> Hello, > > I'm trying to get VGA output on a MIPSel system (MeshCube > http://www.meshcube.org) to work. > The system uses a miniPCI ATI Rage VGA card (=> problem does not get > initialized due to lack of system BIOS => hopefully initialized by int10 > XFree86 x86 emulator code). > > I've attached an USB mouse and keyboard but fail to start X due to > > Fatal server error: > xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory) > > My questions to those working with MIPS boards / on the Ruby/Linux console > project are: > - 1. How to test the USB input functionality? > (I could test the mouse by doing: cat < /dev/input/mice > => any hints on doing something similar for the keyboard?) not a guru here, but i hope this will help you ----------------------- modprobe evdev cat /proc/bus/input/devices : Bus=0011 Vendor=0001 Product=0001 Version=ab41 N: Name="AT Translated Set 2 keyboard" P: Phys=isa0060/serio0/input0 H: Handlers=kbd event0 B: EV=120003 B: KEY=4 2000000 2b803878 f840d001 f2ffffdf ffefffff ffffffff fffffffe B: LED=7 <snip> cat /dev/input/event0 ------ should give you some characters on typing to the corresponding keyboard > - 2. Any hints on the missing /dev/tty0 stuff? (this is maybe > related to the console / keyboard stuff?) > > Any hints are welcome, best regards > Ralf best, svetljo -- NEU: WLAN-Router für 0,- EUR* - auch für DSL-Wechsler! GMX DSL = supergünstig & kabellos http://www.gmx.net/de/go/dsl
