I'm using busybox 0.60.1 with the latest oss kernel with success. No clue on why your busybox is stuck though. Regards, Brad ----- Original Message ----- From: "Jun Sun" <jsun@mvista.com> To: <linux-mips@oss.sgi.com> Sent: Thursday, September 20, 2001 9:21 PM Subject: busybox does not like 2.4.8, or the other way around? > > I have a small busybox userland that works fine with 2.4.2 kernel, but failed > with the latest 2.4.8 kernel. The symptom is that it is stuck at the > following prompt: > > ================ > .... > Kernel command line: console=ttyS0,115200 ip=bootp > .... > Freeing unused kernel memory: 4k freed > Algorithmics/MIPS FPU Emulator v1.4 > serial console detected. Disabling virtual terminals. > init started: BusyBox v0.51 (2001.07.18-06:43+0000) multi-call binary > > Please press Enter to activate this console. > ================ > > A simple test shows the console is still working, i.e., pressing a key *does* > generate an interrupt and ISR *does* read the correct char value. > > I really cannot think of anything else that might make busybox stuck here. > Any clue? Anybody else is using busybox with more recent kernels? > > Jun >
