Louis,
Using Ralf's pre-packaged mips64 gcc 2.95.4 / binutils 2.13.2.1 .rpm, I
wasn't able to get this to build without having CPU-specific gcc opts
(patch below, please verify what flags are appropriate). Also, shouldn't
define_bool CONFIG_BOOT_ELF32 y
be in the config-shared.in in the jaguar section? I cannot link
otherwise...
At this point (with latest linux_2_4 tree), I can boot the kernel but get
a hang after mounting NFS root via the gt64340 eth0. If I can find a
serial cable for the second port, I might try to step with kgdb...
Thanks,
Will
Index: arch/mips64/Makefile
===================================================================
RCS file: /home/cvs/linux/arch/mips64/Makefile,v
retrieving revision 1.22.2.34
diff -U3 -r1.22.2.34 Makefile
--- arch/mips64/Makefile 5 Jul 2003 13:17:04 -0000 1.22.2.34
+++ arch/mips64/Makefile 28 Jul 2003 18:37:47 -0000
@@ -79,6 +79,9 @@
#CFLAGS += -mips64 # Should be used then we get a
MIPS64 compiler
CFLAGS += -mcpu=r8000 -mips4
endif
+ifdef CONFIG_CPU_RM9000
+GCCFLAGS += -mcpu=r8000 -mips4
+endif
#
# We unconditionally build the math emulator
On Wed, 23 Jul 2003, Louis Hamilton wrote:
> Ralf,
>
> Here is 64-bit support for both the RM7000-based Ocelot-C and
> RM9000-based Jaguar ATX platforms.
> Since the port was 2.4.21 based, this patch submission is for the 2.4 tree.
> This patch supersedes the Ocelot-C patch I sent earlier, since it
> encompasses both platforms.
>
> Notes the board support lives under arch/mips/momentum.
> Also, CONFIG_BOARD_SCACHE and CONFIG_RM7000_CPU_SCACHE are utilized and
> integrated into each platform's default configuration files.
> As in the first patch, drivers/net/mv64340_eth.{c,h} is added to provide
> ethernet support.
>
> If it looks ok, please check changes into the tree.
>
> Regards,
> Louis
>
> Louis Hamilton
> Red Hat, Inc.
>
>
