On Fri, Nov 02, 2001 at 09:18:31AM -0500, Marc Karasek wrote: > I should have been more specific, I should have said cross-toolchain. > x86 -> MIPS. I will check out the packages you mentioned below, and > will investigate them as an option. But as of right now, our build > enviroment is still x86 Linux (RH 7.1). We will be targeting a MIPS > processor of our own, I cannot get into too many details. We are using > the Malta board right now for some testing/eval work. But will be > quickly moving to our own platform in the near future. At that time the > Malta will prob be put aside. > See #1 below. H.J. ---- My mini-port of RedHat 7.1 is at ftp://oss.sgi.com/pub/linux/mips/redhat/7.1/ you should be able to put a small RedHat 7.1 on the mips/mipsel box and compile the rest of RedHat 7.1 yourselves. Here are something you should know: 1. The cross compiler hosted on RedHat 7.1/ia32 is provided as a toolchain rpm. The binary rpms for the mips and mipsel cross compilers are included. You may need glibc 2.2.3-11 or above to use those rpms. The glibc x86 binary rpms under RPMS/i386 should be ok. 2. You have to find a way to put those rpms on your machine. I use network boot and NFS root to do it. 3. install.tar.bz2 has some scripts to prepare NFS root and install RedHat 7.1 on a hard drive. 4. baseline.tar.bz2 contains the cross build tree. 5. Since everything is cross compiled from x86, which is little endian, many data files for mips, which is big endian, are either missing or wrong. To get those data files for mips, you have to rebuild/install the folowing rpms: cracklib glibc natively on Linux/mips. Thanks. H.J.
