On Fri, May 14, 2004 at 08:43:44AM +0100, Peter Horton wrote:
> Have you tried any other hardware in the slot, PCI network card perhaps ?
>
> P.
yeah. adding cards like a tulip network card, linksys wmp11 wireless card. even a
wintv pci (analogue) card all work ;
0000:00:0a.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43
(rev 41)
Subsystem: Kingston Technologies: Unknown device 0001
Flags: bus master, medium devsel, latency 64, IRQ 23
I/O ports at 1080 [size=288M]
Memory at 120c0400 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at 00040000 [disabled]
cat /proc/interrupts
CPU0
2: 0 XT-PIC cascade
14: 27636 XT-PIC ide0
18: 435142 MIPS timer
19: 696 MIPS eth0
20: 7 MIPS eth2
21: 302 MIPS serial
22: 0 MIPS cascade
23: 100002 MIPS eth1
it just seems to be the DVB card that the pci code doesnt like, for some reason ..
all ideas warmly received ;)
Kieran.
Attachment:
signature.asc
Description: Digital signature
