On Tue, Feb 05, 2002 at 05:48:18PM +0800, Zhang Fuxin wrote:
> hi,
>
> I am sorry but it seems i can't fix this without ugly changes.
> since i am not familiar with gcc code, i decide to leave it to you,
> but provide some information instead.
>
> In gcc there are 3 spaces where the NaN handling is assumed the
> Intel way.
>
> 1. gcc/real.c (the most important one)
> here the author seems to have known the NaN pattern problem,so
> he leaves a interface macro for defining non intel NaN patterns:
> (comment of function "make_nan()",at about line 6219)
>
> /* Output a binary NaN bit pattern in the target machine's format. */
>
> /* If special NaN bit patterns are required, define them in tm.h
> as arrays of unsigned 16-bit shorts. Otherwise, use the default
> patterns here. */
>
> I have read through this file and decided that the follow defined should
> be enough for mips:
>
> /* NaN pattern,mips QNAN & SNAN is different from intel's
> * DFMODE_NAN and SFMODE_NAN is used in real.c */
> #define DFMODE_NAN \
> unsigned short DFbignan[4] = {0x7ff7, 0xffff, 0xffff, 0xffff}; \
> unsigned short DFlittlenan[4] = {0xffff, 0xffff, 0xffff, 0xfff7}
> #define SFMODE_NAN \
> unsigned short SFbignan[2] = {0x7fbf, 0xffff}; \
> unsigned short SFlittlenan[2] = {0xffff, 0xffbf}
>
> But the problem is where to put them:(. Obviously it is target specified
> definitions and should be in config/mips/. Documents say tm.h is a symbol
> link and included in config.h,but it is no long true.If i add them to xm-mips.h
> then for native compilation it is ok but it fails for cross-compile.
I am enclosing a patch here.
>
> 2.gcc/reg-stack.c
> There is a hardcoded QNaN used around line 477:
> nan = gen_lowpart (SFmode, GEN_INT (0x7fc00000));
> I sugest defining a macro QNAN_HAS_1ST_FRACBIT_CLEARED for mips and change
> it to,just don't know where to put it:
> #ifndef QNAN_HAS_1ST_FRACBIT_CLEARED
> nan = gen_lowpart (SFmode, GEN_INT (0x7fc00000));
> #else
> nan = gen_lowpart (SFmode, GEN_INT (0x7fbfffff));
> #endif
MIPS doesn't use reg-stack.c.
>
> 3. config/fp-bit.c
> this is for machine having no fpu hardware.
> again i susgest define QNAN_HAS_1ST_FRACBIT_CLEARED and then apply this patch:
>
> 190d189
> < #ifndef QNAN_HAS_1ST_FRACBIT_CLEARED
> 192,195d190
> < #else
> < fraction &= ~QUIET_NAN;
> < #endif
> <
> 379,380d373
> <
> < #ifndef QNAN_HAS_1ST_FRACBIT_CLEARED
> 382,384d374
> < #else
> < if (!(fraction & QUIET_NAN))
> < #endif
This one is tricky. fp-bit.c is not supposed to be target specific. I
think we add SET_QUIET_NAN/IS_QUIET_NAN and provide the special ones
for MIPS.
H.J.
----
2002-02-05 H.J. Lu <hjl@gnu.org>
Base on suggestions from Zhang Fuxin <fxzhang@ict.ac.cn>:
* config/mips/mips.h (DFMODE_NAN): Defined.
(SFMODE_NAN): Likewise.
--- gcc/config/mips/mips.h.ieee Thu Nov 15 12:21:17 2001
+++ gcc/config/mips/mips.h Tue Feb 5 14:38:11 2002
@@ -4637,3 +4637,10 @@ do \
} \
} \
while (0)
+
+#define DFMODE_NAN \
+ unsigned short DFbignan[4] = {0x7ff7, 0xffff, 0xffff, 0xffff}; \
+ unsigned short DFlittlenan[4] = {0xffff, 0xffff, 0xffff, 0xfff7}
+#define SFMODE_NAN \
+ unsigned short SFbignan[2] = {0x7fbf, 0xffff}; \
+ unsigned short SFlittlenan[2] = {0xffff, 0xffbf}
