Hello Ralf,
Machine selection is sorted alphabetically by this patch.
Would you apply this patch to CVS on linux_2_4 tag of ftp.linux-mips.org?
Best Regards,
Yoichi
diff -aruN --exclude=CVS --exclude=.cvsignore linux.orig/arch/mips/config-shared.in linux/arch/mips/config-shared.in
--- linux.orig/arch/mips/config-shared.in Mon Feb 10 12:26:33 2003
+++ linux/arch/mips/config-shared.in Mon Feb 10 21:10:14 2003
@@ -30,74 +30,6 @@
dep_bool 'Support for Alchemy PB1100 board' CONFIG_MIPS_PB1100 $CONFIG_MIPS32
dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32
dep_bool 'Support for BAGET MIPS series (EXPERIMENTAL)' CONFIG_BAGET_MIPS $CONFIG_MIPS32 $CONFIG_EXPERIMENTAL
-bool 'Support for CASIO CASSIOPEIA E-10/15/55/65' CONFIG_CASIO_E55
-dep_bool 'Support for Cobalt Server (EXPERIMENTAL)' CONFIG_MIPS_COBALT $CONFIG_EXPERIMENTAL
-if [ "$CONFIG_MIPS32" = "y" ]; then
- bool 'Support for DECstations' CONFIG_DECSTATION
-else
- dep_bool 'Support for DECstations (EXPERIMENTAL)' CONFIG_DECSTATION $CONFIG_EXPERIMENTAL
-fi
-dep_bool 'Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)' CONFIG_MIPS_EV64120 $CONFIG_EXPERIMENTAL
-if [ "$CONFIG_MIPS_EV64120" = "y" ]; then
- bool ' Enable Second PCI (PCI1)' CONFIG_EVB_PCI1
- choice ' Galileo Chip Clock' \
- "75 CONFIG_SYSCLK_75 \
- 83.3 CONFIG_SYSCLK_83 \
- 100 CONFIG_SYSCLK_100" 83.3
-fi
-dep_bool 'Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)' CONFIG_MIPS_EV96100 $CONFIG_EXPERIMENTAL
-bool 'Support for Globespan IVR board' CONFIG_MIPS_IVR
-bool 'Support for Hewlett Packard LaserJet board' CONFIG_HP_LASERJET
-bool 'Support for IBM WorkPad z50' CONFIG_IBM_WORKPAD
-bool 'Support for LASAT Networks platforms' CONFIG_LASAT
-if [ "$CONFIG_LASAT" = "y" ]; then
- tristate ' PICVUE LCD display driver' CONFIG_PICVUE
- dep_tristate ' PICVUE LCD display driver /proc interface' CONFIG_PICVUE_PROC $CONFIG_PICVUE
- bool ' DS1603 RTC driver' CONFIG_DS1603
- bool ' LASAT sysctl interface' CONFIG_LASAT_SYSCTL
-fi
-bool 'Support for ITE 8172G board' CONFIG_MIPS_ITE8172
-if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
- bool ' Support for older IT8172 (Rev C)' CONFIG_IT8172_REVC
-fi
-bool 'Support for MIPS Atlas board' CONFIG_MIPS_ATLAS
-bool 'Support for MIPS Magnum 4000' CONFIG_MIPS_MAGNUM_4000
-bool 'Support for MIPS Malta board' CONFIG_MIPS_MALTA
-dep_bool 'Support for MIPS SEAD board (EXPERIMENTAL)' CONFIG_MIPS_SEAD $CONFIG_EXPERIMENTAL
-bool 'Support for Momentum Ocelot board' CONFIG_MOMENCO_OCELOT
-bool 'Support for Momentum Ocelot-G board' CONFIG_MOMENCO_OCELOT_G
-dep_bool 'Support for NEC DDB Vrc-5074 (EXPERIMENTAL)' CONFIG_DDB5074 $CONFIG_EXPERIMENTAL
-bool 'Support for NEC DDB Vrc-5476' CONFIG_DDB5476
-bool 'Support for NEC DDB Vrc-5477' CONFIG_DDB5477
-if [ "$CONFIG_DDB5477" = "y" ]; then
- int ' bus frequency (in kHZ, 0 for auto-detect)' CONFIG_DDB5477_BUS_FREQUENCY 0
-fi
-bool 'Support for NEC Osprey board' CONFIG_NEC_OSPREY
-bool 'Support for NEC Eagle/Hawk board' CONFIG_NEC_EAGLE
-if [ "$CONFIG_NEC_EAGLE" = "y" ]; then
- tristate ' NEC VRC4173 support' CONFIG_VRC4173
-fi
-bool 'Support for Olivetti M700-10' CONFIG_OLIVETTI_M700
-dep_bool 'Support for Philips Nino (EXPERIMENTAL)' CONFIG_NINO $CONFIG_MIPS32 $CONFIG_EXPERIMENTAL
-if [ "$CONFIG_NINO" = "y" ]; then
- choice 'Nino Model Number' \
- "Model-300/301/302/319 CONFIG_NINO_4MB \
- Model-200/210/312/320/325/350/390 CONFIG_NINO_8MB \
- Model-500/510 CONFIG_NINO_16MB" Model-200
-fi
-bool 'Support for SGI IP22 (Indy/Indigo2)' CONFIG_SGI_IP22
-dep_bool 'Support for SGI-IP27 (Origin200/2000)' CONFIG_SGI_IP27 $CONFIG_MIPS64
-if [ "$CONFIG_SGI_IP27" = "y" ]; then
- bool ' IP27 N-Mode' CONFIG_SGI_SN0_N_MODE
- bool ' Discontiguous Memory Support' CONFIG_DISCONTIGMEM
- bool ' NUMA Support' CONFIG_NUMA
- bool ' Mapped kernel support' CONFIG_MAPPED_KERNEL
- bool ' Kernel text replication support' CONFIG_REPLICATE_KTEXT
- bool ' Exception handler replication support' CONFIG_REPLICATE_EXHANDLERS
- define_bool CONFIG_SMP_CAPABLE y
- #bool ' IP27 XXL' CONFIG_SGI_SN0_XXL
-fi
-dep_bool 'Support for SGI-IP32 (O2) (EXPERIMENTAL)' CONFIG_SGI_IP32 $CONFIG_EXPERIMENTAL
dep_bool 'Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)' CONFIG_SIBYTE_SB1xxx_SOC $CONFIG_EXPERIMENTAL
if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then
choice ' BCM1xxx SOC-based board' \
@@ -191,14 +123,82 @@
fi
fi
fi
+dep_bool 'Support for CASIO CASSIOPEIA E-10/15/55/65' CONFIG_CASIO_E55 $CONFIG_MIPS32
+dep_bool 'Support for Cobalt Server (EXPERIMENTAL)' CONFIG_MIPS_COBALT $CONFIG_EXPERIMENTAL
+if [ "$CONFIG_MIPS32" = "y" ]; then
+ bool 'Support for DECstations' CONFIG_DECSTATION
+else
+ dep_bool 'Support for DECstations (EXPERIMENTAL)' CONFIG_DECSTATION $CONFIG_EXPERIMENTAL
+fi
+dep_bool 'Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)' CONFIG_MIPS_EV64120 $CONFIG_EXPERIMENTAL
+if [ "$CONFIG_MIPS_EV64120" = "y" ]; then
+ bool ' Enable Second PCI (PCI1)' CONFIG_EVB_PCI1
+ choice ' Galileo Chip Clock' \
+ "75 CONFIG_SYSCLK_75 \
+ 83.3 CONFIG_SYSCLK_83 \
+ 100 CONFIG_SYSCLK_100" 83.3
+fi
+dep_bool 'Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)' CONFIG_MIPS_EV96100 $CONFIG_EXPERIMENTAL
+bool 'Support for Globespan IVR board' CONFIG_MIPS_IVR
+bool 'Support for Hewlett Packard LaserJet board' CONFIG_HP_LASERJET
+dep_bool 'Support for IBM WorkPad z50' CONFIG_IBM_WORKPAD $CONFIG_MIPS32
+bool 'Support for ITE 8172G board' CONFIG_MIPS_ITE8172
+if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
+ bool ' Support for older IT8172 (Rev C)' CONFIG_IT8172_REVC
+fi
+bool 'Support for LASAT Networks platforms' CONFIG_LASAT
+if [ "$CONFIG_LASAT" = "y" ]; then
+ tristate ' PICVUE LCD display driver' CONFIG_PICVUE
+ dep_tristate ' PICVUE LCD display driver /proc interface' CONFIG_PICVUE_PROC $CONFIG_PICVUE
+ bool ' DS1603 RTC driver' CONFIG_DS1603
+ bool ' LASAT sysctl interface' CONFIG_LASAT_SYSCTL
+fi
+bool 'Support for MIPS Atlas board' CONFIG_MIPS_ATLAS
+bool 'Support for MIPS Magnum 4000' CONFIG_MIPS_MAGNUM_4000
+bool 'Support for MIPS Malta board' CONFIG_MIPS_MALTA
+dep_bool 'Support for MIPS SEAD board (EXPERIMENTAL)' CONFIG_MIPS_SEAD $CONFIG_EXPERIMENTAL
+bool 'Support for Momentum Ocelot board' CONFIG_MOMENCO_OCELOT
+bool 'Support for Momentum Ocelot-G board' CONFIG_MOMENCO_OCELOT_G
+dep_bool 'Support for NEC DDB Vrc-5074 (EXPERIMENTAL)' CONFIG_DDB5074 $CONFIG_EXPERIMENTAL
+bool 'Support for NEC DDB Vrc-5476' CONFIG_DDB5476
+bool 'Support for NEC DDB Vrc-5477' CONFIG_DDB5477
+if [ "$CONFIG_DDB5477" = "y" ]; then
+ int ' bus frequency (in kHZ, 0 for auto-detect)' CONFIG_DDB5477_BUS_FREQUENCY 0
+fi
+dep_bool 'Support for NEC Eagle/Hawk board' CONFIG_NEC_EAGLE $CONFIG_MIPS32
+if [ "$CONFIG_NEC_EAGLE" = "y" ]; then
+ tristate ' NEC VRC4173 support' CONFIG_VRC4173
+fi
+dep_bool 'Support for NEC Osprey board' CONFIG_NEC_OSPREY $CONFIG_MIPS32
+bool 'Support for Olivetti M700-10' CONFIG_OLIVETTI_M700
+dep_bool 'Support for Philips Nino (EXPERIMENTAL)' CONFIG_NINO $CONFIG_MIPS32 $CONFIG_EXPERIMENTAL
+if [ "$CONFIG_NINO" = "y" ]; then
+ choice 'Nino Model Number' \
+ "Model-300/301/302/319 CONFIG_NINO_4MB \
+ Model-200/210/312/320/325/350/390 CONFIG_NINO_8MB \
+ Model-500/510 CONFIG_NINO_16MB" Model-200
+fi
+bool 'Support for SGI IP22 (Indy/Indigo2)' CONFIG_SGI_IP22
+dep_bool 'Support for SGI-IP27 (Origin200/2000)' CONFIG_SGI_IP27 $CONFIG_MIPS64
+if [ "$CONFIG_SGI_IP27" = "y" ]; then
+ bool ' IP27 N-Mode' CONFIG_SGI_SN0_N_MODE
+ bool ' Discontiguous Memory Support' CONFIG_DISCONTIGMEM
+ bool ' NUMA Support' CONFIG_NUMA
+ bool ' Mapped kernel support' CONFIG_MAPPED_KERNEL
+ bool ' Kernel text replication support' CONFIG_REPLICATE_KTEXT
+ bool ' Exception handler replication support' CONFIG_REPLICATE_EXHANDLERS
+ define_bool CONFIG_SMP_CAPABLE y
+ #bool ' IP27 XXL' CONFIG_SGI_SN0_XXL
+fi
+dep_bool 'Support for SGI-IP32 (O2) (EXPERIMENTAL)' CONFIG_SGI_IP32 $CONFIG_EXPERIMENTAL
bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI
-bool 'Support for TANBAC TB0226 (Mbase)' CONFIG_TANBAC_TB0226
+dep_bool 'Support for TANBAC TB0226 (Mbase)' CONFIG_TANBAC_TB0226 $CONFIG_MIPS32
dep_bool 'Support for Toshiba JMR-TX3927 board' CONFIG_TOSHIBA_JMR3927 $CONFIG_MIPS32
-bool 'Support for Victor MP-C303/304' CONFIG_VICTOR_MPC30X
+dep_bool 'Support for Victor MP-C303/304' CONFIG_VICTOR_MPC30X $CONFIG_MIPS32
if [ "$CONFIG_VICTOR_MPC30X" = "y" ]; then
tristate ' NEC VRC4173 support' CONFIG_VRC4173
fi
-bool 'Support for ZAO Networks Capcella' CONFIG_ZAO_CAPCELLA
+dep_bool 'Support for ZAO Networks Capcella' CONFIG_ZAO_CAPCELLA $CONFIG_MIPS32
dep_bool 'High Memory Support' CONFIG_HIGHMEM $CONFIG_MIPS32
