Hi,
when I use binutils 2.12.90.0.12 gcc 3.1 will not compile anymore.
The error is:
...
mkdir libgcc
if [ -f stmp-dirs ]; then true; else touch stmp-dirs; fi
/opt/cross/production/build/gcc/gcc/xgcc -B/opt/cross/production/build/gcc/gcc/
-B/opt/cross/mipsel-linux/mipsel-linux/bin/ -B/opt/cross/mipsel-linux/mipsel-linux/lib/ -isystem
/opt/cross/mipsel-linux/mipsel-linux/include -O2 -DIN_GCC -DCROSS_COMPILE -W -Wall -Wwrite-strings
-Wstrict-prototypes -Wmissing-prototypes -isystem ./include -fPIC -g -DIN_LIBGCC2
-D__GCC_FLOAT_NOT_NEEDED -Dinhibit_libc -I. -I. -I/opt/cross/production/src/gcc-3.1/gcc
-I/opt/cross/production/src/gcc-3.1/gcc/. -I/opt/cross/production/src/gcc-3.1/gcc/config
-I/opt/cross/production/src/gcc-3.1/gcc/../include -DL_muldi3 -c
/opt/cross/production/src/gcc-3.1/gcc/libgcc2.c -o libgcc/./_muldi3.o
/tmp/ccPEIznf.s: Assembler messages:
/tmp/ccPEIznf.s:5: Error: file number 1 already allocated
make[2]: *** [libgcc/./_muldi3.o] Error 1
make[2]: Leaving directory `/opt/cross/production/build/gcc/gcc'
make[1]: *** [libgcc.a] Error 2
make[1]: Leaving directory `/opt/cross/production/build/gcc/gcc'
make: *** [all-gcc] Error 2
...
Building the toolchain works fine with binutils-2.12.1.
I attach 2 files (the build_mips_toolchain and mipsel-linux.source) which I use to build the tools
from scratch on my linux i586 box.
Any program build with this toolchain cannot be opened with gdb.
What are the recommended versions of gcc, glibc and gdb?
Many thanks
Carsten
"H. J. Lu" wrote:
>
> On Mon, Jun 24, 2002 at 11:00:01AM -0400, Daniel Jacobowitz wrote:
> > On Mon, Jun 24, 2002 at 03:29:47PM +0200, Carsten Lange wrote:
> > > Hi,
> > >
> > > I get the above error from gdb 5.2 when using the <file> command.
> > > ...
> > > (gdb) file iprbs
> > > file iprbs
> > > Reading symbols from iprbs...DW_FORM_strp pointing outside of .debug_str section
> > > (gdb)
> > > ...
> > >
> > > My mipsel-linux- toolchain consist of the following packages:
> > > binutils-2.12.1
> > > gcc-3.1
> > > glibc-2.2.5
> > > gdb-5.2
> > >
> > > I have no idea what the problem might be.
> > >
> > > Any hints (solutions/workaround) are welcome.
> >
> > Can you produce a testcase? These versions of the tools should not
> > show the problem, assuming you rebuilt everything using them.
> >
>
> Please get the Linux binutils 2.12.90.0.12. You need that for gcc 3.1
> on Linux/mips.
>
> H.J.
#!/bin/sh
if [ "x$1" == "x" ]
then
echo "usage: $0 <file_to_get_config_from>"
exit 1
fi
if [ -f ${1}.source ]
then
. ${1}.source
else
echo "usage: $0 <file_to_get_config_from>"
exit 1
fi
execute()
{
echo "+++++++++++++++++++++++++++ $@ "
echo "+++++++++++++++++++++++++++ $@ " >> $LOGFILE 2>&1
$@ >> $LOGFILE 2>&1
if [ ! $? = 0 ]
then
echo "$@ FAILED!"
exit 1
fi
}
execute_patch()
{
echo "+ patch $1 -s < $2"
if [ -f $2 ]
then
pkgpatch $1 -s < $2
if [ ! $? = 0 ]
then
echo "patch $1 -s < $2 FAILED!"
exit 1
fi
else
echo "Patchfile $2 not found!"
exit 1
fi
}
#cleanup
execute rm -rf $BUILD
execute mkdir -p $BUILD
execute rm -rf $SRC
execute mkdir -p $SRC
#
#
# BINUTILS
if [ ! -f ${PREFIX}/binutils-${BINUTILS_V} ] ; then
execute cd $SRC
#execute tar xzf $PKG/binutils-${BINUTILS_V}.tar.gz
execute tar xjf $PKG/binutils-${BINUTILS_V}.tar.bz2
execute cd $BUILD
execute mkdir binutils
execute cd binutils
execute $SRC/binutils-${BINUTILS_V}/configure \
--target=${TARGET} \
--prefix=${PREFIX}
execute make
execute make install
execute rm -rf $SRC/binutils-${BINUTILS_V}
execute rm -rf $BUILD/binutils
execute touch ${PREFIX}/binutils-${BINUTILS_V}
fi
#
#
# INCLUDE FILES
#execute rm -rf ${PREFIX}/target
#execute mkdir -p ${PREFIX}/target/include
#execute cd /opt/cross/devel/ip_rbs/linux/include
#execute tar cf /tmp/${TARGET}_include .
#execute cd ${PREFIX}/target/usr/include
#execute tar xf /tmp/${TARGET}_include
#execute ln -sf /opt/cross/devel/ip_rbs/linux/include/asm ${PREFIX}/target/include/asm
#execute ln -sf /opt/cross/devel/ip_rbs/linux/include/linux ${PREFIX}/target/include/linux
# GCC
if [ ! -f ${PREFIX}/gcc-${GCC_V}_step1 ] ; then
execute cd $SRC
execute tar xzf $PKG/gcc-${GCC_V}.tar.gz
execute cd $BUILD
execute mkdir gcc
execute cd gcc
execute $SRC/gcc-${GCC_V}/configure \
--target=${TARGET} \
--prefix=${PREFIX} \
--enable-languages=c \
--disable-shared \
--with-newlib \
--with-headers=${HEADERS}
execute make
execute make install
execute touch ${PREFIX}/gcc-${GCC_V}_step1
fi
#
#
# GLIBC
if [ ! -f ${PREFIX}/glibc-${GLIBC_V} ] ; then
execute cd $SRC
execute tar xzf $PKG/glibc-${GLIBC_V}.tar.gz
execute cd glibc-${GLIBC_V}
execute tar xzf $PKG/glibc-linuxthreads-${GLIBC_V}.tar.gz
execute cd $BUILD
execute mkdir glibc
execute cd glibc
execute $SRC/glibc-${GLIBC_V}/configure \
--build=i686-linux \
--host=${TARGET} \
--enable-add-ons \
--disable-sanity-checks \
--prefix=${PREFIX}/${TARGTET}
execute make
execute make install
execute touch ${PREFIX}/glibc-${GLIBC_V}
fi
#
#
# GCC again
if [ ! -f ${PREFIX}/gcc-${GCC_V} ] ; then
execute cd $BUILD
execute cd gcc
execute $SRC/gcc-${GCC_V}/configure \
--target=${TARGET} \
--prefix=${PREFIX} \
--enable-languages=c,c++ \
--with-libs=${PREFIX}/${TARGTET}/lib \
--with-headers=${HEADERS}
execute make
execute make install
execute touch ${PREFIX}/gcc-${GCC_V}
fi
#
#
# GDB
if [ ! -f ${PREFIX}/gdb-${GDB_V} ] ; then
execute cd $SRC
execute execute tar xzf $PKG/gdb-${GDB_V}.tar.gz
execute cd $BUILD
execute mkdir -p gdb
execute cd gdb
execute $SRC/gdb-${GDB_V}/configure \
--target=${TARGET} \
--prefix=${PREFIX}
execute make
execute make install
execute touch ${PREFIX}/gdb-${GDB_V}
fi
#
#
# GDB SERVER
if [ ! -f ${PREFIX}/gdbserver-${GDB_V} ] ; then
execute mkdir -p $BUILD/gdbserver
execute cd $BUILD
execute cd gdbserver
execute chmod u+x $SRC/gdb-${GDB_V}/gdb/gdbserver/configure
export CC=mipsel-linux-gcc
execute $SRC/gdb-${GDB_V}/gdb/gdbserver/configure \
--target=${TARGET} \
--prefix=${PREFIX}
execute make
execute make install
execute touch ${PREFIX}/gdbserver-${GDB_V}
fi
execute echo "############ DONE ############"
# TARGET
TARGET=mipsel-linux
HEADERS=/opt/cross/devel/ip_rbs/linux/include
# VERSIONS
#BINUTILS_V="2.12.90.0.12"
BINUTILS_V="2.12.1"
GCC_V="3.1"
GLIBC_V="2.2.5"
INSIGHT_V="5.1.1"
GDB_V="5.2"
DDD_V="3.3.1"
# CONFIGURATION
CROSSROOT=/opt/cross
BASEDIR=$CROSSROOT/production
PREFIX=$CROSSROOT/${TARGET}
BUILD=$BASEDIR/build
SRC=$BASEDIR/src
PKG=$BASEDIR/pkg
LOGDIR=$BASEDIR/log
LOGFILE=$LOGDIR/${0}_`date +%d%m%Y`_`date +%H%M`.log
# PATH
PATH="$PREFIX/bin:$HOSTPREFIX/bin:$PATH"
export PATH
echo "LOGFILE is ${LOGFILE}"
begin:vcard
n:Lange;Carsten
tel;fax:+49 6104 4234
tel;work:+49 30 6104 4228
x-mozilla-html:FALSE
url:http://www.detewe.de
org:Cordless Technology A/S Berlin
adr:;;Koepenicker Str. 180;10997 Berlin;;;
version:2.1
email;internet:Carsten.Lange@detewe.de
x-mozilla-cpt:;0
fn:Carsten Lange
end:vcard
