Support for the third ethernet port on Titan 1.2 (2.4)

[Manish Lachwani <mlachwani@xxxxxxxxxx>]

Hello Ralf

Attached patch initializes port #2 of the titan 1.2 GE subsystem in 2.4

Thanks
Manish Lachwani

--- drivers/net/titan_ge.c.orig	2004-10-20 15:41:35.000000000 -0700
+++ drivers/net/titan_ge.c	2004-10-20 16:04:16.000000000 -0700
@@ -522,6 +522,8 @@
 				ack &= ~(0x3);
 			if (port_num == 1)
 				ack &= ~(0x300);
+			if (port_num == 2)
+				ack &= ~(0x30000);

 			/* Interrupts have been disabled */
 			TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_IE, ack);
@@ -972,6 +974,53 @@
 		TITAN_GE_WRITE(0x494c, reg_data);
 	}

+	/*
+	 * Titan 1.2 does support port #2
+	 */
+	if (port_num == 2) {
+		/*
+		 * Descriptors in SRAM
+		 */
+		reg_data = TITAN_GE_READ(0x48a0);
+
+		reg_data |= 0x100000;
+		reg_data |= (0xff << 10) | (2*(0xff + 1));
+
+		TITAN_GE_WRITE(0x48a0, reg_data);
+		/*
+		 * BAV2,BAV and DAV settings for the Rx FIFO
+		 */
+		reg_data1 = TITAN_GE_READ(0x48a4);
+		reg_data1 |= ( (0x10 << 20) | (0x10 << 10) | 0x1);
+		TITAN_GE_WRITE(0x48a4, reg_data1);
+
+		reg_data &= ~(0x00100000);
+		reg_data |= 0x200000;
+
+		TITAN_GE_WRITE(0x48a0, reg_data);
+
+		reg_data = TITAN_GE_READ(0x4958);
+		reg_data |= 0x100000;
+
+		TITAN_GE_WRITE(0x4958, reg_data);
+		reg_data |= (0xff << 10) | (2*(0xff + 1));
+		TITAN_GE_WRITE(0x4958, reg_data);
+
+		/*
+		 * BAV2, BAV and DAV settings for the Tx FIFO
+		 */
+
+		reg_data1 = TITAN_GE_READ(0x495c);
+		reg_data1 = ( (0x1 << 20) | (0x1 << 10) | 0x10);
+
+		TITAN_GE_WRITE(0x495c, reg_data1);
+
+		reg_data &= ~(0x00100000);
+		reg_data |= 0x200000;
+
+		TITAN_GE_WRITE(0x4958, reg_data);
+	}
+
 	if (port_num == 2) {
 		reg_data = TITAN_GE_READ(0x48a0);

@@ -1094,6 +1143,9 @@
 		reg_data1 |= 0x300;
 	}

+	if (port_num == 2)
+		reg_data1 |= 0x30000;
+
 	TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_IE, reg_data1);
 	TITAN_GE_WRITE(0x003c, 0x300);
 	
@@ -1974,6 +2026,13 @@
 		printk(KERN_ERR "Error registering the TITAN Ethernet"
 				"driver for port 1\n");

+	/*
+	 * Titan 1.2 does support port #2
+	 */
+	if (titan_ge_init(2))
+		printk(KERN_ERR "Error registering the TITAN Ethernet"
+				"driver for port 2\n");
+
 	return 0;
 }