Re: Maemo 5 - 802.1x PEAP+MSCHAPv2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2014-02-11 20:29 GMT+01:00 Sicelo <absicsz@xxxxxxxxx>:
>> There was problem with self signed certificates and certificates which
>> did not have stored CA in maemo certman. I do not remember if this was
>> fixed or not. Try to check if both CA and certificate itself are
>> installed in Settings --> Certificates.
>
> Yes, these are installed. Whether or not I have them, I still can't connect.
>

Check if certificates did not expired.

>> I do not have any problem with connecting to wifi WPA2 EAP TTLS+GTC or
>> EAP PEAP+MSCHAPv2. Try to check also syslog, if nokias eapd daemon did
>> not write any error message.
>
> This is the message from eapd:
> Feb 11 19:45:26 fremantle icd2 0.87+fremantle10+0m5[1312]: EAP: [9d4b057a-56a6-454f-852c-245c6ff30a55] authentication failed because EAP_FAILED received: EAP authentication failed (com.nokia.icd.error.wlan_authentication_failed)
>

No, this message is from icd2. I do not know if eapd daemon (that
which doing EAP auth) writing something somewhere... check also
cmdline arguments if there is not some debug flag/option. It is bad
that nokias eapd sw is closed :-(

> Would there be some gconf values to edit which could help here?

No idea.

>>
>> Other option is to use wpa_supplicant (which is in extras-devel) and
>> connect manually to wifi network like on any linux machine.
>>
>> I'm using wpa_supplicant for ethernet 802.1X authentification with usb
>> ethernet card connected to n900 in usb host mode and there is no
>> problem.
>>
> Would you be able to show me how to do this with the built-in wifi adapter of the N900? I had previously installed wpa_gui, but could never get the card to show. I'm guessing something keeps it 'locked' always. I tried 'stop wlancond' and 'stop csd' and never got any luck.

I think that wpa_gui probably not working on n900 due to small qt
screen, special hildon qt theme and other qt patches. You need to
write your own wpa supplicant config file. Then stop wlancond and
start wpa_supplicant manually (and then dhcp client...). In wpa
supplicant use wext driver, because new nl does not working correctly
on old 2.6.28 kernel.

And how to write wpa supplicant config file, see man page for
wpasupplicant.conf or use google...

-- 
Pali Rohár
pali.rohar@xxxxxxxxx
_______________________________________________
maemo-users mailing list
maemo-users@xxxxxxxxx
https://lists.maemo.org/mailman/listinfo/maemo-users





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Big List of Linux Books]    

  Powered by Linux