Hi Mike, I dont know what version you are trying but the one at linux_2_4 branch (linux2.4.21-pre4) seems to work. You can get it with cvs -d :pserver:cvs@ftp.linux-mips.org:/home/cvs co -r linux_2_4 linux to configure, you can use the default config. from head do .. cp arch/mips/default-atlas .config I tried little endian. If you want that you need to select it in the config. Muthu On Sun, 4 May 2003, Michael Anburaj wrote: > Hi, > > Finally, I could compile vmlinux. I thought of booting this RAM image (or > its SREC equivalent) using the onboard YAMON (in BIG endian mode - I am > having trouble building Redboot in BIG endian mode <issue ported at ecos > forum>, so for now thought of using YAMON). After downloding the > vmlinux.srec over the serial port (Starting at 0x80100000), I issued the go > command to run the image. I get the following message: > > YAMON> go > > LINUX started... > > * Exception (user) : Reserved instruction * > BadVAddr = 0x00000000 Cause = 0x00808028 > Compare = 0x00061a80 Config = 0x80038083 > Config1 = 0x1e9b4d8a Context = 0x63800000 > Count = 0xb9188fd8 DEPC = 0x21424255 > Debug = 0x0400dc0b EPC = 0x80122258 > EntryHi = 0x00000068 EntryLo0 = 0x028ff72e > EntryLo1 = 0x035a241f ErrorEPC = 0x8003add0 > Index = 0x0000000b PRId = 0x00018001 > PageMask = 0x01b90000 Random = 0x0000000d > Status = 0x00000402 WatchHi = 0x00000000 > WatchLo = 0x00000000 Wired = 0x00000000 > Hi = 0x00000000 Lo = 0x04000000 > > $ 0(zr):0x00000000 $ 8(t0):0x00000000 $16(s0):0x802d810a > $24(t8):0xffffffff > $ 1(at):0x80280000 $ 9(t1):0x00000000 $17(s1):0x802d810c > $25(t9):0x802c1e94 > $ 2(v0):0x0000000a $10(t2):0x8024f401 $18(s2):0x00000400 > $26(k0):0x00000000 > $ 3(v1):0x00000000 $11(t3):0x00000000 $19(s3):0x00000001 > $27(k1):0x00000000 > $ 4(a0):0x00000000 $12(t4):0x00000000 $20(s4):0x0000001a > $28(gp):0x802c0000 > $ 5(a1):0x80280000 $13(t5):0x00000000 $21(s5):0x0000000a > $29(sp):0x802c1f58 > $ 6(a2):0x8024385a $14(t6):0x802d8109 $22(s6):0x0000003e > $30(s8):0x800b1080 > $ 7(a3):0x00000000 $15(t7):0xfffffffe $23(s7):0x0000003c > $31(ra):0x80122230 > > > The linux image started fine, but caused an exception after a while. Is this > because Linux is not compatible with YAMON? If so, what are the possible > monitor programs that can go with Linux? Please point me to the documents in > this regard (documents on running Linux executable on Atlas 4Kc board). > > Or will Linux work with any ROM monitor? If so, please let me know the > reason for the exception. > > Thanks a lot, > -Mike. > > _________________________________________________________________ > STOP MORE SPAM with the new MSN 8 and get 2 months FREE* > http://join.msn.com/?page=features/junkmail > >
