Thanks for your help. Yes I do need SMP. Jason Liu of PMC did a check on my serial number, and found that I have rev 1.1 silicon. He says I need rev 1.2 in order to use a 2.6.x kernel. I have shipped my hardware back to them for an upgrade. Hopefully, I'll be back in business in a week or two. Bryan -----Original Message----- From: Alex Gonzalez [mailto:linux-mips@xxxxxxxxxxxxxxxx] Sent: Wednesday, May 04, 2005 9:56 AM To: Bryan Althouse Cc: linux-mips@xxxxxxxxxxxxxx; TheNop@xxxxxxx Subject: Re: I had no problems compiling the linux-2.6.10 kernel from pmc-sierra's ftp. > Make[3]: *** [drivers/char/agp/backend.o] Error 1 Do you need AGP support? My kernel is configured without it. Alex On Thu, 2005-04-28 at 20:15, Bryan Althouse wrote: > Hello, > > I would like to use a 2.6.x kernel with my Yosemite/HalfDome board. > Somehow, I am unable to compile the kernel. I have tried the 2.6.10 kernel > trees from ftp.pmc-sierra.com and also the latest 2.6.12 snapshot from > linux-mips. I am using the 3.3.x cross compile tools from > ftp.pmc-sierra.com . The 2.4.x kernels from PMC compile fine. > > In the case of 2.6.10 from ftp.pmc-sierra.com, my error looks like: > Make[3]: *** [drivers/char/agp/backend.o] Error 1 > > > In the case of 2.6.12 from linux-mips, my error looks like: > drivers/net/titan_ge.c1950: error: 'titan_device_remove" undeclared > here (not in a function) > > My compile process is like so: > make mrproper > make xconfig > make oldconfig > make ARCH=mips CROSS_COMPILE=/<tool_path>/mips64-linux-gnu- vmlinux > > Could someone share their .config with me, or make some suggestions? > > Thank you, > Bryan > >
