Hi Ralf Attached patch implements changes to the ne.c driver to support the TX4927 board. Please review Thanks Manish Lachwani
Source: MontaVista Software, Inc. | http://www.mvista.com | Manish Lachwani <mlachwani@xxxxxxxxxx> Type: Defect Fix Disposition: Submitted to Linux-MIPS Description: Support for RBTX4927 in NS8390 ethernet driver in 2.6.10 Index: linux/drivers/net/ne.c =================================================================== --- linux.orig/drivers/net/ne.c +++ linux/drivers/net/ne.c @@ -112,6 +112,7 @@ {"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */ {"REALTEK", "RTL8019", {0x00, 0x00, 0xe8}}, /* no-name with Realtek chip */ {"LCS-8834", "LCS-8836", {0x04, 0x04, 0x37}}, /* ShinyNet (SET) */ + {"RBHMA4X00-RTL8019", "RBHMA4X00/RTL8019", {0x00, 0x60, 0x0a}}, /* Toshiba built-in */ {NULL,} }; #endif @@ -226,6 +227,10 @@ sprintf(dev->name, "eth%d", unit); netdev_boot_setup_check(dev); +#ifdef CONFIG_TOSHIBA_RBTX4927 + dev->base_addr = 0x06020280; + dev->irq = 29; +#endif err = do_ne_probe(dev); if (err) goto out; @@ -511,6 +516,11 @@ ei_status.name = name; ei_status.tx_start_page = start_page; ei_status.stop_page = stop_page; + +#ifdef CONFIG_TOSHIBA_RBTX4927 + wordlength = 1; +#endif + #ifdef CONFIG_PLAT_OAKS32R ei_status.word16 = 0; #else
