On 29.03.2012 08:18, Pali Rohár wrote: > On Thursday 29 March 2012 07:17:49 James Brown wrote: >> Device - N900 >> OS - Maemo 5 >> V. 21.2011.38-1 (CSSU) >> kernel-power 1:2.6.28-10power50 >> hostmode-gui 0.3 >> >> With that "hostmode-gui" (h-e-n) I can easily initialize >> USB-device but it don't want to mount on my FS with that gui. >> So, I need to mount it (and umount) mannualy. >> Today I found a critical problem with using h-e-n. I did not >> use it from the last summer and I don't remember what of >> version of "kernel-power" I used that time (of course. not >> v.50 as now :) ) and whether I used CSSU or not but I had no >> that problem at that time. (But at that time it needs for me >> to start bme mannualy after closing h-e-n windows becouse it >> didn't start automatically and at one time I even had problems >> with (re)booting my device). >> Now, since today, when I close the "h-e-n" gui, my device >> suddenly is shutting down and I need to boot it for working >> with it. How can I resolve the above-mentioned issues? > > Hi, > > shutdown after closing h-e-n GUI can be caused by starting BME > when bq27x00_battery driver is loaded. BME and bq27x00_battery > cannot be loaded at same time. So make sure that bq27x00_battery > is blacklisted in /etc/modprobe.d/* and also is NOT in list > /etc/modules > Yeah, thanks, there was that problem. After rmmoding bq27x00_battery it works without the problem of device's OS shutting down. _______________________________________________ maemo-users mailing list maemo-users@xxxxxxxxx https://lists.maemo.org/mailman/listinfo/maemo-users
