I made a mistake. I'm sorry, these projects use *busybox*. Don't know if they use UClibC or not. Some wires in my brain got crossed. Sorry about that. But, I do recommend UClibC. -Jeff On Mon, Jun 09, 2003 at 11:49:51AM -0700, Jeff Baitis wrote: > I highly recommend looking at the UClibC project. Erik's code is a pleasure to > work with. http://www.uclibc.org/ > > It is even possible to build libstdc++ with UClibC, if you are so inclined... > And, a number of commercial projects use UClibC , such as Linksys: > http://lkml.org/archive/2003/6/7/164/index.html > > and Belkin: > > http://lkml.org/archive/2003/6/8/31/index.html > > <shameless YRO plug> > > -Jeff > > > > On Mon, Jun 09, 2003 at 07:37:19PM +0200, Baruch Chaikin wrote: > > Hi all, > > > > I'm using MIPS kernel 2.4.18 with NFS file system mounted on a RedHat > > machine. This works fine, but is unsuitable for system deployment. Do > > you have hints for me where to start, in order to put the file system on > > flash? The platform I'm using is very limited - only one MTD block of > > 2.5 MB is available for the file system, out of a 4 MB flash: > > 0.5 MB is allocated for the firmware code > > 1.0 MB for the compressed kernel image > > 2.5 MB for the (compressed?) file system > > > > For example, I've noticed LibC itself is ~5 MB ! > > > > Thanks for any tip, > > - Baruch. > > > > > > > > -- > Jeffrey Baitis - Associate Software Engineer > > Evolution Robotics, Inc. > 130 West Union Street > Pasadena CA 91103 > > tel: 626.535.2776 | fax: 626.535.2777 | baitisj@evolution.com > > -- Jeffrey Baitis - Associate Software Engineer Evolution Robotics, Inc. 130 West Union Street Pasadena CA 91103 tel: 626.535.2776 | fax: 626.535.2777 | baitisj@evolution.com
