Greg Weeks
YAMON ROM Monitor, Revision 02.06. Copyright (c) 1999-2004 MIPS Technologies, Inc. - All Rights Reserved. For a list of available commands, type 'help'. Compilation time = Mar 23 2004 16:50:44 Board type/revision = 0x02 (Malta) / 0x00 Core board type/revision = 0x01 (CoreLV) / 0x01 System controller/revision = Galileo / GT_64120A-B-1 FPGA revision = 0x0001 MAC address = 00.d0.a0.00.01.9a Board S/N = 0000000162 PCI bus frequency = 33.33 MHz Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00 Processor ID/revision = 0x80 (MIPS 4Kc) / 0x01 Endianness = Little CPU/Bus frequency = 80 MHz / 40 MHz Flash memory size = 4 MByte SDRAM size = 64 MByte First free SDRAM address = 0x800b3850 YAMON> load About to load tftp://192.168.25.2/vmlinux.srec Press Ctrl-C to break ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ................. Start = 0x803d2000, range = (0x80100000,0x803f5085), format = SREC YAMON> go . ip=dhcp LINUX started... Config serial console: console=ttyS0,38400n8r Linux version 2.6.12-rc1 (gweeks@xxxxxxxxxxxxxxxxxx) (gcc version 3.4.1 20040714 (TimeSys 3.4.1-7)) #1 Mon Apr 4 15:21:59 EDT 2005 CPU revision is: 00018001 Determined physical RAM map: memory: 00001000 @ 00000000 (reserved) memory: 000ef000 @ 00001000 (ROM data) memory: 00329000 @ 000f0000 (reserved) memory: 03be7000 @ 00419000 (usable) Built 1 zonelists Kernel command line: ip=dhcp console=ttyS0,38400n8r Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes. Primary data cache 16kB, 4-way, linesize 16 bytes. Synthesized TLB refill handler (19 instructions). Synthesized TLB load handler fastpath (31 instructions). Synthesized TLB store handler fastpath (31 instructions). Synthesized TLB modify handler fastpath (30 instructions). PID hash table entries: 512 (order: 9, 8192 bytes) CPU frequency 80.00 MHz Using 40.001 MHz high precision timer. Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 60672k/61340k available (2227k kernel code, 628k reserved, 656k data, 144k init, 0k highmem) Mount-cache hash table entries: 512 Checking for 'wait' instruction... available. NET: Registered protocol family 16 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@xxxxxxxxxxxxx) devfs: boot_options: 0x0 Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). Initializing Cryptographic API rtc: SRM (post-2000) epoch (2000) detected Real Time Clock Driver v1.12a Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize pcnet32.c:v1.30i 06.28.2004 tsbogend@xxxxxxxxxxxxxxxx pcnet32: PCnet/FAST III 79C973 at 0x1060, 00 d0 a0 00 01 9a assigned IRQ 10. eth0: registered as PCnet/FAST III 79C973 pcnet32: 1 cards_found. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:0a.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1080-0x1087, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1088-0x108f, BIOS settings: hdc:pio, hdd:pio hda: IBM-DTLA-307075, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 150136560 sectors (76869 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(33) hda: cache flushes not supported /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 eth0: link up, 100Mbps, half-duplex, lpa 0x40A1 Sending DHCP requests ., OK IP-Config: Got DHCP answer from 192.168.25.2, my address is 192.168.25.4 IP-Config: Complete: device=eth0, addr=192.168.25.4, mask=255.255.255.0, gw=255.255.255.255, host=192.168.25.4, domain=, nis-domain=(none), bootserver=192.168.25.2, rootserver=192.168.25.2, rootpath=/opt/timesys/linux/6.0/mipsel-std/rfs Looking up port of RPC 100003/2 on 192.168.25.2 Looking up port of RPC 100005/1 on 192.168.25.2 VFS: Mounted root (nfs filesystem) readonly. Freeing prom memory: 956kb freed Freeing unused kernel memory: 1100k freed Algorithmics/MIPS FPU Emulator v1.5 INIT: version 2.84 booting Executing first boot commands mount: directory to mount not in host:dir format mount: directory to mount not in host:dir format Welcome to TimeSys release 1.0 (distbuilder) Making extra nodes: [ OK ][ OK ] Starting udev: [ OK ] Initializing hardware... storage network audio done[ OK ] raidautorun: failed to open /dev/md0: 6 Configuring kernel parameters: [ OK ] Setting clock : Mon Apr 4 20:28:54 UTC 2005 [ OK ] Setting hostname timesys-bsp: [ OK ] Remounting root filesystem in read-write mode: [ OK ] Checking filesystems Checking all file systems. [ OK ] Mounting local filesystems: [ OK ] Enabling swap space: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Setting network parameters: [ OK ] Bringing up loopback interface: Data bus error, epc == 80228860, ra == 80177ce4Oops in arch/mips/kernel/traps.c::do_be, line 336[#1]: Cpu 0 $ 0 : 00000000 1000e94b 1000e96b 00000000 $ 4 : 83ffffa0 1000e929 00000012 1000e94b $ 8 : 003d4457 00637465 00000001 3d445750 $12 : 00000001 83c21d68 00000080 70000000 $16 : 00000023 00000f9f 83ffff9f 00000023 $20 : 1000e928 0001ff9f 00000000 10013af4 $24 : 00000002 8107a600 $28 : 83c20000 83c21ea0 83fff000 80177ce4 Hi : 10624430 Lo : 4fdf32f6 epc : 80228860 src_unaligned_dst_aligned+0x20/0x5c Not tainted ra : 80177ce4 copy_strings+0xf8/0x24c Status: 1000fc03 KERNEL EXL IE Cause : 0080201c PrId : 00018001 Modules linked in: Process ifup (pid: 1610, threadinfo=83c20000, task=806f8b78) Stack : 80000000 10013ad8 81273200 00000080 8107ffe0 83c21f30 8111e000 10013ad8 81273200 00000000 10014800 83c21f30 ffffffff 10013ad8 10013e80 80179404 00000007 8012897c 81273200 8017b4b8 8111e000 8111e000 10013ad8 10014150 00000000 10014150 8010631c 801062f4 0000006a 10006fec 00000000 10014150 10014150 10014800 8010a060 80100f50 10014150 10014800 10013ad8 2ad23d94 ... Call Trace: [<80179404>] do_execve+0x118/0x224 [<8012897c>] __do_softirq+0x8c/0x14c [<8017b4b8>] getname+0x28/0xf8 [<8010631c>] sys_execve+0x50/0x7c [<801062f4>] sys_execve+0x28/0x7c [<8010a060>] stack_done+0x20/0x3c [<80100f50>] mipsIRQ+0x110/0x180 Code: 98a80000 98a90004 24c6fff0 <88a80003> 88a90007 98aa0008 98ab000c 88aa000b 88ab000f CoreHI interrupt, shouldn't happen, so we die here!!! epc : 80128944 Status: 1000fc03 Cause : 10802000 badVaddr : 80107248 GT_INTRCAUSE = 40000009 GT_CPUERR_ADDR = 0004000000 CoreHi interrupt in arch/mips/mips-boards/malta/malta_int.c::corehi_irqdispatch, line 180[#2]: Cpu 0 $ 0 : 00000000 1000fc01 00000100 00000002 $ 4 : 00000000 00000000 00000078 00000059 $ 8 : 06f4c980 000f4237 806f8b78 80400000 $12 : 80400000 fffffffe ffffffff 00000010 $16 : 00000002 1000fc00 83c21df0 00000004 $20 : 0000000a 80400000 80400000 10013af4 $24 : 00000007 83c21c08 $28 : 83c20000 83c21ca8 83fff000 80128ac8 Hi : 00000000 Lo : 00000000 epc : 80128944 __do_softirq+0x54/0x14c Not tainted ra : 80128ac8 do_softirq+0x8c/0xb8 Status: 1000fc03 KERNEL EXL IE Cause : 10802000 PrId : 00018001 Modules linked in: Process ifup (pid: 1610, threadinfo=83c20000, task=806f8b78) Stack : 80330000 803f8a36 1000a000 1000fc00 1000fc00 1000fc00 83c21df0 00000004 1000e928 0001ff9f 00000000 80128ac8 1000e928 0001ff9f 1000a000 1000fc00 1000a000 80100f50 3b9aca00 00000001 80370000 1000fc00 80370000 80123528 00000000 1000fc01 00000001 8036c0b8 8036c0b8 8036c0d0 00000001 804042d4 00001816 8036c0a8 80400000 80400000 80400000 fffffffe ffffffff 00000010 ... Call Trace: [<80128ac8>] do_softirq+0x8c/0xb8 [<80100f50>] mipsIRQ+0x110/0x180 [<80123528>] vprintk+0x334/0x404 [<80107e9c>] __die+0xb0/0xc8 [<80107eac>] __die+0xc0/0xc8 [<80108090>] do_be+0x1b0/0x1f4 [<80228860>] src_unaligned_dst_aligned+0x20/0x5c [<80177ce4>] copy_strings+0xf8/0x24c [<801025d4>] handle_dbe_int+0x2c/0x38 [<80177ce4>] copy_strings+0xf8/0x24c [<8016b26c>] vfs_read+0xbc/0x178 [<80228860>] src_unaligned_dst_aligned+0x20/0x5c [<80179404>] do_execve+0x118/0x224 [<8012897c>] __do_softirq+0x8c/0x14c [<8017b4b8>] getname+0x28/0xf8 [<8010631c>] sys_execve+0x50/0x7c [<801062f4>] sys_execve+0x28/0x7c [<8010a060>] stack_done+0x20/0x3c [<80100f50>] mipsIRQ+0x110/0x180 Code: 3421001f 3821001e 40816000 <3c028040> 2453ea50 26d1cf48 0804a258 24120001 1200000a Kernel panic - not syncing: Aiee, killing interrupt handler!
