Re: ksymoops changes for mips

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Keith Owens wrote:
> Resend, no response.

I tried to send you something via PM, but your email address
gave errors.

   ----- Transcript of session follows -----
   451 <kaos@ocs.com.au>... reply: read error from mail.ocs.com.au.
   <kaos@ocs.com.au>... Deferred: Connection reset by mail.ocs.com.au.
   Warning: message still undelivered after 4 hours
   Will keep trying until message is 5 days old

[snip]
   > >I am updating ksymoops now and need some information.  Could somebody
   > >tell me what this produces on mips?
   > >
   > ># objdump -h ksymoops | head -8
   > ># objdump -h mips64-lsb-vmlinux | head -8
   > ># objdump -h mips64-msb-vmlinux | head -8
   > >
   > >where mips64-[lm]sb-vmlinux are kernels compiled for 64 bit with LSB
   > >and MSB.
   >
   > Sorry, that should have been objdump -x, not objdump -h, I need the
   > architecture type as well as the file format.
   
   What I have is not the "official" CVS kernel but a patched version,
   along with a patched toolchain. It already uses elf64-tradbigmips
   instead of elf64-bigmips and has a different start address as it
   is loaded in 64bit address space. I haven't cared about little
   endian yet (no such hardware).
   
   So it's just for reference for now, possibly it helps.
   
   
   Thiemo
   
   
   -----------------------------------------------------------------------
   
   mips64-msb-vmlinux:     file format elf64-tradbigmips
   mips64-msb-vmlinux
   architecture: mips:8000, flags 0x00000112:
   EXEC_P, HAS_SYMS, D_PAGED
   start address 0xa8000000201b4000
   
   Program Header:


[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux