/9/1, Zhuang Yuyao <ihollo@xxxxxxx>:
Hi,
I've just upgraded the SDRAM on my adm5120 board from 16M to 64M, but
while the board is booting, it still reports that only 16M sdram is
availible.
Since I do not have the source code of the bootloader, is there any way
to let the board to boot with 64M sdram, or should I change to another
bootloader?
If you are using add_memory_region() with fixed memory size,
you should change the value of it.
Yoichi
