Hello everyone, I tried to install a Linux to my MIPS Malta board, but during the time of NFS installation, the linux crashed. The linux distribution is provided by MIPS Malta Board CD and I exactly followed the installation manual. The following messages are the error messages and the configuration information. Do you have any clues about it? Thanks in advance! Best regards, Yidan Zhou ---------------------------------------------------------------------- YAMON> info all **** Info boot **** YAMON ROM Monitor, Revision 02.02. Copyright (c) 1999-2001 MIPS Technologies, Inc. - All Rights Reserved. For a list of available commands, type 'help'. Compilation time = Sep 12 2002 11:41:49 **** Info board **** Board type/revision = 0x02 (Malta) / 0x00 Core board type/revision = 0x01 (CoreLV) / 0x01 FPGA revision = 0x0001 MAC address = 00.d0.a0.00.01.77 Board S/N = 0000000127 PCI bus frequency = 16.67 MHz **** Info cpu **** Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00 Processor ID/revision = 0x80 (MIPS 4Kc) / 0x05 Endianness = Big CPU/Bus frequency = 125 MHz / 63 MHz ICACHE size = 16 kByte ICACHE line size = 16 bytes ICACHE associativity = 4-way DCACHE size = 16 kByte DCACHE line size = 16 bytes DCACHE associativity = 4-way TLB entries = 16 CPU type = MIPS32 MIPS16e implemented = No EJTAG implemented = Yes FPU implemented = No **** Info memory **** Monitor flash phys base = 0x1e000000 Monitor flash size = 0x003e0000 Env. flash phys base = 0x1e3e0000 Env. flash size = 0x00020000 SDRAM phys base = 0x00000000 SDRAM size = 0x04000000 SDRAM refresh interval = 14520 ns SDRAM CAS latency = 2 cycles SDRAM SRAS precharge = 2 cycles SDRAM SRAS to SCAS delay = 2 cycles SDRAM write burst length = 8 SDRAM read burst length = 8 First free SDRAM address = 0x800991f8 Stack size = 0x5000 bytes Application stack size = 0x5000 bytes **** Info uart **** TTY0: Bytes transmitted: 3381 Bytes received: 63 Receive overruns: 0 Receive parity errors: 0 Receive framing errors: 0 Receive breaks: 0 Receive Interrupts: 0 No of resets: 1 TTY1: Bytes transmitted: 0 Bytes received: 0 Receive overruns: 0 Receive parity errors: 0 Receive framing errors: 0 Receive breaks: 0 Receive Interrupts: 0 No of resets: 1 **** Info pci **** PCI bus frequency = 16.67 MHz PCI devices: Bus count = 1, Device count = 7 Bus = 0x00, Dev = 0x00, Function = 0x00 Vendor Id = 0x11ab (Galileo), Dev ID = 0x4620 (64120) Min Gnt = 0x00, Max Lat = 0x00, Lat Tim = 0x20 Int Pin = A, Int Line = None BAR count = 0x03 MEM: Pos = 0x10, Base(CPU/PCI) = 0x00000000/0x00000000, Size = 0x04000000 MEM: Pos = 0x20, Base(CPU/PCI) = 0x04000000/0x04000000, Size = 0x00000010 MEM: Pos = 0x14, Base(CPU/PCI) = 0x04000000/0x04000000, Size = 0x00000000 Bus = 0x00, Dev = 0x0a, Function = 0x00 Vendor Id = 0x8086 (Intel), Dev ID = 0x7110 (PIIX4 Bridge) Min Gnt = 0x00, Max Lat = 0x00, Lat Tim = 0x20 Int Pin = None, Int Line = None BAR count = 0x01 IO: Pos = 0x10, Base(CPU/PCI) = 0x18000000/0x00000000, Size = 0x00001000 Bus = 0x00, Dev = 0x0a, Function = 0x01 Vendor Id = 0x8086 (Intel), Dev ID = 0x7111 (PIIX4 IDE) Min Gnt = 0x00, Max Lat = 0x00, Lat Tim = 0x20 Int Pin = None, Int Line = None BAR count = 0x01 IO: Pos = 0x20, Base(CPU/PCI) = 0x18001240/0x00001240, Size = 0x00000010 Bus = 0x00, Dev = 0x0a, Function = 0x02 Vendor Id = 0x8086 (Intel), Dev ID = 0x7112 (PIIX4 USB) Min Gnt = 0x00, Max Lat = 0x00, Lat Tim = 0x20 Int Pin = D, Int Line = 0x0b BAR count = 0x01 IO: Pos = 0x20, Base(CPU/PCI) = 0x18001220/0x00001220, Size = 0x00000020 Bus = 0x00, Dev = 0x0a, Function = 0x03 Vendor Id = 0x8086 (Intel), Dev ID = 0x7113 (PIIX4 Power) Min Gnt = 0x00, Max Lat = 0x00, Lat Tim = 0x20 Int Pin = None, Int Line = 0x09 BAR count = 0x02 IO: Pos = 0x40, Base(CPU/PCI) = 0x18001000/0x00001000, Size = 0x00000100 IO: Pos = 0x90, Base(CPU/PCI) = 0x18001100/0x00001100, Size = 0x00000100 Bus = 0x00, Dev = 0x0b, Function = 0x00 Vendor Id = 0x1022 (AMD), Dev ID = 0x2000 (79C973) Min Gnt = 0x18, Max Lat = 0x18, Lat Tim = 0x20 Int Pin = A, Int Line = 0x0a BAR count = 0x02 IO: Pos = 0x10, Base(CPU/PCI) = 0x18001200/0x00001200, Size = 0x00000020 MEM: Pos = 0x14, Base(CPU/PCI) = 0x08011000/0x08011000, Size = 0x00000020 Bus = 0x00, Dev = 0x0c, Function = 0x00 Vendor Id = 0x1013 (Crystal), Dev ID = 0x6005 (4281) Min Gnt = 0x04, Max Lat = 0x18, Lat Tim = 0x20 Int Pin = A, Int Line = 0x0b BAR count = 0x02 MEM: Pos = 0x10, Base(CPU/PCI) = 0x08010000/0x08010000, Size = 0x00001000 MEM: Pos = 0x14, Base(CPU/PCI) = 0x08000000/0x08000000, Size = 0x00010000 **** Info ide **** **** Info isa **** Device Address(ISA) Address(CPU) Interrupt line ----------------------------------------------------- TTY0 0x3f8 0x180003f8 IRQ4 TTY1 0x2f8 0x180002f8 IRQ3 LPT 0x378 0x18000378 IRQ7 FDD 0x3f0 0x180003f0 IRQ6 KYBD 0x060 0x18000060 IRQ1 MOUSE 0x060 0x18000060 IRQ12 **** Info lan **** MII status: Link is up, mode: 10 Mbit/s, half-duplex Packets received: 0 Packets transmitted: 0 Bytes received: 0 Bytes transmitted: 0 Receive errors: 0 Transmit errors: 0 Multicasts received: 0 Collisions: 0 Interrupts: 4 Receive CRC errors: 0 Receive frame error: 0 Receive FIFO overrun errors : 0 Transmit aborted errors: 0 Transmit lost carrier errors: 0 Transmit FIFO underrun errors: 0 Transmit signal quality errors: 0 Transmit late collision errors: 0 Transmit timeout errors: 0 YAMON> set baseboardserial (RO) 0000000127 bootfile (R/W) bootrom.hex bootprot (R/W) tftp bootserport (R/W) tty0 bootserver (R/W) 192.168.149.114 cpuconfig (R/W) ethaddr (RO) 00.d0.a0.00.01.77 gateway (R/W) 0.0.0.0 ipaddr (R/W) 192.168.149.116 memsize (RO) 0x04000000 modetty0 (R/W) 38400,n,8,1,hw modetty1 (R/W) 38400,n,8,1,hw prompt (R/W) YAMON start (R/W) subnetmask (R/W) 255.255.255.0 yamonrev (RO) 02.02 YAMON> load tftp://192.168.149.1/vmlinux-2.2.12.mips.malta.eb-01.05.srec About to load tftp://192.168.149.1/vmlinux-2.2.12.mips.malta.eb-01.05.srec Press Ctrl-C to break ........................................ ........................................ ........................................ .. Start = 0x80100608, range = (0x80100000,0x8024015f), format = SREC YAMON> go . nfsroot=192.168.149.1:/c/linux/mipseb ip=192.168.149.116 LINUX started... EURfoe>_~Rm>}o?m g~עh{/ ;ywm ^}Y|r{o _w{y_߯~?nh uw m__{}z+_O ۿo_= /?Yo __??ko? >w=wo?Y{ } i}Y{Y߷y} ~o|{ݿy z} ݺm߯ߏyo =~|ݻ?-Oy oo [mz}?{
