Re: Re: help on linux-mipsel frame buffer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 18 Jul 2001, Fuxin Zhang wrote:
> 2001-07-18 09:18:00£º
> >On Tue, 17 Jul 2001, James Simmons wrote:
> >> >   First I try the vga16 frame buffer driver,but i can only get
> >> > some black/white strips on the screen.(after made some changes
> >> > to the source,most important one is use pci to find and set the
> >> > vbase address).
> >>
> >> It is hardwired into the vga16fb driver the memory region (0xA000). This
> >> is very wrong on non intel platforms. So that drivers pretty much doesn't
> >> work on anything else.
> >
> >Does your firmware initialize the VGA card to VGA text mode? Vga16fb requires
> >this initialization, which is normally done by the VGA BIOS. An x86
> >BIOS-emulator may be your friend.
> Cound you give me a link to such a emulator?My firmware doesn't initialize VGA card.That seems the real problem.

I don't know whether it exists for Linux/MIPS yet.

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven ------------- Sony Software Development Center Europe (SDCE)
Geert.Uytterhoeven@sonycom.com ------------------- Sint-Stevens-Woluwestraat 55
Voice +32-2-7248626 Fax +32-2-7262686 ---------------- B-1130 Brussels, Belgium



[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux