Hmm. The kernel is very old. (2.2). I suggest you grab something like 2.4.18 or later.. you don't need the root filesystem yet, just the kernel. The fact that the LED display doesn't start scrolling indicates something is going wrong quite early on. suggestions: - grab a mips-malta kernel version 2.4.18 or later - try flipping your machine to Little Endian and try a little-endian kernel (shouldn't make any difference) after that, time to read the source... Neal. -----Original Message----- From: ZhouY.external@infineon.com [mailto:ZhouY.external@infineon.com] Sent: 27 February 2003 16:44 To: ncrook@micron.com Cc: linux-mips@linux-mips.org Subject: AW: MIPS Malta board Linux installation I tried again. The result is same. The green LED display shows 'LINUX' not 'LINUX on malta'. All the status LED are green except the LED rst is off. There are 2 kernel images(el and eb), one of them is vmlinux-2.2.12.mips.malta.eb-01.05.srec, which is the current one. I double checked my console and its baud rate is 38400. From this symptom, what kind of conclusion can you draw? Best regards, Yidan
