My Decstation /150 does not get the point
SCSI subsystem driver Revision: 1.00
SCSI ID 7 Clk 25MHz CCF=5 TOut 167 NCR53C9x(esp236)
SCSI ID 7 Clk 12MHz CCF=3 TOut 139 NCR53C9x(esp236)
SCSI ID 7 Clk 12MHz CCF=3 TOut 139 NCR53C9x(esp236)
ESP: Total of 3 ESP hosts found, 3 actually in use.
scsi0 : ESP236 (NCR53C9x)
scsi1 : ESP236 (NCR53C9x)
scsi2 : ESP236 (NCR53C9x)
scsi: unknown type 17
Vendor: Model: > < è½ . Rev:
Type: Unknown ANSI SCSI revision: 01
resize_dma_pool: unknown device type 17
resize_dma_pool: unknown device type 17
Without:
Index: arch/mips/config.in
===================================================================
RCS file: /cvs/linux/arch/mips/config.in,v
retrieving revision 1.151
diff -u -r1.151 config.in
--- arch/mips/config.in 2001/11/26 12:01:08 1.151
+++ arch/mips/config.in 2001/11/27 12:17:26
@@ -292,6 +292,10 @@
define_bool CONFIG_PC_KEYB y
fi
+if [ "$CONFIG_DECSTATION" = "y" ]; then
+ define_bool CONFIG_NONCOHERENT_IO y
+fi
+
if [ "$CONFIG_ISA" != "y" ]; then
define_bool CONFIG_ISA n
define_bool CONFIG_EISA n
Now the current cvs boots until userspace but its not very happy.
-----------------------------------
/etc/init.d/rcS: line 28: 32 Illegal Instruction grep -qs resync
/proc/mdstat
Starting portmap daemon: portmap.
/etc/init.d/rcS: line 57: 39 Illegal Instruction ( trap - INT
QUIT TSTP; set start; . $i )
Setting the System Clock using the Hardware Clock as reference...
/etc/init.d/rcS: line 57: 40 Illegal Instruction ( trap - INT
QUIT TSTP; set start; . $i )
Cleaning: /tmp /var/lock /var/run.
Initializing random number generator... done.
-----------------------------------
Ill dig into this later ...
Flo
--
Florian Lohoff flo@rfc822.org +49-5201-669912
Nine nineth on september the 9th Welcome to the new billenium
PGP signature
