Re: [patch] linux: declance multicast filter fixes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




I've created declance_2_4.c on http://www.csn.ul.ie/~airlied/mips

for the DS5000/200 series of DecStations..

it only required the BE -> LE and the additional zeroing of the filter, it
already did the mcast_table access correctly... (by luck rather than
design :-)

un-compiled and untested but it should work ..

Dave.

On Thu, 21 Mar 2002, Maciej W. Rozycki wrote:

> Hello,
>
>  Following are a few trivial fixes for the DECstation's LANCE driver
> needed for the chip's multicast filter to be set up correctly.  The patch
> is needed for multicast reception to work, in particular for the IPv6's
> neighbor discovery.  The CRC generation was verified using the AMD's
> reference code and it was checked at the run time for selected multicast
> addresses as well.  Please apply.
>
>  Maciej
>
>

-- 
David Airlie, Software Engineer
http://www.skynet.ie/~airlied / airlied@skynet.ie
pam_smb / Linux DecStation / Linux VAX / ILUG person



[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux